User Manual - Sütron electronic GmbH
Contents
1. After you click on the OK button or confirm with Enter the system tries to establish a connection to the device An information window is displayed while the connection is being set up After a connection has successfully been established the system displays either the password protection dialog or the main screen displaying the screen contents of the device If a connection can not be established an error message is displayed You have the following options Yes A dialog with potential causes of errors will be displayed Then the system tries to establish a connection again No The system tries to establish a connection again Cancel The process is aborted and TSDiag exits 5 1 S S TRON Client Functions 5 1 2 Password Request Provided that the password protection is activated on the server the system displays the dialog Password Request which requests that you enter a valid combination of user name and password for this device If the client settings already contain a default user name it is automatically entered into the User Name input field and the cursor moves to the Password input field Password request Please enter the access data for this device User name Figure 5 2 Password Request dialog After you confirm your entries the password is encrypted and transmitted together with the user name to the server The server analyzes the entries and if the name and password are correct starts2. Server Functions 4 2 3 Settings This button brings you to a dialog in which you can adjust all the settings that influ ence the behavior of the server during operation The individual sub items are ex plained in more detail below 4 2 3 1 Security Prompt Before displaying the dialog for adjusting the settings the system issues a security prompt This asks you to enter the administrator password that is the password of the user Admin and is designed to secure the server against unauthorized manipu lation E The user name is case insensitive since TSDiag version 1 4 This password is initially set as 123456 after the installation but you should change it for security reasons Authentication required To make changes to the settings you need extended authority Please enter the password of the administrator Figure 4 2 Authentication Required dialog The Settings dialog is only displayed after the correct password has been entered General settings User management Log file settings Figure 4 3 Settings dialog 4 3 S SUTRON Server Functions 4 2 3 2 General Settings In this dialog you can adjust the basic operational data such as the startup stop and update behavior as well as the password protection to suit your requirements General settings x General Activation of Password Auto start Auto close Idle time min BH N
3. 12 To complete the installation press the Close button After you have executed the individual steps you can start and use TSDiag with the links on the desktop The TSDiag server is started automatically after the automatic installation After the interactive installation you have to restart the server manually with the desktop shortcut The TSDiag server is started automatically each time you restart the operating device If for any reason the changes made in the registry are lost for example if you manually delete the registry or execute an image update you can restart the installer at any time The settings specified in the meantime and the users created are saved in files in the installation directory and are thus retained if you perform a reinstallation 3 3 S S TRON Installation 3 3 Files for the PC The following files are created on the PC during the installation Table 3 1 Files PC File Name Storage Location Time Created TSDiag Client CE exe Installation folder TSDiag Installation TSDiag Client Ink link to client Desktop Start menu Installation SRD_Connections dat Installation folder TSDiag First client start TSDiag _Server_PC exe Installation folder TSDiag Installation TSDiag _Server_Autoload_PC exe Installation folder TSDiag Installation TSDiag _Log log Installation folder TSDiag First server start
4. 15 seconds the other clients are notified that operation is possible again The first client to transmit a command to the server is then enabled 5 3 S S TRON Client Functions Str Esc Taste Alt Tabulator Taste Restart TSvisRT Quit TSvisRT Restart Device 5 2 3 Tools This menu provides additional functions that will considerably simplify your work with TSDiag and the Sutron operating devices These functions are Opens the Start menu on the target computer Opens the task manager on the target computer This function allows you to restart the TSvisRT runtime environment You need to do this when you transfer new drivers or application data because they can only be de tected and imported after you carry out a restart If you exit TSvisRT it is automatically restarted within a few seconds This function enables you to exit TSvisRT permanently that is until the next time you restart the device or until you start the TSvisLD CE exe loader program manually This function triggers a complete restart of the operating device This is particularly useful after you update the boot loader or the operating system image to ensure that the changes take effect If you restart the operating device this can affect other devices and machines that are communicating with it Before carrying out a restart you should therefore make sure that it will not result in any undesired secondary effects 5 2 4 File Transfer
