PTZ Controller SCC-1000 User's Manual
Contents
1. ESC POWER Cancels a command or turns power on off LCD DISPLAY 16X2 LCD Number Pad Enables changing channels or opening and closing the camera OSD 1 LOCK 2 FN 3 AUX 4 SET 5 OPEN 6 CLOSE Locks out the system Function keys Perform special functions in combination with other buttons Controls the camera s AUX output Enters the controller settings menu IRIS OPEN IRIS CLOSE RSET 2 SWING 3 GROUP 4 AIF 5 OSD Sets up and moves to preset locations Commands the camera to move between 2 selected locations while panning or tilting Commands the camera to monitor preset locations at a selected speed and standby time in an orderly manner Performs the One Shot AF function Indicates the camera s OSD menu 1 FOCUS 2 Z00M WIT Manually focuses the camera Zooms the camera in or out To turn on the power press the PWR button To turn off the power hold down the PWR button ID Indicates the current channel number SPD Indicates the current channel camera protocol 9 6k Indicates the current channel camera baud rate Using the number pad enter a number Press the ENT button to confirm the Camera ID e Camera IDs are between 1 to 255 m You can use the joystick to control the camera s Pan and Tilt operations E The farther you move the joystick from the center the faster th2. Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take this item for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product should not be mixed with other commercial wastes for disposal The SCC 1000 PTZ Controller controls the operation of the PTZ Dome and Zoom Camera series and the SRX 100B Receiver Supported Protocols Samsung Techwin SPD PELCO D PELCO P Samsung Electronics SEC Panasonic Vicon AD and Honeywell Controls up to 255 cameras Supports different protocols per channel Supports serial communications for RS 485 422 Supports Pan Tilt Zoom operations using a 3 axis joystick Supports Zoom Focus Iris operations using the controller buttons Supports various camera options Preset Swing Group etc Supports 9V Battery SCC 1000 Power Adapter DC 12V Terminal Block RS 485 422 Signal Wire VIDEO BNC MONITOR RS485 Communications Camera Controller MOON RXD Txi RS485 Communications Camera Controller Ti mi YOO DOO DOT NE TXD TRx You may use the Tx2 or Tx3 terminal instead of Tx1
3. and stability of the installation location Do not drop the appliance on the floor This may result in damage or injury Do not attempt to disassemble the appliance To prevent electric shock do not remove screws or vers lt re are no user serviceable parts inside Contact qualified service personnel for maintenance lever use the appliance in places where there are flammable materials Never use the appliance in places where flammable materials such as gas are used is may result in fire explosion and other serious accidents _ Never touch un insulated parts with we s F N Touching un insulated parts with wet hands m resultin seri ic shock s ner expose ance to water or moisture lt Falk the appliance gets wet immediatelytumthe power off O J 1707 0 Stop using the appliance if it gets wet C the manufacturer immediately i ab a e neratio blem Ups Immediately e power off to the appliance if there is any abnormal condition such as smoke or unusual smells Continuing toluse the appliance under abnormal conditions may result in serious damage eco mended power power source ratings may result in fire electric shock or damage Never damage or modify the connection cable Do not pull expose to heat or place heavy objects on the connection cable Non observance of these warnings may result in fire electric shock or damage e Use the appliance indoors only Do not place the appliance outdoors or ex
4. PTZ Controller SCC 1000 User s Manual Thank you for purchasing a Samsung PTZ Controller Before attempting to connect or operate this product please read these instructions carefully and save this manual for future use ENGLISH e Table of Contents e Safety caution e Main Features and Characteristics 1 Introduction 2 Characteristics e Controller Button Layout e Package Contents e System Diagram 1 Wiring Diagram 2 Connecting RS 485 422 Signal Wires e Names and Functions e Controlling PTZ Camera 2 Initial Screen Display 3 Camera ID Setup 4 Pan Tilt Zoom Using Joystick 5 Iris Focus Zoom Buttons 6 Preset 7 Swing e Setting Up Controll i Troubleshooti gm f Samsung Techwin cares for the environment at all product manufacturing NG stages to preserve the environment and is taking a number of steps to provide customers with more environment friendly products The Eco mark represents eco Samsung Techwin s will to create environment friendly products and indicates RoHS compliant that the product satisfies the EU RoHS Directive e All work related to the installation of this appliance must be performed by qualified service personnel or system installers If the product is connected or installed improperly electric shock fire severe injury and or damage can result e Please install the product on a completely flat floor Always check the strength
