Receiver BEDIENUNGSANLEITUNG USER
Contents
1. SATELLITE DISH 5 Operation and Menu Program Main Menu Press on the remote control unit RCU 2 Radio Channels or press DI on the front panel of the receiver allparenulliGontol 1 TV Channels Press MENU to display Main Menu on the screen 4 Timer Select menu using channel up down keys or numeric keys Please note that OK is always a confirmation of your selection To return to the previous menu press MENU 6 Installation 7 Select Satellite 8 Common Interface Installation Lock Installation Enter PIN code 1 Program Satellites 3 User s Setting 4 LNB Setting 1 TV Channels 2 Radio Channels 3 Parental Control 4 Timer 5 Advanced Installation 0000 6 Installation 7 Select Satellite p n e e The initial code is set as 0000 and you can change it see Change PIN code in page 39 Above menu for inputting the PIN code is displayed only when the Installation Lock is set as ON EI LNB Type Index 1 8 Select the LNB Setting menu in the Installation AZIO 0 22kHz Control Off LNB Power On Other parameter values should be changed manually according to your LNB type Press the OK key to confirm your selection Refer to the Signal Quality bar and the Signal Level bar at the bottom of the screen It is recommended that the signal is at the Medium level or higher If it is not2. or Edit Radio Channel menu To include a channel in the FAV list select a channel and press the blue key on the remote control To select a favorite channel from the FAV list press the FAV key To view a thumb nail representation of the currently selected channel press the VIEW key on the remote control Edit Radio Channel Use the same procedure for the Radio Channel s as used for editing the TV Channels as above Edit Transponder To delete a transponder press the gt when the highlighted bar is located at the transponder you want to delete To add a transponder press SAT key And then Edit Add SAT or TP menu will be display ed and you can add a transponder in that menu Edit Radio Channel ASTRA 11 Hit Liste 13 Classic Rock 14 Soft Rock 15 Generation Lock 16 Love songs 17 Dance 18 REE Status To return to the previous Menu press MENU Edit Transponder ASTRA To return to the previous Menu press MENU Edit Satellite To delete a satellite press the gt when the highlighted bar is located at the transponder you want to delete To add a satellite press the SAT key And then Edit Add SAT or TP menu will be displayed and you can add a satellite in that menu Select Satellite To move to another satellite you want to watch press the 2 HOTBIRD Edit Satellite m To return to the previous Menu press MENU Select Satellite
3. SAT key on the remote control and choose the proper satellite 3 EUTELSAT with the channel up down keys A V Press OK to confirm Common Interface From here you will get access to information and menus connected to the CI module This information may vary a lot depending on the service provider Please see the documentation delivered together with your CI module ALT Audio If more than one audio channel is provided by the broadcaster on a specific channel you can activate the audio mode display by pressing the e key Common Interface Slot 1 Module not installed Slot 2 Module not installed To return to the previous Menu press MENU TV Guide While watching or listening to any channel Now ifyou want to know more information regarding 1 Henan 1 No Information No Time the program shown press the GUIDE E ey one 2 Henan 2 No Information No Time remote control to display the TV Guide or the Radio Guide 3 Hubei 1 No Information No Time You can move to another channel by pressing the 4 Hubei 2 No Information No Time A Y keys and step through the time zones by 5 Fujian 1 No Information No Time pressing the lt P keys mE 6 Fujian 2 No Information No Time The title contents of the program and playing time zone for each channel are available only when the ORA No informatonzzjo sime information provided bv the broadcaster 8 LNTV No Information Time TV Radio p I i If
4. The Volume and Channel keys control the two most frequently used functions of the receiver The cursor keys are for channel A W and volume f gt The OK key is used to select a program a highlighted line or parameter value Sc MMASTER J The Page UP Down key is used to move up or down a page inthe channel list The Recall key selects the previously viewed channel The TV RAD Radio key switches between TV and radio mode Select the audio language or the sound track you want among data to be transmitted from the satellite To return to current channel press m or EXIT FAV The FAV key shows a list of your selected favorite channels o The VIEW key shows a thumbnail representation of the current channel SAT The SAT key shows a list of selectable satellites 4 Getting Started Please do NOT PLUG the receiver into Mains until you finish making all connections to the unit Connect the coaxial cable from the satellite dish to the LNB IN socket of the receiver Connector should be adapted finger tight Receiver to TV with SCART Connect the SCART on the receiver with the SCART of TV SATELLITE DISH x p pvc fo DO NOT EXPORE TO RAIN OR OSTURE IF OUT LNB IN 400mA Max SE TV OUT ANTIN SE Receiver to VCR TV with SCART Connect the TV SCART on the receiver with the SCART of TV Connect the VCR SCART on the receiver with the SCART of VCR
