USER GUIDE
Contents
1. Login Default Password Menu Options None Not applicable No Download password required System Status Basic User basic Download System Status Conference Control Admin User admin Download System Status Conference Control Admin Menu Note If the default password listed above does not work contact your IT administrator LiteShow English v Login None v Password Login WebSlides View Projecting Screen Copyright 2014 InFocus Corporation All rights reserved 33 Download Available to all users regardless of which login is used LiteShow gt Download 4 Logout Download System Status You can download Utility for Windows from here Download XP Vista Windows 7 8 Please click on the following link Lite Show4 support to find the following applications VAC exe Virtual Audio Cable for audio projection VDD exe Virtual Desktop Display for extended screen on Windows 2000 XP Vista PtG Converter exe Presentation to Go for Power Point conversion Note to Internet Explorer 8 users SmartScreen Filter may prevent proper download Please ensure SmartScreen Filter is disabled before you attempt to Download lt Safety gt SmartScreen Filter gt Turn Off SmartScreen Filter gt You can download Utility for MAC from here Download MacBook 10 7 10 9 1 From the Download window select the appropriate client software that corresponds to your operating system and click D2. Reboot System Note Logout 8 Manual Refresh 40 recommended maximum concurrent users 10 e 2D recommended maximum concurrent users 15 J 3D recommended maximum concurrent users 20 O 45 recommended maximum concurrent users 25 A 6D recommended maximum concurrent users 30 390 recommended maximum concurrent users 35 8 Disable O Use the same password as Code O Use the following Code 0 5 If there are more than 10 users logged into LiteShow it is recommended to connect LiteShow to company network through Ethernet or bridge LiteShow to a router due to wireless bandwidth concern User should connect LiteShow via company network or router in order to secure the projection performance Copyright amp 2014 InFocus Corporation All rights reserved Cave Cancel 45 Reboot Restarts the LiteShow system LiteShow gt Admin gt Reboot System Logout Device Setup Network Setup OSD Setup A Reboot System Change Passwords This will reboot the device immediately Reset to Default Firmware Upgrade WebSlides Setup Reboot System Copyright 2014 InFocus Corporation All rights reserved Logout Exits the LiteShow web page LiteShow gt System Status Download System Status Conference Control Firmware Version 1 0 0 3 Admin IP Address 192 168 100 10 Subnet Mask 255 255 255 0 Default Gateway 192 168 100 10 Wireless MAC Address 00 12 5F DB 1F 52
3. USER GUIDE LIT ESHOW4 Declaration of Conformity Manufacturer InFocus Corporation 13190 SW 68 Parkway Suite 200 Tigard OR 97223 8368 We declare under our sole responsibility that the LiteShow wireless adapter conforms to the following directives and norms CEO European Union CE Standard EN 300 328 EN 62311 EN 55022 CLASS BEN 55024 EN 301 489 17 EN 301 489 1 EN 61000 3 2 EN 61000 3 3 EN 61000 4 2 EN 61000 4 3 EN 61000 4 4 EN 61000 4 5 EN 61000 4 6 EN 61000 4 8 EN 61000 4 11 EN 60950 1 1ICE 60950 1 HS FCC ID RYK WMIR269GN U S A FCC Standard FCC 47 CFR Pact 15 Subpart C ANSI C63 4 2003 FCC 47 CFR Part 15 Subpart B Class B ANSI C63 4 2003 ICES 003 IC 8150A WMIR269GN Canada IC Standard IC RSS 210 1CES 003 Issue 4 N10533 Australia C Tick Standard AS NZS 4268 CISPR 22 Class B IEC 60950 1 NOM NYCE COFETEL ID RCPINAA10 0931 Mexico NOM amp COFETEL Standard NOM 001 SCFI 1993 NOM 121 SCT1 2008 The Agency Regulatory Approval for the computer s wireless adapter is solely the responsibility of the adapter manufacturer not InFocus Corporation Trademarks InFocus In Focus INFOCUS stylized Liteshow and associated INFOCUS logos and designs are either trademarks or registered trademarks of InFocus Corporation in the United States and other countries Apple and Macintosh are trademarks or registered trademarks of Apple Computer Inc Microsoft and Windows are tra
4. LitesShow 4 module e LiteShow USB token e Power Adapter DC 5V 2 5A e Antenna 2 e Mounting Hardware e Quick Installation Guide with Warranty Card e Quick Installation Guide for mobile applications Initial Setup 1 Connect power to Liteshow module and connect a VGA cable from the projector to the LiteShow VGA connector If desired audio can also be connected to the Liteshow Audio connector 2 Turn on the projector and LiteShow module Note When the projector shows the instructions below LiteShow is ready for use 2 LiteShow 3 Verify that your computer s wireless connection is enabled and connect to the LiteShow wireless network 4 Open your browser Although the LiteShow page should display automatically you can bring up the LiteShow page by entering the IP address displayed on the projector into your web browser Note The default IP address of LiteShow is 192 168 100 10 5 At the LiteShow login screen enter one of the following combinations to access the downloadable client software Login Default Password None Not applicable No password required Basic User basic Note If the default password listed above does not work contact your IT administrator 6 Select the client software that corresponds to your operating system and click Download to start the installation program 7 Follow the Installation Wizard instructions Note If a Windows Security Alert window displays click Unblock to