5. The Main Dilla don aies ae rennais 4 1 4 2 1 ER E A 4 2 4 2 2 el 4 2 4 2 3 El ET 4 3 4 2 3 1 Security ul 4 3 4 2 3 2 General Settings ET 4 4 4 2 3 3 User Manag ment 52 ERE ir iraidd raean iarsa Er rs 4 5 4 2 3 4 ee SET le CTT 4 6 4 3 Setting up a Connection 4 7 5 ERKENNEN 5 1 5 1 Setting up a Connection 5 1 5 1 1 Selecting the Destination Computer eee 5 1 5 1 2 Password Request 5 2 52 The Malh S fee E 5 2 5 2 1 l Eeer Ee ee eege 5 3 5 2 2 VIE 5 3 5 2 3 ele 5 4 5 2 4 File Trans aiceann ne reed se tete sner aient 5 4 5 3 Canceling a Connection 5 5 A NN re A 1 S suTRON Overall Table of Contents S SUTRON Important Notes 1 Important Notes P PPP 1 1 Symbols The symbols in this manual are used to draw your attention on notes and dangers This is the safety alert symbol It is used to alert you to potential personal injury haz ards Obey all safety messages that follow this symbol to avoid possible injury or death DANGER This symbol is used to refer to instructions which if ignored or not carefully followed will result in death or serious injury WARNING This symbol is used to refer to instructions which if ignored or not carefully followed could result in death or serious injury CAUTION This symbol is used to refer to instructions which if ignored or not carefully followed could result in minor or moderate injury NOTICE This symbol and the accompanying text alerts the
6. to the device No interaction on the server side is reguired to set up the connection However another information window that enables an operator working on the de vice to prevent remote access is displayed before the first transfer of screen con tents This information window closes automatically after a maximum of ten seconds and the connection is released If a user prevents access a message is sent to the accessing client and the connec tion is broken In this case the server waits for other incoming connections A maximum of 8 clients can be connected to a server simultaneously Additional con nection reguests are rejected 4 7 S SUTRON Server Functions 4 8 S SUTRON Client Functions 5 Client Functions 5 1 Setting up a Connection Depending on the server settings you can set up a connection in only a few steps as described below 5 1 1 Selecting the Destination Computer After you launch the client software a dialog asking you to enter the computer name or the IP address is displayed If a connection to the desired device was set up pre viously you can select the data from a drop down list In this case the entries in the list are sorted chronologically so that the last connection established appears at the top TSDiag Target computer Please enter the name or address of the destination computer H Network port 1661 Figure 5 1 Dialog for selecting the destination computer
7. PC To enable communication between client and server to be established the server and the client must be in the same subnet within the network The amount of memory required on the operating devices is very low the server and client have a combined memory requirement of less than 500 KB Added to this is the memory required by the log file However its size is determined by the set tings The client for the PC requires less than 50 KB on the hard disk 2 1 S SUTRON General Description S SUTRON Installation 3 Installation 3 1 Installing on a PC As of TSwin net version 4 10 the PC client is integrated into the interface and can be started from the menu Tools TSDiag To use the client server without TSwin net on a PC a installation is required Run the file TSDiag Installer PC exe to do this After installation appropriate entries Sutron gt TSDiag available in the Windows start menu The link TSDiag Client starts the client Start the server via the link TSDiag Server Because the program stores the connection data in a file it is advantageous if all us ers that are working with TSDiag have write authorization for this directory The TSDiag server supports a color depth of 8 and 16 bit If necessary reduce the color depth of the operating device or PC 3 1 S SUTRON Installation Automatic installa tion server 3 2 Installing on an Operating Device First
8. TSDiag Ink link to server Desktop Start menu Installation settings dat Installation folder TSDiag Installation users dat Installation folder TSDiag Installation All settings that can be adjusted in the TSDiag are saved in the file settings dat This file is encrypted and is protected by a check sum Therefore you should not edit the file manually The users are stored in the file users dat which is also protected To enable you to use the same users on multiple computers or operating devices without having to create them manually you can copy the user file from one device to another The users are then available the next time you restart the TSDiag server 3 4 Files for the Operating Device The following files are installed for operating devices Table 3 2 Files File Name Storage Location Time Created TSDiag _Client_CE exe Installation folder TSDiag Installation TSDiag Client Ink link to client Installation folder TSDiag Installation SRD_Connections dat Installation folder TSDiag First client start TSDiag _Server_CE exe Installation folder TSDiag Installation TSDiag _Server_Autoload_CE exe Installation TSDiag _Log log Installation folder TSDiag First server start Installation folder TSDiag TSDiag Ink link to server Installation folder TSDiag Installation settings dat Installation fol
