Fly Air SET-UP USER GUidE
Contents
1. No Screwdriver is required F eg ee To deflate the Fanatic Fly Air unscrew the valve cover To release the valve push it downwards and twist to the left or right see picture Roll up the board starting from the nose so the fins are on the outside STORAGE The Fly Air can be stored inflated Direct sunlight over longer periods can cause fading On hot days the Fly Air will be harder as the air expands When not using for longer periods store the Fly Air lightly coiled or ideally unrolled FANATIC FLY AIR USER GUIDE ALL DATA SUBJECT TO CHANGE FANATIC 2013 WWW FANATIC SUP COM Grama2. FLY AIR Sel UP USER GUIDE A guide for all Fanatic Fly Air inflatables This step by step guide makes sure that you set up the Fly Air correctly for maximum enjoyment on the water Roll out your board on a flat surface grass is ideal Delivery Status paR oT i a am 7 wl Y ene t ae Make sure that the valve on the Fanatic Fly Air is in the outer position The valve must be released for inflation To release the valve push lightly downwards and twist to the left or right see picture The valve is now in the upper position Screw the pump hose and pressure gauge onto the pump handle The oressure gauge is on the upper side of the pump and the air hose on the side Connect the air hose with a twist to the pump and on the valve of the Fanatic Fly Air FANATIC FLY AIR USER GUIDE QlANMATIL 4 Make sure your feet are firmly placed on the foot rests of the pump and that you push directly down over the pump shaft You will find that you reach 10psi in about 3 minutes and a little more effort will get you to 12 14psi 1 bar The harder the board the better it performs We recommend using the board at a pressure between 12 22psi Fly Air Stringer models recommended air pressure is 14 5psi Premium models 22psi Insert the screw into the fin tab Be sure the fin box is clean and free of debris Insert the fin into the box opening and push it flush with the fin box Tighten up the fin screw
Download Pdf Manuals
Related Search