5. Note Webslides is not available when QuadView is in use 1 Presenter Make sure your PC Mac is connected to LiteShow4 and click Launch WebSlides 2 Audience a Connect to the LiteShow4 WiFi Network shown on the projector b Launch your web browser and enter the LiteShow4 IP address LiteShow English v Login None v Password Login WebSlides View Projecting Screen Copyright 2014 InFocus Corporation All rights reserved c Click the WebSlides button 3 Start to receive the presenter s slides The below image can be seen on the audience s browser A i Bee c NebSlides 29 4 Use the toolbar to pause save change the aspect ratio expand and refresh the presentation window Notes e WebSlides users and users logged into Liteshow4 both consume wireless bandwidth If more thatn 10 users are logged into LiteShow4 we recommend connecting Liteshow4 to the company network using Ethernet or a router to ensure best performance e We also recommend that Webslides users do not exceed the recommended number specified on the Web Management page e Wireless Projection tunction and Conference Control function can support up to 64 users Select Projection Desktop Allows you to project the main screen or the extended screen Notes e Only Mac 10 7 and above are supported e louse the extended screen install the SVS extended screen driver from the USB token Projection Ouality Allows you to togg
6. Wire MAC Address 00 12512 37 89 Projecting Status Waiting for Projecting Total Users 0 Code 2414 Copyright amp 2014 InFocus Corporation All rights reserved 46 Start WebSlides Click the WebSlides button to start the WebSlides feature See the Launch WebSlides section for more Information LiteShow English T Login None T Password Login WebSlides View Projecting Screen Copyright amp 2014 InFocus Corporation All rights reserved 47 Appendix A Using PtG Converter 1 Download the PtG Converter application from the Liteshow USB token or from the InFocus website at www infocus com support 2 Once installed the converter will reside in the MobiShowMobiShow PtG Converter folder within Programs 3 Launch the PtG Converter and the following control panel will display Convert Play aa Preview Open 5 Click Convert to select and start conversion of the desired PowerPoint presentation PtG Converter will convert the PowerPoint file to a PtG format Note Before clicking Convert turn off all extended monitors Only the primary monitor should be active to ensure proper PtG conversion 6 After successfully converting the file you can use any of the following controls a Preview expands and collapses the preview pane b Play plays the selected PtG file c Open allows another PtG file to be opened 48 Appendix B Liteshow Port Map Liteshow uses the following ports for network
7. local Industry Canada office Agency Approvals FCC CE IC C Tick NOM COFETEL Other specific Country Approvals may apply see please product certification label InFocus reserves the right to alter product offerings and specifications at any time without notice Table of Contents ONERVMIE Va 8 E US KT S o a E lt lt 8 RAT S DOK AE o o E 8 INIA SETUP arar a acia 9 WINDOWS CLIENT OT Peseta taaan 11 Emite eo A A eE E O OOO o eo FA 11 eo eo o AG eea nn e e isa OO E OO A e Oe 8 ne E 12 m 05 colonies A A e o o OE A 12 MOSS AD iso ete boo ado E N ocacion 13 MENTE FUNC COIS arrastrada dolia tocando 14 SNOW e o E QA 14 O e a caret encores aa PAISTA HTA o ges hep tem erase mae asncs E eee eames E E E 14 cien A nm ee ee PE A 14 Egeo A ra Pol UI en HITAAT SHONEN S ONEN E I E ON Esi 15 EEE VSS SIIS PAI Po UU APP o tasaaseateeenbi E sun Ss n 16 sie 9 io seo BIS 100 decree tas ct e O e e O oo O 18 ES ISO AO DES o IEI E In A A 19 sele es AAA e ge o A E E ee eer 19 ao A A A 19 Projection Aspect Ratio rca 20 Enable WBE U B PP e ded Hore 0 ERA 20 ES e o O UI Aa e O oO E srmmit isariuSastussot 20 e AAA a er OE a e o metrist 21 Auto Power oo E II kodan mok j n j eor as ava et je 21 AO ION abro coiaaiess 21 Make USB PS ORO obte idiota 22 CORY FOpiIC ation 10 DOSKO censi AO E E O E EE EE 22 EDE o E e E AE KI KOH E NE ca ale A E TE K A E E A E TEI PUHTA 22 o A E E E E E A oi Mo oo O sida Nt 23 E E E
8. traffic It may be necessary for the network administrator to configure the network to pass broadcast packets on ports 1047 1048 and 1049 to enable the LiteShow application to correctly discover LiteShow modules on a complex network Socket Direction Usage Port Command 3268 3 389 389 S Client gt Device 3080 Data Device gt Client 1041 Bi directional Device l Broadcast Discovery 1049 49 Appendix C Configuring LiteShow for Specific Environments Profiles and Menu Options allow the user administrator to customize Liteshow startup behavior for particular situations Here are some examples PC always connects to the same display Create and save a profile for the display Turn on Auto Profile Connect Turn off Auto WiFi Connect if you will access the display over your normal network connection Use Auto Change PC Resolution to set a default action and avoid repetitive startup prompts PC connect to a limited number of displays Create and save a profile for each display use a descriptive name for each profile Turn off Auto WiFi Connect if you will access the display over your normal network connection Use Auto Change PC Resolution to set a default action and avoid repetitive startup prompts Running LiteShow on a PC where System Folders are locked down by IT Run LiteShow from the USB token From the LiteShow menu select Copy Application to Desktop Place the resulting LiteShow4 folder anywhere in your