5. Tele direction as far as possible 7 ZOOM TELE xxx Select lt YES gt to save the changes and move nan back to the initial screen Select lt NO gt or press the ESC button to cancel changes and move back to the initial screen Move to the far lower side If the power is not turned on Please check if the controller is connected to the power adapter If the joystick does not move or the controller buttons are not pressed There may be a problem with the controller board Please contact your nearest dealer for further assistance If the controller cannot control the camera gt Please check the network cable between the controller and camera gt Please check if you have selected the correct ID for the camera on the controller Please check the protocol and serial settings of the controller and camera LCD Display 16 x 2 Character LCD Speed Control Joystick 3 axis Twist Zoom Samsung Techwin PTZ Dome PTZ Dome an PELCO D P Panasonic Vicon AD Honeywell Samsung R Electronics Compatible Hardware Zoom Gnda SDZ 375 370 Receiver SRX 100B Control Capacity Up to 255 Cameras Suitable for Mid Large size System Standards RS 485 RS 422 Remote Control 1km Distance Communications Transfer Speed 2 400 57 600bps Voltage 12V DC 140mA Operating Temperature 0 45 C Operating Humidity 10 70 Dimensio
6. ber pad MAIN SETUP Hold down the SET button to enter the controller s ka on MAIN SETUP mode Enter the 4 digit password Default Password 0000 After changing the settings select lt YES gt in the SAVE EXIT menu to save the changes and move back to the initial screen To cancel changes and move back to the initial screen select lt NO gt in the Save menu or press the ESC button MAIN SETUP SAVE EXIT 1 e To move between the options move the joystick up or down e To change the value of the settings move the joystick to the right or left e For the default settings values please refer to the picture on the right 2 1 Firmware Version m Displays the current version of the controller firmware pu MAIN SETUP VER x 2 2 Serial Data Transfer Standard MAIN SETUP 2 COMM RS485 2 3 LCD Backlight m AUTO Turns the backlight off automatically if no command has been entered in the last 30 MAIN SETUP seconds ACKLIGHT AUTO E ON Keeps the backlight on at all times m OFF Keeps the backlight off at all times E Select RS 485 or RS 422 PTZ CONTROLLER 15 User s Manual m If no joystick or button input is detected for a set I MAIN SETUP E Enables changing the controller password MAIN SETUP duration the LCD screen turns itself off and enters 8 PASSWORD 4 SLEEP OFF Sleep mode E Resets the controller s current settings to the factory th f controller butt ff Turne the sound ob c
7. e camera moves 4 D m You can also use the joystick to control the camera s Zoom operation Zoom Wide Action Zoom Tele Action Screen Brightness m To adjust the camera s screen brightness use the OPEN and CLOSE buttons OPEN Brighter Iris Open CLOSE Darker Iris Close Camera Focus E To adjust the focus of the camera use the FOCUS button FOCUS Closer FOCUS Farther Camera Zoom E To control the camera s Zoom operation use the ZOOM W T button ZOOM W Zoom Wide ZOOMT Zoom Tele Using the joystick and controller buttons move the camera to a desired location Enter a preset number Hold down the P SET button for 2 seconds to save the preset location Enter the number of a preset location Press the P SET button to move the camera to the preset location You can select preset numbers from 1 to 255 using the controller The maximum preset location number varies depending on the camera model For more information please refer to your camera s user manual You can set up preset locations in the OSD menu of the camera E The Swing function commands the camera to move between 2 selected locations monitoring the route Press the SWING button Press Number 1 or 2 to activate the Swing mode Number 1 Commands the camera to pan while moving between 2 locations Number 2 Commands the camera to tilt while moving between 2 locat
8. ions e To pause Swing move the joystick E The Group command recalls a ground of multiple preset locations in sequence Enter the group number Press the GROUP button to activate the Group mode e To pause the Group mode move the joystick e In order to use Swing and Group modes you must set up the modes in the camera s OSD menu prior to actual operation e The Swing and Group modes only support the Samsung Techwin SPD protocol Pressing the A F button uses One Shot AF E Shows the camera s OSD menu on the monitor screen To enter the OSD menu press the OSD button To exit the menu hold down the OSD button SPD Protocol ENT Button Performs the Enter function in the OSD menu CLR Button Performs the Esc function in the OSD menu To move the menu cursor upward downward leftward or rightward use the joystick Certain protocols Panasonic Samsung Electronics etc do not support using the joystick to move the menu cursor Instead they require pressing a number button while holding down the FN button Number 2 4 6 8 Buttons E Locks out the controller To lock out hold down the LOCK button To unlock enter the 4 digit password Default Password 0000 E Controls the camera s Aux output operation AUX ON Press the AUX button to turn AUX on AUX OFF Hold down the AUX button for 2 seconds to turn AUX off Setting Up Controller Environment 1 PTZ Setup P