5. please adjust your satellite dish Step Move Ww Search Type Auto Search This menu is to align your dish to the selected a satellite After setting the parameters press the OK kev n to store the parameter values And Start earch E Press OK to search the channels of transponder you want If you are unable to get any signal quality please check the LNB Setting to ensure you have selected the correct LNB and switch settings In case you are using the DiSEqC positioner you should set the most east satellite and most west satellite you want on the Position bar Most East satellite change the satellite name into you want by the most east satellite on the Satellite bar and move to Position bar and press the Volume down key 4 until the Signal Level is at the medium level or higher And press the OK key to store this satellite as the most east satellite Most West satellite change the satellite name into you want by the most west satellite on the Satellite bar and move to Position bar and press the Volume up key until the Signal Level is at the medium level or higher And press the OK key to store this satellite as the most west satellite Then start the Auto Search to search and store the TV channels and Radio channels of the satellite automatically Auto Search ASTRA 1 TV Channels Radio Channels Searches the satellite selected for TV channels and 153 ARTE MUSICALS
6. Radio channels which are then stored and shown 154 CARSAT QE AE 155 Beta BC COUNTRY on the screen 456 BD1 NEW CNTRY LATIN KL SYMPHON KLASSIK OPER TV channels are shown on the left 157 TAQUILLA 6 i i 158 TAQUILLA 7 Radio channels are shown on the right 160 ESTILO Note Do not press POWER on the RCU or GhanneliSearshingiStatus on the receiver while doing Auto Search All 0 other keys of the RCU will not work during x searching TUER Fred 55 50 100 User s Setting Language Setting User s Setting Menu Language English 1 Language Setting LETRA VITIS TERTII TET TA English 2 Local Time Setting 2nd Audio Language English 3 A V Output Setting Subtitle Language English 4 Unit Information s To return to the previous Menu press MENU You can select the desired language for the OSG On Screen Graphics display using the gt keys when the Menu Language option is selected Similarly you can selected a different audio channel when the Audio Language option is selected This option allows you to select a different language to listen to if supported Subtitle Select Subtitle language at Select Language Setting menu While watching your wanted channel the subtitle shall be displayed only when the selected subtitling language is provided by the broadcaster To check if subtitle language is available press EJ key on the remote control unit th
7. key on the Start Upgrade bar Checking new software is displayed on the TV screen then search the software FEC AUTO 1 If there is no new software for upgrading Start Upgrade following messages are displayed No new software on the TV screen None on the LED displayed on the front panel Then the present channel is displayed on the screen 2 If there is a new software for upgrading the software upgrade is started and OTA is displayed on the LED After finishing upgrading done is displayed on the LED and Upgrade completed on the screen Then the present channel is displayed Note 1 Please do not turn off the receiver while upgrading 2 In case of putting in wrong data for the upgrade press OK key on the Set Default bar Reset Factory Default CAUTION All the information of satellite and transponder to be edited by the user will be initialized by this process To return to the previous Menu press MENU If you want to reset all the data edited press OK twice 6 Specifications 1 Tuner amp Channel Input Connector Output Connector Frequency Range Input Impedance Signal Level IF Frequency IF Bandwidth LNB Power amp Polarization 22KHz Tone Demodulation Input Symbol Rate FEC Decoder MPEG Transport Stream A V Decoding Transport Stream Profile amp Level Input T S Data Rate Aspect Ratio Video Resolution Audio Decoding Audio Mode S