9. Documents folder structure and put a link to the Liteshow4 exe program somewhere easy to find Then run LiteShow from that folder and configure it normally LiteShow will store and use configuration information in the startup folder when it is not installed in the System Program Files structure Locking a USB token to a specific Display When you run LiteShow from a USB token it will store and use configuration information in the startup folder on the USB token To create a token locked to a specific display run LiteShow from the token and follow the same steps as above for PC always connects to the same display Network connect configuration will be stored on the token and applied at startup Separate tokens can be configured for employees and guests to reflect appropriate connection strategies as defined by the administrator Rolling out Custom Configurations to Large Installs Rollout using a script which invokes LiteShow4 exe VERYSILENT to cause LiteShow to install without prompts and exit after install is complete Use the same script to distribute custom wps ini configuration and profile ini saved profiles into the lt User gt Appdata LiteShow4 folder Both ini files are simple text files Username in profile ini for example can be customized by the rollout script 50
10. PU A 23 MAC CLIENT UTILITY aras 24 ER ERNST PP ICI O re E E O oo o E O e E A 24 eo ecu A e A e O o o O II ee o 8 ESE E aja aad daa ee 25 FIOJECUON MOCE Taiana daneses 25 MOS MOS a AE 26 Ment FURCHON ars iron 21 SHOW FSCO WS INN do 21 O OR 21 SSA AEC ENVE DOV Oa a tc S S E E Runa hy k tess sa acces 27 LAG Ie de RAs a kait a a a a t ljatsai a mad 21 ENDS West une anieccaaidenyeniearegvdaaieetteatinandald Marae vaca savdadunabaad taudeiMebaculaa sco y sara a la edalaeaMial oa 29 SESE PIO ICC UO DSS KOP italia ia 30 FOSS ei AUN aa nectar et can A te as gh ele ac tah nde 30 RO ECU MIO a ai 30 Resolution Sed lO ee kd sheet dna 31 POISSA SNS UR AIO amet ttna ava ston A EAE e Slo olefins tetova o ates aa tog estt t Gu Sank Bae na 31 PAO MIRO ONNO ti maaosan Toisaa 31 Sena Audio TO DIS A AAA v 32 HOCK O teaa masaman otetta A A 32 RA 32 O RN 32 WEB MANAGEMENT csdccesescatenavebes uvsehaan TE EE vabusu wee inwt tiers v ki Tvtaka rahe STEAK Met N kistvvhs use beatae aeasauteuea k 33 ROME FAGO uira A Sat s panm r tt tnt 33 DOWMO arta td eso 34 SS OIS AIN POP ORO CO o O ECO keen uk r t eee ee eee ee eee eee 55 Conterenco CON Tolva nidos 36 AMI didas 37 BENET QUID PPP POUR m k sh m j tehs net E kat t tytsetee 37 NEWWOR SC si 38 Pocero atea dida aos 39 By adores S6IOrmmoevamus isa amma mate a Re ee ee ee arn ST oe ee eer 39 WICESS S SUP a A er eee ee ee eS 39 AE O ene 40 O
11. T E O 40 SNMP onn a E E es 40 OSV SEUD enia A O a a a A er er 41 Ohanga Pass Words a laa S A cis 42 RES DEAU ra N ene er errr er ee ee ree reer eee er reer eee re rere 43 PAI ALS WOON OS ats O itek je s kte m k st 44 WebsSIldes Seti A ias 45 FO ea A mud den att 46 EP Po e e o E eestaas 46 Start WebSIides oooococococococococo nos APRENDES A USING PIG CONV ER TER urraca IATA AIR NOIA APPENDIX B LITESHOW PORT MAP APPENDIX C CONFIGURING LITESHOW FOR SPECIFIC ENVIRONMENT S oocccccccnocconcnnnccconcnnncnnoncnoncnnnnnconcnnnnnnnnnnnns Overview With the revolutionary Plug and Show wireless projection QuadView and wireless projection via PDA Liteshow makes all of your presentations and meetings more efficient and successful Features e Compatible with Windows 8 Windows 7 Vista XP and Macintosh Mac version 10 5 and above e Plug and Show Just link your computer to LiteShow through WLAN or Ethernet plug the token into a USB port and in seconds your screen will be projected wirelessly to your projector e QuadView allows up to four computer or PDA screens to be projected on one projector at the same time e Web based conference control e Session security login wireless WEP WPA key and gatekeeper functions protect presentation contents and maintain office network security e Media playback feature supports music and video streaming Liteshow can even handle high definition video What s in the Box e
12. ality k Projection Mode d v Presentation Mode Resolution Setting k Video Mode Projection Aspect Ratio Resolution Setting Allows you to toggle between Never Change keeps the original desktop resolution Always Change automatically changes the resolution to match the application s recommended settings or Always ask me prompts the user to change Projection Mode b Resolution Setting b v Never change Projection Aspect Ratio Always change Enable IWB USB Bridge Always ask me 19 Projection Aspect Ratio Allows you toggle between Keep aspect ratio keep the original aspect ratio if the desktop resolution is different than the LiteShow4 resolution and Fit full screen adjusts the image to project full screen Projection Mode k Resolution Setting k Projection Aspect Ratio Keep aspect ratio Enable IWE USB Bridge 7 Fit full screen Enable IWB USB Bridge This feature enables touch functionaly between your LiteShow device and your touch computer display 1 Plug in a USB cable from the back port to your touch computer display 2 Click Enable USB IWB Bridge 3 When the full screen projection is displayed it will bridge the IWB device to your PC wirelessly Notes e The UoIP driver found on the USB token must be installed first before using this feature e he UoIP driver supports standard Win7 8 compatible HID touch devices e The front two USB ports do not support UolP feature Advanced Screen Capture Al