9. reader to a situation which may cause damage or malfunction to the device either hardware or software or sur rounding property Reference to source of information This symbol refers to detailed sources of information on the current topic 1 2 Safety Notes Read this manual carefully before using the software Keep this manual in a place where it is always accessible to all users The user manual in particular the safety notes must be observed by all person nel working with the software and the programmed device Observe the accident prevention rules and regulations that apply to the operating site Installation and operation must only be carried out by qualified and trained per sonnel 1 1 S SUTRON Important Notes 1 3 Intended Use The software is to be used exclusively for remote diagnostics of operating devic es located in a network Any other use is not permitted WARNING Danger of life Do not use this software for remote operation of safety relevant machinery or sys tems It is also not permitted to use this software for teach in of machines and systems for which parts of the safety chain are put out of operation 1 4 Target Group All configuration and programming work in connection with the automation system must be performed by trained personnel only e g qualified electricians electrical en gineers The configuration and programming personnel must be familiar with th
10. 1 1 Intended use 1 2 T L Target directory for file transfer 5 4 Log file Tatta eer 1 2 Maximum number of entries 4 7 EE 5 4 Set storage location 4 6 ele EE 4 6 U View 4 6 User Change EE 4 5 Delete 2225 names 4 5 User management 4 5 Z Zoom factor 5 3 A 1 S S TRON Index A 2 S SUTRON S SUTRON
11. SSS S SUTRON User Manual TSDiag Part Number 80860 691 Version 5 Date 2011 05 27 Valid for TSwin net TSDiag 1 5 2 TSDiag Version Date Modifications 1 2006 02 13 First edition 2 2006 06 01 New Layout product name changed 3 2010 09 21 Update to TSDiag 1 5 0 4 2011 05 12 Customizations on chapter 5 5 2011 05 27 Enlarged installation for Pro Line This manual including all illustrations contained herein is copyright protected Use of this manual by any third party in departure from the copyright provision is forbidden No part of this manual may be reproduced trans lated or electronically or photographically archived or altered without the express written consent from Sutron electronic GmbH Violations shall be cause for damage liability Sutron electronic reserves the right to make any changes that contribute to technical improvement S SUTRON Overall Table of Contents Overall Table of Contents 1 IMponant Notes E 1 1 1 1 P pote KS Rh 1 1 1 2 Safety EE 1 1 1 3 Intended Use nina states Egeter 1 2 1 4 Target Group sienne 1 2 2 EE e 1161101 O O An 2 1 2 1 General Operating Conditions e 2 e4 2eeeeeeeeeeeeeeeeeeeee een 2 1 3 a tal ANON no otok AO A 3 1 3 1 Installing on a PDC 3 1 3 2 Installing on an Operating Device 3 2 3 3 Files for the PO iscrisse aaa ai raan 3 4 3 4 Files for the Operating Device UV 3 4 4 Server le 4 1 4 1 Starting the Servers iii idem 4 1 42
12. You can use the File Transfer menu item to transfer files from the client to the server A dialog opens in which you can select the file that you want to transfer The system then transmits the file name and the size of the file to the server The server in turn opens a window in which you can choose the directory for the file Since this window is also transmitted via the remote connection there may be a slight delay before it is displayed In the case of small operating devices you may find that the OK and Cancel buttons in the selection dialogs are not visible because they are output outside the displayable area In this case you can use the following keyboard controls Enter is equivalent to the OK button Escape has the same effect as clicking on the Cancel button After you select the target directory the system checks whether enough memory is available and then starts the transfer The transfer progress is displayed in a sepa rate window While the file transfer is taking place no commands are sent from the client to the server and the screen contents are transmitted much less frequently This ensures that the file transfer is faster and more stable After the transfer is completed the progress window closes and the transfer intervals are set to their normal values again 5 4 S SUTRON Client Functions 5 3 Canceling a Connection To cancel the connection from the client you only have to close the main screen Be f
