User manual 729776
Contents
1. PHYSIK CHEMIE TO LID LD DIDACTIC 10 14 W2010 Wei Instruction Manual 729 776 EIB KNX Weather Station with GPS Connection for network voltage 230 V L1 Connections for EIB KNX bus Label plate Connection to PE loop through Connection for network voltage 230 V N Rain sensor Weather station Wind sensor Fan 0 Fan control OONOORWDND gt 729776 LEYBOLD C00 INA MATHER STATION WAT GPS 1 Description Safety notes This EIB KNX weather station with GPS serves to teach how a modern multifunction sensor on the EIB KNX bus works 2 Scope of Supply e EIB KNX weather station with GPS experi mental board e Operating instructions 3 Technical Data e Supply voltage via KNX e Weather station auxiliary voltage built in e GPS built in e Auxiliary voltage 230 V 50 Hz e Temperature sensor 30 80 C e Wind sensor 0 35 m s e Brightness sensor 0 150 000 Ix LD DIDACTIC GMBH Leyboldstrasse 1 D 50354 Huerth Germany Phone 49 0 2233 604 0 Fax 49 0 2233 604 222 e mail info Ild didactic de by LD Didactic GmbH Printed in the Federal Republic of Germany Technical alterations reserved Instruction Manual Page 2 2 4 Functional Description The ETS software which is not part of the device but is Ad Proarammin available for purchase separately e g under article 4 1 _ Frogramming i On delivery the device has the bus address UMOR 2 aA A PrO FANNS EEN EE 15 15 250 Another add2. dingly to the left for lower wind speeds Please make sure a particular position of the knob does not always lead to the same wind measurement Then close the housing again by placing the lid over the bottom section The lid must engage on the right and the left with a clear click Remarks e After applying the auxiliary voltage the device is in the initialization phase for a few seconds During this time no information is receivable by the bus e The wind measurement along with all wind switching outputs can be emitted only 60 seconds after applying the supply voltage 4 2 Programming with ETS At the time of printing of this instruction manual the device has more than 254 communication objects LD DIDACTIC GMBH Leyboldstrasse 1 D 50354 Huerth Germany Phone 49 0 2233 604 0 Fax 49 0 2233 604 222 e mail info ld didactic de by LD Didactic GmbH Printed in the Federal Republic of Germany Technical alterations reserved
3. ress is programmable in the ETS by overwriting the address 15 15 250 or the B programming key on the circuit board inside the 26 OOR housing can serve to teach it a different address ome a Proceed as follows to access the programming button Ea 2 Oeicription The weather station s lid engages with the rain sensor Doain tee orca on the right and left of the lower edge see illustration cA tec namene eo below Remove the lid from the weather station by is seronnsona a unclicking and lifting it 28 eter me Proceed carefully to avoid severing the cable link between the circuit board in the bottom section and the rain sensor in the lid You can find a list of all communication objects in the ____ __ 1 device s operating instructions enclosed with the f Ao device a To incorporate the device into a project you must integrate the product database Then you can select the device and incorporate it a lt x 4 3 Function j 4 3 1 GPS The GPS data and temperature are measured directly If you cannot establish a GPS connection position the device near a window 4 3 2 Temperature The temperature is measured directly The programming key is in the position shown in the following illustration 4 3 3 Rain A moist cloth can simulate rain 4 3 4 Wind The built in fan can simulate low wind speeds Turn the knob to the right for higher wind speeds and correspon
Download Pdf Manuals
Related Search