13. company network using Ethernet or a router to ensure best performance e We also recommend that Webslides users do not exceed the recommended number specified on the Web Management page e Wireless Projection tunction and Conference Control function can support up to 64 users Select Projection Desktop Allows you to project the main screen or the extended screen Notes e The VDD application found on the USB token must be installed on Windows XP computers before the Projection Desktop feature is used e Extended display is not supported on computers with Windows 7 and Vista Starter operating systems In addition extended display is not supported by all Windows 8 computers however if the computer can extend its display to an external monitor device then it should work with LiteShow4 Launch SidePad Launch WebSlides Select Projection Desktop k v Main Desktop Projection Ouality Extended Desktop Projection Mode k Resolution Setting k Projection Aspect Ratio k Projection Quality Allows you to toggle between Normal faster performance and lower image quality and Best better image quality and slower performance Select Projection Desktop b Projection Ouality v Normal Projection Mode k Best Resolution Setting b Projection Aspect Ratio k Projection Mode Allows you to toggle between Presentation mode shortest latency and Video mode better video performance Select Projection Desktop k Projection Ou
14. continue installation LiteShow gt Download m Logout Download System Status You can download Utility for Windows from here Download XP Vista Windows 7 8 Please click on the following link Lite Show4 support to find the following applications VAC exe Virtual Audio Cable for audio projection VDD exe Virtual Desktop Display for extended screen on Windows 2000 XP Vista PtG Converter exe Presentation to Go for Power Point conversion Note to Internet Explorer 8 users SmartScreen Filter may prevent proper download Please ensure SmartScreen Filter is disabled before you attempt to Download lt Safety gt SmartScreen Filter gt Turn Off SmartScreen Filter gt You can download Utility for MAC from here Download MacBook 10 7 10 9 8 Once installation is complete a LiteShow shortcut will appear on your Desktop 10 Windows Client Utility Launch Application After you successfully download the Liteshow Windows client follow the steps below to start the program a 2 gt N Lite Show Click the LiteShow shortcut Manager If the Liteshow module is found a Login Code dialog box displays on your projector Enter the Login Code visible on the projector and click OK Your computer screen should begin displaying automatically 5 Ifthe Login Code is not visible on the projector the Login Code has been disabled by your administrator Click OK to proceed 2 Select the network yo
15. demarks or registered trademarks of Microsoft Corporation Other trademarks mentioned herein are the property of their respective owners and are referenced for information only Any reference does not imply affiliation recommendation or endorsement by or between the respective trademark owners and Infocus Corporation NOTE This product is covered electrical and electronic equipment under the European Union s Waste from Electrical and Electronic Equipment WEEE Directive 2002 96 EC The WEEE Directive requires that covered equipment be collected and managed separately from typical household waste in all EU member states Please follow the guidance of your local environmental authority or ask the shop where you purchased the product for collection or recycling options FCC Warning Note This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This eguipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the eg
16. ds Projection Ouality Projection Mode Resolution Setting Projection Aspect Ratio Web Admin Opens the Web Management login page See the Web Management v Auto WiFi Connect section for more information v Send Audio to Display Hot Key Search Receiver Device About Disconnects the current receiver and searches for the receiver again Exit Launch SidePad SidePad is an application that allows users to connect iPads Smartphones Android and iOS PCs and displays projectors via the Liteshow 4 device The user can then control the projecting PC via the IPad Smartphone See the illustration below SidePad Receiver Client Receiver Projection 27 1 Download the software application For OS Download SidePad Receiver from the Apple Store For Android Download SidePad Receiver from the Google Play Store 2 Connect your iOS Android device to the LiteShow 4 device through WiFi and launch SidePad Receiver 3 Click Launch SidePad from the menu In a few seconds the PC desktop will display on the IOS Android device You can now control the PC from your OS Android device MirrorOp SidePad 4 If your device is not detected the SidePad Login window displays SidePad Login Device IP n 0 0 0 User Mame PCHOU 28 Enable WebSlides Webslides allows users to broadcast their presentation to up to 64 users simultaneously