13. der TSDiag Installation users dat Installation folder TSDiag Installation All settings that can be adjusted in the TSDiag are saved in the file settings dat This file is encrypted and is protected by a check sum Therefore you should not edit the file manually The users are stored in the file users dat which is also protected 3 4 S SUTRON Installation To enable you to use the same users on multiple computers or operating devices without having to create them manually you can copy the user file from one device to another The users are then available the next time you restart the TSDiag server 3 5 S SUTRON Installation S SUTRON Server Functions 4 Server Functions 4 1 Starting the Server Manual Start You can start the server at any time either by clicking on the desktop shortcut TSDiag or by directly executing the corresponding server file from the installation directory Automatic Start The auto loader is started each time you start the system On the one hand this en sures that the desktop shortcut used for manual starting is available On the other the system checks whether the automatic startup of the server is activated in the set tings 4 2 The Main Dialog There are two possibilities to display the dialog for the server settings FTP transfer and run a batch file Start from the system tray icon with active system tray To access the server settings yo
14. e safety con cepts of automation technology 1 2 S SUTRON General Description 2 General Description TSDiag is a tool that allows you to access each Sutron operating device using the Microsoft CE or a computer using the Windows XP operating system via the network Each combination consisting of operating system and client server is possible The user can view the content of the display and interact with the software running on the device regardless of the software manufacturer In this case you can perform the same actions that you can when operating the touch screen directly You can also use the keyboard of the accessing device a PC or another operating device to enter data without the need for an alternative routing via the input panel of the de vice that you are accessing Additional functional enhancement is provided by the option that allows you to trans fer files to any folder in the device that can be written to As a result you can use TSDiag to transfer updated project files or drivers from one computer to multiple operating devices or to check the current status of the applica tion currently running 2 1 General Operating Conditions The software is executable on devices with Windows CE 5 0 and 6 0 operating sys tem The client is also available for PCs using the x86 architecture The TSDiag server supports a color depth of 8 and 16 bit If necessary reduce the color depth of the operating device or
15. emain unchanged To delete a previously saved value mark the Default Value check box You can also save a default user name that is automatically entered into the user name field in the Password Request dialog If the connection to the server breaks off the client tries to connect till the period of the connection timeout has passed 5 2 2 View The option always on top causes the main client window is permanently displayed above all other applications and therefore always remains visible If the option is en abled the status of the main window can not be altered by a server script The zoom factor allows you to enlarge the display of the screen contents of smaller operating devices or reduce the size of screen contents from large devices The possible zoom factors are 0 5x 0 75x 1x 2X 3x and Auto Screen content is automatically scaled to the size of the main window The size of the window is adjusted automatically when you change the setting The main screen displays a small window that indicates whether you can screen contents green or can not screen contents red currently transmit control com mande to the server As soon as several clients have logged on to the server but operation can only be carried out from one location only one user at a time will receive the enable signal If the client that is currently enabled does not execute an operation for a longer period of time approx
16. etwork port 1661 Interval for screen nm transmission pue unt Figure 4 4 General Settings dialog Activation of Password Protection To activate the password protection mark this check box For security reasons con trol commands from the client will not be accepted if the password protection is de activated You can then only view the screen of the operating device However you should always activate password protection to prevent unauthorized access Activation of Auto Start If you activate this option the auto loader automatically starts the server when the system is started Activation of Auto Exit This option enables the server to be stopped automatically in order to save resources after it has run for a specific length of time without an existing connection Users that are currently active in the Settings dialog are also counted as existing connections This prevents the software from being shut down during administration Idle Time min Here you can enter a time in minutes after which the server shuts down itself The input field is only active if the Auto Close option is activated Network Port Enter the communication port which should be used to set up the connection In case of a firewall in the network you have to set this port free for communication The port number entered in this dialog must also be set as the destination address for the client For file transmission the next higher port
