Voice Activated Camera Positioning - User Guide
Contents
1. Voice Activated Camera Positioning User Guide Through voice activation and the use of two or three microphones the camera will automatically view the speaker Unique within the industry is the ability to accommodate more than one participant speaking at the same time by combining camera presets In this case the camera automatically pans out delivering a group view This improves conversation flow as participants do not have to make camera adjustments during the videoconference JUSgONVL The Voice Activated Camera Positioning has three modes SLOW The system waits a while before zooming in on a single person speaking Suitable when wide angle images are preferred over close up images NORM Should be used in regular meetings FAST The system quickly zooms in on a single person speaking Suitable when close ups are preferred over wide angle images Setup Before using the voice activated camera positioning you need to install additional microphones and then set up a preset for each of them Program the presets by pointing the MainCam towards the position where microphone 1 is and store that position in preset 7 Do the same for microphone 2 and store that position in preset 8 If you have a Vision 5000 and are using 3 microphones then you must also point the MainCam towards the position where microphone 3 is and store that position in preset 9 How camera tracking is working Voice Activated Camera Positioning can be a2. ctivated by starting camera tracking via the video source menu When camera tracking is activated the MainCam will automatically view preset 7 if the speaker is sitting closest to microphone 1 If the speaker is sitting closest to microphone 2 then the MainCam will automatically view preset 8 If both speakers are speaking at the same time or one after the other then the MainCam will view both presets The mode Fast Norm or Slow will determine how long the MainCam will stay in group view preset 7 and 8 before viewing preset 7 or 8 again Voice Activated Camera Positioning is deactivated when 1 Manually moving MainCam 2 Activating MainCam presets when MainCam is active 3 Disconnecting a call However when selecting a different video source e g document camera automatic camera tracking is temporarily suspended until MainCam is activated If you need further information please refer to your system User Manual D11765 Rev 03
Download Pdf Manuals
Related Search