GF0.04 – Operating Instructions
Contents
1. GF0 04 Operating Instructions The hand held transmitter GF0 04 has been designed for the operation of 2 receivers A special function has been allocated to the control keys 5 and 6 that enables to activate and deactivate the sun automatic The code setting is realised by means of a coding switch and a learning mode operating switch located inside the battery compartment above the batteries To make a code setting or to replace the battery open the cover of the battery compartment as described In the event the LED doesn t light up if actuating one of the control keys the battery needs to be replaced Battery 12 V type A23 The following battery types can be used for replacement 23A VA23A MS21 or MN21 Spent batteries must be disposed of in compliance with the relevant national rules currently operative and in force Transmit frequency 433 92 MHz Code setting 1 To change the complete Control keys 1 to 4 for motion commands ransmitter coding in one Control keys 5 to 6 for special functions go slide the left learning t c LED lights up when actuating any control key mode operating switch in EY SD 4 prerequisite battery still in good condition upward direction va DIP switch 9 pole type enable to individual 2 If you d like to change only oY Om codings he coding for the motion c OR Learning mode switch 2 pole type serves for commands or for the special ee ait the coding of the tr2. ansmitter unctions the right learning On HH Battery type MN21 12 V take care to ensure mode operating switch zll lzi that the battery is inserted with the battery too must be slid in upward F Batore TV poles in correct position direction 3 Use the DIP switch to To open the battery compartment use an appropriate tool e g a screw driver set the desired individual codings 4 With only the left learning mode operating switch in top position Actuate any of the control keys provided for the triggering of motion commands or of special functions gt All transmitter codings 6 keys are being set anew With both learning mode operating switches e in top position Actuate any of the control keys provided for the triggering of motion commands 0 All motion command related codings 4 keys are being set anew Other option Actuate any of the control key provided for the triggering of special functions gt All special function related codings 2 keys are being set anew 5 After completion of the desired coding procedure always make sure to slide both learning mode operating switches into bottom position again by all means Note 1 Once the coding procedure is completed the position of the DIP switch can be varied in such manner that no unauthorised persons are able to identify which codings have actually been selected Note 2 With motion commands the transmitter allocates all automatically t
3. he last 2 positions with special functions the last 3 positions of the 9 digit code During any such operation the related DIP switch positions are rendered ineffective The transmitter complies with the relevant technical regulations enacted by the European Community It bears the CE mark and is authorised for use in all EU member states and in Switzerland without any need of prior registration To learn more about the EC Declaration of Conformity pertaining to this hand held transmitter please visit our website at www geiger antriebstechnik de 100W0603 en 0712 Gerhard Geiger GmbH amp Co KG Schleifmihle 6 e D 74321 Bietigheim Bissingen Telephone 49 0 71 42 9 38 0 Fax 49 0 71 42 9 38 230 info geiger antriebstechnik de www geiger antriebstechnik de
Download Pdf Manuals
Related Search