17. is used thus this port has to be set free in the firewall too Due to this the highest possible port number is 65534 Interval for Screen Transmission Here you enter the minimum time in milliseconds that the server must wait between two screen transmissions If you set the value too high this can lead to long screen build up times while a value that is too low can place an excessive load on the pro 4 4 S SUTRON Server Functions cessor in the device which may also have an effect on other applications The lowest possible value is 50 ms however the default value of 100 ms is perfectly adequate to ensure smooth operation 4 2 3 3 User Management The User Management function allows you to create and delete users or adjust the settings and passwords User names and passwords are subject to the following restrictions User names maximum of 15 characters Passwords maximum of 30 characters The user name is case insensitive since TSDiag version 1 4 Therefore the as sumption of a user file Users dat from a previous TSDiag release is not recom mended However the password is case sensitive User management F3 Change password Change user Figure 4 5 Mam menu of User Management ali Change Password Opens a dialog that allows you to change the passwords for all the users created on the device Since only administrators are supposed to be able to access this area the system d
18. oes not issue a query for the old password To change a password you only have to select a user and enter the new password twice For security reasons a password must contain a minimum of six characters Set up User To set up a new user you only have to specify a user name that has not already been used and then enter the desired password twice To ensure that the new user is is sued with an operating authorization you must also activate the relevant option in the dialog After you click on the Set up button the system checks the data and saves the user Delete User In this dialog you can select and then permanently delete a user from a list of all ex isting users The Admin user is not listed here because the Admin user is required to operate the server Change User If you subsequently want to issue or withdraw operating authorization to or from a user you can select the desired user from a drop down list in this dialog The dialog is automatically filled in accordance with the current settings when you change your selection If you mark the check box or remove the check mark the user selection is 4 5 S S TRON Server Functions deactivated until you save or reject the change Choose either the OK or Cancel but ton to exit the dialog where OK will save the last unsaved change and Cancel rejects it 4 2 3 4 Log File Settings In the dialog that opens after you activate this button you can adjust the setting
19. ore the application is shut down it transmits some commands to the server to enable the server to detect the termination of the connection more quickly If the connection is canceled from the server or is interrupted as a result of a con nection termination an error message is issued and the application is then closed S suTRON s Client Functions S SUTRON A Index A M Activation of auto exit 4 4 Main Ce eee 4 1 Activation of auto start 4 4 Main screen client 5 2 Activation of password protection 4 4 N C Network port ege kA hee edegeh ira 4 4 Canceling a connection 5 5 Change password P MS DIAG EE 4 5 Password request u eee 5 2 Connection Q Setting UP DEE 5 1 Quit Te ornare narrer et ns 5 4 D Destination Computer 5 1 R Restart operating device 5 4 E Restart TSVISRT A 5 4 EE 2er anna ee 4 2 e F Safety le 1 1 File transier ssresissnennennsemnndethnse 5 4 Screen transmission Internal 4 4 Security prompt 4 3 G SetUpP USE aieiaieo naiean anupat iadaa 4 5 General conditions 2 1 Setting up a connection SON Oiii entre nr ans 4 7 H DOINGS LR air eege rene EES 4 3 mie geen 4 2 General 4 4 Starting the server 4 1 Starting the server automatically 4 1 ldl Ur NEE 4 4 Starting the server manually BEE 4 1 Important notes 1 1 SYMBO S gett he en eta ni e deeEdes
20. s and operations that refer to the log file for the server Log file settings View log file Set storage location Maximum number of entries max 500 100 Figure 4 6 Log File Settings dialog The individual functions are View Logging File You can use this button to open a window that displays the content of the log file You can not edit the content Depending on the size of the file it may take several sec onds to open Content of the logging file Eintrag vorn 24 01 2006 15 45 02 Uhr Der Administrator hat den Dialog Allgemeir Eintrag vom 24 01 2006 15 42 36 Uhr Der Administrator hat den Dialog Allgemeir Figure 4 7 Window for displaying the log file Set Storage Location After the installation the log file is first stored in the installation folder To change this you can specify a different directory in this dialog After you confirm with OK the sys tem first checks whether files can be created in the specified folder If so the content of the old log file is copied to the new location to prevent any data from being lost If you want to save the log file to another computer in the network you must ensure that a folder exists and that it is released on this computer You can access it from the command prompt To do this use the following command net use Networkpath_to_directory virtual_name 4 6 S SUTRON Server Functions The content of the directory then occurs at net