17. egins displaying your computer screen to the connected projector LiteShow4_mac at v LiteShow3 Server List 192 168 168 107 LiteShow Y SEARCH FOR User Name user 5 Today Yesterday Past Week Login Code Gm All Images All Documents Connect Ouit 1 of 1 selected 8 3 MB available Application Control Panel Menu Min Max Projection Login Code Clos Mode Tab Status Indicator Video Mode Tab Projection Mode Tab Projection Mode Controls Full Screen projection Project to Quadrant 1 25 Video Mode Tab Start playing video music Stop playing video music supported formats include MPEG1 2 DivX 3 4 5 XviD MPEG4 H 264 WMV9 MP3 WMA Video Mode Notes For higher quality video or music playback stream the files from your computer to the LiteShow module Decompression buffering and video processing all take place in the LiteShow module reducing the load on your computer and network Click the Video Mode tab to switch to video mode Choose a video audio file to begin playback 26 Menu Functions Menu When you click the Menu button shown above this additional menu a Information e MIN window will appear Search Receiver Device Launch SidePad Show Receiver Information Enable WebSlides Displays the receiver information such as the WiFi name IP address Select Projection Deskton and code in the upper left corner of the desktop for 30 secon
18. es Set MB USB Port Se oe O Mouse Keyboard E Reboot System Copyright amp 2014 InFocus Corporation All rights reserved 37 Network Setup By default the Liteshow device is a DHCP client When the Liteshow module is connected to a LAN that already has a DHCP server present the LiteShow module takes an IP address assigned to it by the server When the LiteShow module is connected to a LAN that does not have a DHCP server the LiteShow module becomes the DHCP server in the network InFocus LiteShow gt Admin gt Network Setup Device Setup Network Setup IP Address OSD Setup Change Passwords Subnet Mask Reset to Default Default Gateway Firmware Upgrade WebSlides Setup DNS Server E Reboot System Start IP End IP Subnet Mask Default Gateway DNS Server Wireless LAN e Enable Disable SSID Broadcast Channel Encryption Key Channel Bandwidth Connect to Existing AP J Enable e Disable Encryption Key Copyright amp 2014 InFocus Corporation All rights reserved 8 Enable J Disable 4 Logout 192 1166 1100 110 255 255 1255 D 192 1168 1100 110 192 1166 1100 110 O o Embedded AP SSID NAME 8 Enable Disable Hide characters 20MHz 8 Auto Existing AP SSID Scan Disable K Hide characters 6 All Pass All Block J Internet Only 38 IP Setup You can select Obtain IP address automatically or U
19. ilable wireless networks and automatically switch to the selected network before searching for available LiteShow modules Selecting Skip when Auto WiFi is selected will not modify the computer s existing network connection When Auto WiFi Connect is disabled the LiteShow application will only search the computer s existing network connection for LiteShow modules 31 Send Audio to Display Bridges the audio to your display device and mutes the local speaker Audio is restored when the application closes Hot Key Displays a list of available Hot Keys Hot Key Full Screen Ctrl Shift F Split 1 Ctrl Shift 1 Split 2 Ctrl Shift 2 Split 3 Ctrl Shift 3 Split 4 Ctrl Shift 4 Stop Ctrl Shift 5 Pause Ctrl Shift P Menu Ctrl Shift M Magnify Ctrl Shift A K About Displays system information including the client version IP address and login code Exit Closes and exits the LiteShow application Projection stops immediately 32 Web Management Home Page 1 Ensure your computer has successfully connected to LiteShow 2 Open your web browser It should automatically open to the Liteshow home page If not enter the IP address shown on the projector screen in your browser window The default IP is 192 168 100 10 3 At the LiteShow login screen choose your desired language from the drop down and enter one of the following combinations to access associated LiteShow menus
20. ion and Gatekeeper Gatekeeper will be set to All Pass Disabling the Wireless Client will restore the RJ45 wired connection Existing AP SSID the SSID string of the corporate wireless LAN maximum length 32 bytes no spaces Encryption the encryption method required to access the corporate wireless LAN WEP WPA WPA2 64 bit or 128 bit in ASCII or HEX string Key the value required to access the corporate wireless LAN Used only when Encryption is enabled Gatekeeper Designed to ensure enterprise network security SNMP Allows 40 All Pass allows Guest Users connected through a wireless connection to access the office network LAN All Block prevents Guest Users connected through a wireless connection from accessing the office network LAN Internet Only prevents Guest Users from accessing the office network LAN but still allows internet traffic browser packets i e port 80 443 to pass through you to enable or disable SNMP services OSD Setup Allows you to customize the LiteShow standby image with a personal image and or restore the original standby image In addition you can control how the device information and screen saver is displayed InFocus LiteShow gt Admin gt OSD Setup Fs Logout Device Setup Network Setup Image Name Default OSD Setup Restore to default Change Passwords Reset to Default File Name Image File Upload The image file need to be JPG format and the maximu
21. le 4 Wait for at least 10 seconds and release the Reset button 5 Factory default settings should be restored 43 Firmware Upgrade Used for upgrading the LiteShow firmware and for importing and exporting configuration settings this is helpful when multiple Liteshow devices are being configured LiteShow gt Admin gt Firmware Upgrade Logout Device Setup RENE A Network Setup Export System configuration OSD Setup Change Passwords Reset to Default Firmware Upgrade WebSlides Setup Reboot System Copyright amp 2014 InFocus Corporation All rights reserved To update your LiteShow firmware 1 Connect the LiteShow device to your network RJ45 connector before updating Do not update wirelessly 2 Download the latest firmware image file awd from the InFocus support site www infocus com support to your computer 3 Choose Firmware Upgrade from the left hand menu 4 Click Browse and open the firmware image file you previously downloaded to your computer 5 Click Upgrade Note This process will take several minutes 6 After a message appears stating the update has been successful click OK and begin using LiteShow 44 WebSlides Setup Allows you to adjust the Auto Refresh Interval and Access Password Control InFocus LiteShow gt Admin gt WebSlides Setup Device Setup Network Setup OSD Setup Change Passwords Reset to Default Firmware Upgrade WebSlides Setup