8. BEDIENUNGSANLEITUNG USER MANUAL JE wc BEN A d j Digital j 4 d Hu safellifem Receiver SKYMASTER DCI 9210 DIGITAL SATELLITE RECEIVER DCI 9210 CONTENTS 1 Features 31 2 Front amp Rear View 32 3 Remote Control Unit RCU 33 4 Getting Started 34 S Operation and Menu Program 35 6 Specifications 45 Trade Mark of the DVB Digital Video Broadcasting Project 1700 Broadcasting 1 Features QV tn dA U N ai e nm Ln uU N 14 1 1 1 18 19 20 2 22 23 24 29 26 27 28 tA 29 MPEG II video MP ML MPEG I audio Layer 1 Layer 2 digital amp fully DVB compliant Capable of scanning the frequency for SMATV IF system Plug amp Play installing program set up On screen display with 256 color full resolution LD quality video CD quality audio Compatible with DISEqC 1 2 RS232C port for additional information service and updating IRD control software Displays signal level to set up the satellite antenna with ease Power recovery function 64 Step Volume control Powerful editing facilities PIDs TV or Radio Channel Channel Name Satellite Name Transponders Teletext supported your TV needs teletext for this Subtitle supported with optional background S PDIF Sony Philips Digital Interface for digital audio Favorite channel function up to 96 channels
9. SCPC MCPC receivable from Ku Band satellites Capable of receiving unencrypted free digital programs User friendly OSG menu with full function IR remote control unit RCU Last channel memory function Variable aspect ratio 4 3 16 9 with pan vector EPG for on screen channel information Parental lock Installation Lock Receiver Lock Multi lingual function according to the satellite and program provider Total 2 000 Channels programmable TV 1 500 CH amp Radio 500 CH Over the A ir software program downloadable 2 x Common Interface for taking up PCMCIA modules 2 Front amp Rear View FRONT PANEL Channel Up Down 2 CAM slot To turn the receiver on off stand by AC power cord LNB input C i IF OUT o ew OQ A LA TVOUT ANTIN lt gt Ant input RF output ntenna inpu connector to TV Note All cables used for connecting the receiver should be well shielded type cable 3 Remote Control Unit RCU Switches the Receiver ON OFF Switches the sound ON OFF The EPG key shows program information of the selected channel EPG Electronic Program Guide Shows Subtitle menu to select the subtitle language Shows program information provided by the broadcaster Direct choice of TV Radio channel and other commands by numeric keys When you want to see the main menu or return to the previous menu Return to the current video viewing at any time
10. ampling Rate Memory Flash Memory Program DRAM EEPROM 1 x F type with Loopthrough 1 x F type 75 Ohm IF signal out 950MHz to 2150MHz 75 Ohm 25 to 65dBm 480MHz 36MHz Vertical 13 5 14 5V Horizontal 17 5V 18 5V Frequency 22kHz 2kHz Amplitude 0 6Vp p 0 2Vp p QPSK 2 32Msps Convolutional Code Rate 1 2 2 3 3 4 5 6 and 7 8 with Constraint Length K 7 MPEG 2 ISO IEC 13818 Transport Stream Specification MPEG 2 MP ML 80Mbit S Max 4 3 16 9 with Pan Vector 720 x 576 PAL 720 x 480 NTSC MPEG Audio Layer 1 2 Musicam Stereo Dual Channel Joint Stereo Mono 32 44 1 and 48kHz up to 2 Mbytes 8 Mbytes 2 Kbytes 4 A V amp Data In Out SCART RGB Video Out S PDIF Out Analog Audio Out Data Interface Power Supply Input Voltage Type Power Consumption Protection Physical Specification Size W x H x D Weight 7 Environment Operating Temperature Storage Temperature TV x1 VCR x 1 TV x 1 SCART socket RCA X 1 RCA x 2 L CH x 1 R CH x 1 2 x SCART socket TV VCR Resolution 16bit DAC Output Level 2Vrms Max Volume amp Mute Control RS232C BAUD Rate 115200 Max 9Pin D SUB AC207 253V 45 55Hz Linear PWM 30W Max Below 7W Max For Standby Mode Separate internal fuse and chassis grounding The Input shall have lighting or Electric Shock Protection 250mm x 40mm x 200mm about 2 Kg 5 50 C 40 65 C 3972 10 2001
11. e channel Press gt keys to move one page up or down to High channel to Low channel Timer You can reserve the Tum On Tum Off time of the receiver and sleep time on this menu You can edit the TV channels and Radio channels TP and Satellites on this menu If the Installation amp Edit Lock is ON enter the PIN code For more information refer the page No 10 TV CH ASIASAT2 4 Hubei 1 5 Hubei 2 6 Fujian 1 7 Fujian 2 8 SAT TV Radio CH ASIASAT2 1 Al Quran Alk Kar 2 VoiceOfTheKingd 3 DW1 6 YLE 7 WRN Timer Turn on lt Off gt Turn off 4 Off gt Sleep time Minute Local Time 1 Edit TV Channel 2 Edit Radio Channel 3 Edit Transponder 4 Edit Satellite Edit TV Channel You can move to the channel that you want to edit by using the A V keys Also you can move to the highlighted bar directly by inputting the channel number Press the OK key to select the channel you want to edit and then you can move the channel to the position you want or delete it If you want to view the current TV channel press VIEW key on the remote control FAV Channels Edit TV Channel ASTRA 11 Paris Premere 12 Voyage 13 Contact TV 14 LCI 15 Canal J 16 DF 1 Info Kanal 17 Star Kino 18 CNN Status To return to the previous Menu press MENU You can create a group of up to 96 channels in the Edit TV Channel