21. stem tray may not be visible You activate the desktop and system tray as follows 1 Create the file Admin ini or extend an existing Admin ini in the root directory of your USB stick 2 Edit the file Admin ini with your favorite editor for example Notepad and add the following content Explorer On Mode Development 3 Save the file 4 Plug the USB stick into the operating device 5 Restart the operating device and press the button Admin during the startup phase 6 Confirm the start of the administration the confirmation dialogs of the selected options and the end of the administration with the OK button 7 Restart the operating device In this dialog you can modify the server settings stop the server or disconnect an ex isting connection The individual functions are described in more detail below TSDiag Server S SUTRON Ba Settings Figure 4 1 The main dialog for the server 4 2 1 Exit You can use this button to shut down the server completely Any existing connection will be disconnected and the remote user receives an error message You can restart the server at any time 4 2 2 Hide While the main dialog is displayed you can see an entry in the task bar and a S tron icon in the system tray You can use the Hide button to close the dialog and the entry in the task bar disappears Only the icon in the system tray which allows you to re store the dialog is retained 4 2 S SUTRON
22. system to the ftp root directory 3 Download an existing file starter bat from the root directory on your local file system or create a new file with this name The file starter bat in the root directory is executed each time the operating device starts 4 Edit the file starter bat with your favorite editor for example Notepad and add the following content FlashDrv install TSDiag inst manager exe install or StorageCard install TSDiag inst_manager exe install With the appropriate paths different memory areas of the operating device can be accessed Some paths are dependent on the product line of the operating device USB stick HardDisk Device memory Slim Line FlashDrv Device memory emPower Line StorageCard Device memory Pro Line FlashDrv or StorageCard internal memory card 3 2 S SUTRON Installation Interactive Installa tion Client Server After the installation 5 Save the file 6 Copy the file starter bat with the FTP program to the root directory of the oper ating device 7 Restart the operating device Now it is checked at every start of the operating device automatically whether the TSDiag server is installed If the server does not exist it is automatically installed Settings of user management will remain unchanged 1 Copy the contents of the directory for your system to the root directory of your USB stick 2 Create the file Admin ini or e
23. the necessary files are transferred to the operating device To operating de vices with resolution 160 x 80 pixels a special version of the interactive installation is available For all other operating devices use the standard version For transfer and installation on the operating device there are two possibilities FTP transfer of the installation files and install TSDiag server automatically dur ing startup of the operating device Interactive installation with a USB stick and install TSDiag server and client op tionally To update an older version of TSDiag use the interactive installation Because an ex isting TSDiag version in the destination directory is not overwritten with the automatic installation The TSDiag program versions for different target systems are in different directo ries Directory Target system resolution Lan guage AODECA TSDIAGGER xxxx Slim Line gt 160 x 80 pixels german AODECA TSDIAGENG xxxx Slim Line gt 160 x 80 pixels english AODECX TSDIAGGER xxxx emPower Line german AODECX TSDIAGENG xxxx emPower Line english AODECA TSDIAGMINIGER xxxx Slim Line 160 x 80 pixels german AODECA TSDIAGMINIENG xxxx Slim Line 160 x 80 pixels english AO6ECZ TSDIAGGER xxxx Pro Line german AO6ECZ TSDIAGENG xxxx Pro Line english 1 Open your FTP program or the Windows Explorer and enter the ip address of the operating device example ftp 149 208 160 232 2 Copy the contents of the directory for your