22. le between Normal faster performance and lower image quality and Best better image guality and slower performance Select Projection Desktop p Norma Projection Mode b Best Resolution Setting b Projection Aspect Ratio p Projection Mode Allows you to toggle between Presentation mode shortest latency and Video mode better video performance Select Projection Desktop Projection Ouality Projection Mode Y Presentation Mode Resolution Setting Video Mode Projection Aspect Ratio gt 30 Resolution Setting Allows you to toggle between Never Change keeps the original desktop resolution Always Change automatically changes the resolution to match the applications recommended settings or Always ask me prompts the user to change Select Projection Desktop J Projection Ouality b Projection Mode gt Projection Aspect Ratio p Always change Z v Always ask me v Auto Wifi Connect Projection Aspect Ratio Allows you toggle between Keep aspect ratio keep the original aspect ratio if the desktop resolution is different than the LiteShow4 resolution and Fit full screen adjusts the image to project full screen Select Projection Desktop e Projection Quality E Projection Mode W Resolution Setting lo Projection Aspect Ratio W v Keep aspect ratio m Fit full screen w Auto WiFi Connect Auto WiFi Connect When Auto WiFi Connect is enabled the Liteshow application will search out and list all ava
23. lows the user to see the layered windows on the connected display Note The mouse cursor may blink from time to time when the PC screen is displayed in this mode Advanced Screen Capture disabled 20 Advanced Screen Capture enabled Send Audio to Display Bridges the audio to your display device and mutes the local speaker Audio is restored when the application closes Note For Windows XP only If you cannot hear the audio the VAC Setup application located on the USB token must be installed on your computer Auto Power Management al Fully charged 100 To optimize projection performance the LiteShow application will Select a power plan automatically turn the computer s Windows power management settings to Balanced High performance when the LiteShow Application is enabled I Pi saver Note When the LiteShow application is disabled the computer s power iS management settings are unchanged Learn how to conserve power More power options Windows Mobility Center Auto WiFi Connect When Auto WiFi Connect is enabled the LiteShow application will search out and list all available wireless networks and automatically switch to the selected network before searching for available LiteShow modules Selecting Skip when Auto WiFi is selected will not modify the computer s existing network connection When Auto WiFi Connect is disabled the LiteShow application will only search the computer s existing network con
24. m file size is 5MB Recommended image resolution 1024 768 Browse Firmware Upgrade WebSlides Setup Reboot System Device uusiin e Show All Hide All Overlay Device information Enable O Disable e Enable Disable Screen Saver settings idle Time Minutes Apply Cancel Copyright amp 2014 InFocus Corporation All rights reserved 41 Change Passwords Allows you to reset the passwords for Basic User and or Admin User InFocus LiteShow gt Admin gt Change Passwords i Logout Device Setup Network Setup OSD Setup Change Passwords Reset to Default Firmware Upgrade WebSlides Setup Reboot System Enter New Password Apply II Confimm New Password Enter New Password Apply I Confinm New Password Copyright amp 2014 InFocus Corporation All rights reserved 42 Reset to Default Restores LiteShow to factory default settings LiteShow gt Admin gt Reset to Default i Logout Device Setup Network Setup Terr Tesoro AN This will restore the device to the factory default settings Reset to Default Firmware Upgrade WebSlides Setup Reboot System Copyright amp 2014 InFocus Corporation All rights reserved Alternatively factory default settings can also be restored as follows 1 Turn off the LiteShow module 2 Pressandhold the Reset button on the bottom of the Liteshow module 3 Turn on the LiteShow modu
25. nection for LiteShow modules 21 Make USB PnS token Creates a duplicate USB LiteShow token You can insert a USB thumb drive and follow the Setup Wizard to make the token Users can execute the LiteShow application directly from the token avoiding the need for guests to install the application Copy Application to Desktop Copies the LiteShow application to your desktop Administrator rights on your computer are not required Hot Key Displays a list of available Hot Keys Full Screen Ctrl Shift F Split 1 Ctrl Shift 1 Split 2 Ctrl Shift 2 Split 3 Ctrl Shift 3 Ctrl Shift 4 Stop Ctrl Shit Pause Girl Shift P Menu Ctrl Shift M Magnify Ctrl Shift A 22 About About LiteShow3 v0 0 0 5 Displays system information including the client version IP Copyright c 2010 InFocus Corporation All rights reserved address and login code Server IP Address 192 168 168 75 Login Code 4014 Exit Closes and exits the LiteShow application Projection stops immediately 23 Mac Client Utility Launch Application 24 Click the LiteShow shortcut Select the network you want to project over and then the LiteShow module you wish to use If the Liteshow module is found a Login Code dialog box is displayed on your projector Enter the Login Code visible on the projector and click Connect LiteShow automatically b