12. en all the available subtitle languages will be shown on the screen Local Time Setting Local Time Setting You can set the area of the selected place time zone and summer GMT usage lt Yes gt time On Off You can adjust the time from 59 to 59 minutes by Selected time zone using the Time offset Time offset 00 Local Time 01 27 A V Output Setting Aspect Please select your TV format AN Output Setting 4 3 for normal screen TV Aspect 41 43 1 16 9 for wide screen TV 3sec Sub backg You can select OSG viewing time of the information DUAL about the current channel amp program among 2 3 4 5 6 8 10secs by using volume up down keys Sub backg Select On for Subtitle background on TV Subtitle background AC 3 Out If this parameter is set as ON you can enjoy the Dolby Digital sound on the channel provided this function Note To enjoy this sound you should first connect the S PDIF socket of the receiver to Digital Audio Amplifier Unit Information Unit Information Model Name 1 1 1 1 SIW Version You detailed information of this robin receiver on this menu Company Name XXXXXXXX To return to the previous Menu press MENU SMATV Configu ration SMATV Configuration Symbol rate alternative 1 27500 A Satellite Master Antenna Television SMATV system gd ed HE e 2 which is i
13. llation amp Edit Lock u Chan ge PIN Code Preprogrammed PIN Personal Identification Number code is set as 0000 If you want to change it please follow the procedure shown above Receiver Lock If Receiver Lock is On you have to input the correct code to operate the Receiver Installation amp You can not enter directly into installation menu and Edit menu when In Edit Lock stallation amp Edit Lock is On TV Channel Lock TV Channels Press OK to lock unlock the selected channel Locked channels will be skipped when scrolling l Note The color of the highlighted bar turns to Grey when it is a locked channel You can see the current channel display on Channel Unlocked this menu If you want to view the current TV channel press VIEW key on the remote control To return to the previous Menu press MENU TV Channels You can select the channel you would like to watch either by pressing the numeric keys for the channel number or by moving the highlighted bar to the channel of your choice using the A W keys Press the OK key to select the channel Press the gt keys to move one page up or down to High channel to Low channel Radio Channels You can select the channel you would like to watch either by pressing the numeric keys for the channel number or by m oving the highlighted bar to the channel of your choice using the W keys Press OK key to select th
14. ntended for the distribution of television and Symbol rate alternative 3 sound signals to household in one or d 6 more adjacent buildings FEC Auto Start Auto Search A SMATV System represents a means for sharing the same resources among several users for satellite and terrestrial reception and it is designed to perform the adaptation of the satellite TV signals to the SMATV channel characteristics This receiver has a SMATV IF facility to operate this SMATV This configuration allows the direct distribution of the QPSK signal received from the satellite to the SMATV IF distribution network in the extended IF band above 950 MHz Before you start you have to check your condition whether it is possible to use this facility or not in your households You can ask your household supervisor If this receiver is connected to a SMATV network select SMATV Configuration The most common alternatives for Symbol rate and FEC are already preprogrammed When you need to change the Symbol rate for the exceptional frequency select as you know Move to Start Auto Search and just press OK Then the Auto Search procedure will start Parental Control Parental Control 1 Change PIN Code 2 TV Channel Lock Parental Control Enter PIN code Change PIN Code Current PIN code 22221 0000 3 Radio Channel Lock New PIN code 22221 Verifv PIN code 4 Receiver Lock 5 Insta
15. you want to view the current TV channel press Radio Next morenie VIEW key on the remote control Advanced Installation Current Time 00 00 Edit Add SAT or TP A Satellite lt ASTRA gt You can edit a pre programmed satellite name and add a new one in this menu Also you can edit and add Transponder Frequency parameter by using the gt keys AUTO 2222222 To add a new satellite name press OK after moving keyboard will be activated After entering new satellite name and press OK on the Save on the keyboard And then you can set each parameters by giving the data for Transponder Freq LNB Polarization Symbol Rate To edit an additional transponder on a pre programmed satellite you should input all the required data after moving to the satellite you want to edit TP Sign LNB Pol Channel Video PII Audio PID 0 PCR PID Auto Signal Level 63 No signal Edit LNB Local Frequency M lt 10678 gt You can edit up to 8 local frequencies by using numeric keys pas Local Freq Editing Numeric key 1 ave newly edited fr n And if you want to save newly edited frequency key press OK To return to the previous Menu press MENU Software Upgrade In this menu you can upgrade the receiver with new n cmo software being provided from the satellite After putting in the correct data provided by the broadcaster and pressing OK
Download Pdf Manuals
Related Search