User Manual
Contents
1. Full Contact Trainings System User Manual To use your AIR Body properly the following steps should be considered These steps will be explained through the following pictures Unpacking Filling your AIR Body with water when used without the metal base Screwing in the bolt Inflating your AIR Body Using the metal base Safe and Swing oe es oS a Deflating your AIR Body and folding it in a space saving manner 1 Unpacking Unfold your AIR Body and spread it flat out on the ground If you would like to use your AIR Body without the metal base you can fill the AIR Body with water through the red opening at the bottom This can only be done BEFORE you inflate your AIR Body with air AIRBODY Full Contact Trainings System 2 Filling your AIR Body with water when used without the metal base Open the valve at the bottom Insert the water hose Fill with water Close the valve Full Contact Trainings System 3 Inflating your AIR Body X lt A Open the big red valve on the side not the water one at the bottom Put the compressor on the opening and turn it on Inflate the AIR Body Your AIR Body is filled optimally if he is not too bulging This will help to achieve a more realistic rebound effect of the soccer balls With the small white valve see the two pictures at the bottom you are able to readjust the inflation of your AIR Body on the go with your mouth AIRBODY Ful2. l Contact Trainings System 4 Screwing in the bolt 7 The bolt has to be screwed in all the way to avoid damages to the thread AIRBODY Full Contact Trainings System 5 Using the metal base Safe and Swing P TE EA 4 r ki Pa ww AK GS TOER mee ye We y a j 4 B i Li f 7 The AIR Body Safe amp Swing can be used on both sides Position safe flat side on the ground for a better stability Position swing round side on the ground this allows pendular movements of your AIR Body fodi T WTO S ay ast RD f i PAY FEN hy eae NPA GES a ie it Y DEE UNE ae Your AIR Body will be pushed in the metal base via the screwed in bolt Ready to train Please note When using your AIR Body with water do NOT use the bolt Full Contact Trainings System 6 Deflating your AIR Body and folding it in a space saving manner Put your AIR Body on the ground and open the red valve on the side Starting from the head fold your AIR Body as shown in the pictures above AIRBODY Full Contact Trainings System Safety Instructions The AIR Body is made out of a special resilient high performance material optimized for use in training conditions with temperatures from 20 to 80 degrees Celsius this does not apply when the AIR Body is used with water Changing the surface of the AIR Body through glueing printing or sticking things on it etc can harm the special su
3. rface structure of your AIR Body The AIR Body being in contact with sharp spiky and hot objects can lead to damages of the AIR Body Before erecting the AIR Body make sure to check that there is no soiling at the bottom lower section of the AIR Body Do not put too much pointed pressure on a deflated AIR Body e g stepping on it while it is on the floor as this can lead to damage of the materials through stones etc The AIR Body must not be used as a swimming aid Do not sit on the AIR Body For a warranty the advice in this instruction manual has to be observed Disregarding these warnings may lead to personal injury or material damage If this advice is disregarded the manufacturer will not be liable for damages that might occur To avoid installation errors and damage to the AIR Body it is imperative that the installation instructions are followed The product must only be operated after reading installation and operating instructions How to clean your AIR Body Your AIR Body is easily cleaned Just use lukewarm water with a drop of conventional detergent and a sponge Please do NOT use any abrasive cleaners
Download Pdf Manuals
Related Search