26. ou click the Menu button shown above the menu window displayed on the right appears Click an option to enable disable a feature or open another submenu Show Receiver Information Displays the receiver information such as the WiFi name IP address and code in the upper left corner of the desktop for ten seconds Web Admin Opens the Web Management login page See the Web Management section for more information Search Receiver Device Disconnects the current receiver and searches for the receiver again Show Receiver Information Web Admin Search Receiver Device Launch SidePad Launch WebSlides Select Projection Desktop Projection Quality Projection Mode Resolution Setting Projection Aspect Ratio Enable WB USB Bridge Advanced Screen Capture Send Audio to Display Auto Power Management Auto WiFi Connect Make USB PnS Token Copy Application to Desktop Hot Key About Exit Launch SidePad SidePad is an application that allows users to connect iPads Smartphones Android and iOS PCs and displays projectors via the Liteshow 4 device The user can then control the projecting PC via the IPad Smartphone See the illustration below SidePad Receiver Client n o D E Projection 1 Download the software application For OS Download SidePad Receiver from the Apple Store For Android Download SidePad Receiver from the Google Play Store 2 Connect your OS Android device to the LiteShow 4 device
27. ownload to start the installation program 2 Follow the Installation Wizard instructions Note If a Windows Security Alert window displays click Unblock to continue installation 3 Once installation is complete a LiteShow shortcut will appear on your desktop Note to System Administrators If you save the LiteShow4 exe installation file to an accessible folder you can invoke it in a script as LiteShow4 exe VERYSILENT This causes LiteShow to install without prompts and silently terminate without launching LiteShow at the end of the installation process 34 System Status Avallable to all users regardless of which login is used This page displays a variety of network related information including the IP address of Liteshow whether it is currently projecting and how many users are currently connected to the device LiteShow gt System Status Logout Download vesan Conference Control Firmware Version 1 0 0 3 Admin RA IP Address 192 165 100 10 Subnet Mask 255 255 255 0 Default Gateway 192 168 100 10 Wireless MAC Address 00 12 5F DB 1F 52 Wire MAC Address 00 12 5F 12 37 89 Connection status Projecting Status Waiting for Projecting Total Users 0 Code 2414 Copyright amp 2014 InFocus Corporation All rights reserved 35 Conference Control Available only to users logged in as either Basic or Admin Users Conference Control allows you to easily change presenters and to display up to four presenta
28. pment and your body Proper operation of this radio according to the instructions found in this user s guide will result in user exposure that is substantially below the FCC recommended limits e Donottouch or move antenna while the unit is transmitting or receiving e Donothold any component containing the radio such that the antenna is very close or touching any exposed parts of the body especially the face or eyes while transmitting e Donot operate a portable transmitter near unshielded blasting caps or in an explosive environment unless it is a type especially qualified for such use e Do not operate the radio or attempt to transmit data unless the antenna is connected if not the radio may be damaged Canada This Class B digital apparatus complies with Canadian ICES 003 Cet appareil num rique de la classe B est conforme a la norme NMB 003 du Canada This device complies with Class B Limits of Industry Canada Operation is subject to the following conditions 1 This device may not cause harmful interference and 2 This device must accept any interference received including interference that may cause undesired operation The device is certified to the requirements of RSS 139 1 and RSS 210 for 2 4 GHz spread spectrum devices The use of this device in a system operating either partially or completely outdoors may require the user to obtain a license for the system according to the Canadian regulations For further information contact your
29. se the following IP address IP Address The default value is 192 168 100 10 Subnet Mask The default value is 255 255 255 0 Default Gateway The default value is 192 168 100 10 DNS Server Enter the values for your network DHCP Server Setup Enable or disable the DHCP server automatically or disable it altogether Start IP The start IP address of DHCP Server End IP The end IP address of DHCP Server Subnet Mask Enter the values for your network Default Gateway Enter the values for your network DNS Server Enter the values for your network Wireless Setup 39 Wireless LAN Enable or Disable the Wireless LAN Embedded AP SSID Name Type the device name SSID Broadcast SSID string maximum length is 32 bytes No spaces Channel You can set fixed channel or choose Auto After powering on the LiteShow choosing Auto will scan all wireless channels and select one clear channel automatically Encryption Disable or select a wireless encryption preference WEP WPA WPA2 64 bit or 128 bit in ASCII or HEX string Key If Encryption is enabled a key value must be set based on the selected encryption mode AP Setup The AP Setup feature allows LiteShow to connect to the corporate network as a wireless client rather than through the RJ45 wired connection Connect to Existing AP To setup LiteShow as a wireless client choose Enable Note Enabling the Wireless Client will disable both the wired RJ45 connect