9. ns 280 W x 180 H x 100 D mm Weight Approx 0 7Kg Without Adapter SAMSUNG TECHWIN SALES NETWORK SAMSUNG TECHWIN CO LTD 145 3 Sangdaewon 1 dong Jungwon gu Seongnam si Gyeonggi do Korea 462 703 TEL 82 31 740 8151 8 FAX 82 31 740 8145 SAMSUNG TECHWIN AMERICA Inc SAMSUNG TECHWIN EUROPE CO LTD 1480 Charles Willard St Carson CA 90746 UNITED STATES Samsung House 1000 Hillswood Drive Hillswood Business Tol Free 1 877 213 1222 FAX 1 310 632 2195 Park Chertsey Surrey UNITED KINGDOM KT16 OPS www samsungcctvusa com TEL 44 1932 45 5300 FAX 44 1932 45 5325 www samsungtechwin com www samsungcctv com P No Z6806093601A VAN 09 02
10. ontroler buttons on gro MAIN SETUP release default values and optimizes the joystick N F ATOR SE R 5 BUZZER ON calibration E To prevent the attenuation of communication signals between the camera and controller the controller s l Bil naala termination option must be ON if it is located farthest from E the camera and controller communication loop If the controller is in the middle of the camera and controller communication loop turn the termination option off E Select a PTZ serial command transfer cycle for using MAIN SETUP the joystick Shortening the transfer cycle increases 7 JOY SPD 100MS the response speed of the camera Notes Shortening the joystick s serial command transfer cycle may cause certain camera models to not process commands properly To prevent and resolve such malfunctions extend the transfer cycle Press 3 on the number pad Hold down the SET button to enter the Joystick Calibration mode At each option move the joystick as far as you can and then press the ENT button to calibrate JOYSTICK CALI sages PTZ OFFSET x Joystick in the Center sv lt a Q JOYSTICK CALI Move to the far right side 2 PAN LEFT xxx M4 gt JOYSTICK CALI Move to the far left side O 3 PANRIGHT xxx 3 Move to the far upper side v 4 8 JOYSTICK CALI Move to the far lower side 5 TILT DOWN xxx 6 JOYSTICK CALI 6 ZOOM WIDE M4 cw a JOYSTICK CALI Rotate to the
11. pose it to rain or moisture If dropped in water the appliance may be corroded and damaged Do not use the appliance where there is excessive dust smoke or moisture Using the appliance under such conditions may result in fire electric shock or serious damage e Do not operate the appliance in temperatures beyond those specified Excessive heat or cold may damage the appliance Always operate the appliance within the recommended temperature range of 0 C 40 C e Do not place the appliance in direct sunlight This may discolor the appliance Do not apply excessive shock to the appliance Excessive shock may damage the appliance If the controller body gets dirty turn the power off and wipe the surface with a soft cloth Do not use chemical agents such as alcohol or benzene For detailed information on upgrading the firmware please direct your inquiries to the installation vendor Correct Disposal of This Product Waste Electrical amp Electronic Equipment Applicable in the European Union and other European countries with separate collection systems This marking shown on the product or its literature indicates that it should not be disposed with other household wastes at the end of its working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources
12. ress 1 on the number pad PTZ SETUP mn the SET button to enter the PTZ SETUP PASSWORD Enter the 4 digit password Default Password 0000 To change a channel address select a channel by 7 SETUP moving the joystick to the right or left Or you can ADDRES 001 enter the channel number and then press the ENT button Change the Protocol Baud Rate and Parity Bit settings Z SETUP of the select channel MODEL SPD Select the SAVE menu to save the changes You can continue changing the settings by selecting different channels To exit to the initial screen select the EXIT Z SETUP 1 menu or press the ESC button BAUDRATE 9 6 K e To move between the options move the joystick up or down Z SETUP e To change the value of the settings move the joystick e to the right or left e For the default settings values please refer to the picture on the right ZSETUP 1 Protocol Samsung Techwin SPD SAVE Baud Rate 9 6Kbps Parity Bit None ZSETUP 1 EXIT 3 Notes e After changing the settings of a channel you must select the Save menu If you move to a different channel without using the SAVE menu the changes will not be saved Under Controller Serial Setup Data Bit is fixed to 8 and Stop Bit to 1 Serial values of the controller and camera must match each other PTZ CONTROLLER 14 User s Manual Q Setting Up Controller Environment 2 Controller Main Setup Press 2 on the num
Download Pdf Manuals
Related Search