24. to transfer the screen contents If the user name and or the password entered is incorrect the server sends an error identifier to the clients The server issues an error message and then stops 5 2 The Main Screen The primary function of the main screen is to display the screen contents of the op erating device S TSDiag WindowsCE topical FEER IU a EJintig launch Recycle Bin TSDiag Server TSDiag Client 5 LEJ 7 04 am Figure 5 3 The main screen on the client PC version 5 2 S SUTRON Client Functions Settings Always on top Zoom Operation release In the version for the operating devices the main screen contains scrollbars so that devices with a relatively high resolution can also be controlled from small operating devices Since the PCs generally have a higher resolution than the operating devices the scrollbars were omitted from the PC variant of the client The size of the main screen adjusts to the resolution of the device to be controlled taking the zoom factor into account In the operating device clients the maximum size of the main screen is 80 of the display size 5 2 1 File This dialog allows you to save a range of client settings These include the zoom fac tor after the software starts the size and position of the main screen as well as the status of the operation release window Only those values whose check boxes are marked are saved All other values r
25. u transfer a batch file via FTP to the operating de vice Start with batch file 1 Open your FTP program or the Windows Explorer and enter the ip address of the operating device example ftp 149 208 160 232 2 Download an existing file starter bat from the root directory on your local file system or create a new file with this name 3 Edit the file project bat with your favorite editor for example Notepad and add the following content FlashDrv install TSDiag inst_manager exe config or StorageCard install TSDiag inst_manager exe config With the appropriate paths different memory areas of the operating device can be accessed Some paths are dependent on the product line of the operating device USB stick HardDisk Device memory Slim Line FlashDrv Device memory emPower Line StorageCard Device memory Pro Line FlashDrv or StorageCard internal memory card 4 Save the file 5 Copy the file project bat with the FTP program to the root directory of the oper ating device 6 Restart the operating device and press the Press For Setup Main Menu button during the startup phase 7 Press the Start Batchfile button 4 1 S SUTRON Server Functions Start from the system tray Alternatively are the main dialog also appears when you click on the S tron icon in the system tray to the left of the clock Depending on the configuration of the operating device the desktop and the sy
26. work virtual_name in the folder structure of the operating device You can then specify this name as a path for the log file After a reboot the shares no longer exist and need to be recreated To set up the shares on start up of the operating device automatically you can add the appropriate command to the file Starter bat For example net use Networkpath to directory virtual name USER Server User Maximum Number of Entries Here you can set the maximum number of log entries to be stored in the file The number of entries that you should specify depends on the remote access freguency the change to the settings as well as on the amount of memory available for the file The log file logs actions in conjunction with the server These actions are Starting the program Exiting the program Successful login with user name and IP address Unsuccessful login with user name and IP address Logins prevented from the operating device Logging out Disconnecting the connection from the operating device Accessing the Settings dialog Unsuccessful attempt to access the Settings dialog Exiting the Settings dialog Creating a new user Deleting a user Changing the user authorizations Password changes for the users Changing the storage location of the log file 4 3 Setting up a Connection Provided that the server is running on the device you can also set up a connection
27. xtend an existing Admin ini in the root directory of your USB stick 3 Edit the file Admin ini with your favorite editor for example Notepad and add the following content Start HardDisk install TSDiag _Installer_CE exe 4 Save the file 5 Plug the USB stick into the operating device 6 Start the operating device again and press the button Admin during the startup phase 7 Confirm the start of the administration with the OK button The installation dialog TSDiag opens When activated the explorer the installation dialog may open in the background If this were the case first confirm any further di alogs with the OK button and close the launcher with Exit and OK Now the installa tion dialog of TSDiag should be visible 8 Press the Next button at the installation dialog 9 Accept the license agreement by selecting the checkbox and press the Next but ton In the component selection dialog you can Install the TSDiag client provides access to other operating units with installed TSDiag server Install TSDiag server allows users to access this operating device with the TS Diag client Install TSDiag client and server allows operation as a client and server 10 Select the options you want and press the Next button Depending on the system you can select the target directory for installation from an additional dialog 11 Select the target directory you want and press the Next button
Download Pdf Manuals
Related Search