30. through WiFi and launch SidePad Receiver SidePad Receiver gt Name liusbin MOP Android s Wa aiting for connection at 92 168 1 68 14 3 Click Launch SidePad from the menu In a few seconds the PC desktop will display on the OS Android device You can now control the PC from your OS Android device MirrorOp SidePad 4 If no iPad Smartphone is detected the SidePad login screen displays SidePad Login Device IF N 0 0 0 User Name PCHOU Connect Cancel Launch WebSlides WebsSlides allows users to broadcast their presentation to up to 64 users simultaneously Note WebSlides is not available when QuadView Is in use 1 Presenter Make sure your PC Mac is connected to LiteShow4 and click Launch WebSlides 2 Audience a Connect to the LiteShow4 WiFi Network shown on the projector b Launch your web browser and enter the LiteShow4 IP address LiteShow English v Login None v Password Login WebSlides View Projecting Screen Copyright 2014 InFocus Corporation All rights reserved c Click the WebSlides button 3 The presenter s slides display fal 1 NebSlides A 4 Use the toolbar to pause save change the aspect ratio expand and refresh the presentation window Notes e WebSlides users and users logged into Liteshow4 both consume wireless bandwidth If more thatn 10 users are logged into LiteShow4 we recommend connecting LiteShow4 to the
31. tions at one time LiteShow gt Conference Control 1 Logout Download Ml Allow control from this page only System Status Name Y Control IP Add Conference Control E ut Taa User 1 1112 13 14 192 168 168 81 User OL 1112 11 3 amp 192 168 168 106 Copyright 2014 InFocus Corporation All rights reserved To allow users to project freely Uncheck the Allow control from this page only box To change presenters Review the available presenters listed under Name and click the Play Control options associated with the desired presenter To enable QuadView Review the available presenters listed under Name and click 1 2 3 or 4 in the Play Control options list Play Control Options ty Full screen presentation Displays presentation in Quadrant 41 Displays presentation in Quadrant 2 3 Displays presentation in Quadrant 3 Displays presentation in Quadrant 4 fa Stops presentation 36 Admin Available only to users logged in as Admin Users Clicking on Admin provides additional administrative options Device Setup Allows you to select the input type the projector s resolution and IWB USB port and disable randomize or apply a static Login Code InFocus LiteShow gt Admin gt Device Setup Logout Device Setup 5 VGA Resolution Network Setup O HDMI XGA 1024x768 v OSD Setup Disable Change Passwords Code Random aN O Use the following code 0 9 Firmware Upgrade IWS HID WebSlid
32. u want to project over and then the LiteShow module you wish to use Login Current Server Server IP User Name Login Code Application Control Panel Menu Min Max Projection a Clos Mode Tab Status Indicator Video Mode Tab Projection Mode Tab Projection Mode Controls H Full Screen projection Project to Quadrant 1 Project to Quadrant 2 LN Project to Quadrant 3 Project to Ouadrant 44 M Stop projecting om Pause projecting Refresh projection O sPpUttt 0 Projection Audio Notes LiteShow can redirect your computer s audio to the projector using an optional VAC driver To enable audio projection you must first install the VAC Setup application located on the USB token Once VAC is installed open the LiteShow application menu select Send Audio to Display select Yes and restart LiteShow Video Mode Tab Video Mode Controls Start playing video music Stop playing video music Mute Volume level o tt o Video Mode Notes Supported formats include MPEG1 2 DivX 3 4 5 XviD MPEG4 H 264 WMV9 MP3 WMA For higher quality video or music playback stream the files from your computer to the Liteshow module Decompression buffering and video processing all take place in the LiteShow module reducing the load on your computer and network Click the Video Mode tab to switch to video mode Choose a video audio file to begin playback on the screen Menu Functions Menu When y
33. uipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help CAUTION The Part 15 radio device operates on a non interference basis with other devices operating at its frequency Any changes or modification to said product not expressly approved could void the user s authority to operate this device FCC CAUTION Any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate this equipment This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation The antenna s used for this transmitter must not be co located or 3 operating in conjunction with any other antenna or transmitter IMPORTANT NOTE FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment This equipment should be installed and operated with a minimum distance of 2 5cm between the equi
Download Pdf Manuals
Related Search