Home

Operating Instructions Busch-ComfortTouch® Busch

1. News Image messaging Recording and displaying of notes Voice message Recording and playback of voice messages E mail Reading of e mails Feed Reader Reading of feeds news feeds Building control KNX Control and monitoring of a KNX bus system Scene editor Editing and calling up of scenes and sequences Weekly timers Editing of weekly timers Calendar twelve month timer Setting specific repeating anniversaries Miele only via Plug In For activating Miele household appliances Logic editor Setting of separate logic functions for implementing complex switching sequences Safety Camera surveillance Display of IP camera images Alarm control unit Protection against unwanted visitors Presence simulation Recording and replay of switching sequences which can be automatically simulated during absence Tools Short time timer Integrating an egg timer Alarm clock Integration of an alarm clock Data logger Recording of data e g energy consumption Web browser Call up of predefined Internet sites Telephony Telephone VoIP Internet telephony Door Communication For the communication with image and sound between the Busch ComfortTouch and an outdoor station Operating Instructions 1473 1 8041 7 Operating Instructions Busch ComfortTouch Function group Function Settings IR remote control Product overview Description Editing and calling up scenes sequences and operating functi
2. Operating Instructions Busch ComfortTouch Operation Reading a handwritten message 5 To read the message touch the icon in the status bar The message centre opens 6 Here select the image message The message is displayed in full page mode The dark blue dot signals a new message 7 Close the message by clicking the cross in the right hand top corner A list of all available messages is displayed News that has been read is marked with a light blue dot All the messages can be selected and read again The messages can also be deleted here To do this touch the following icon Cross icons appear next to the messages A message is deleted by touching it O Note The list of all available messages for a receiver can be called up at any time via the Image messaging function Just select the respective receiver Operating Instructions 1473 1 8041 34 Operating Instructions Busch ComfortTouch Operation 5 3 5 Voice messages The Voice messages function serves for recording and playback of voice messages They are recorded with the integrated microphone and can therefore be played back later Overview D Voice Messaging 1 Press the Voice messages icon in the navigation bar to access the function 2 Press New message to record a new voice message 3 Now select rec red dot and speak into the integrated microphone If you are finished inside a period of 60 seconds press OK
3. Operating Instructions Busch ComfortTouch A member of the ABB Group Busch Jaeger Elektro GmbH PO box 58505 L denscheid Freisenbergstrake 2 58513 L denscheid Germany www BUSCH JAEGER com info bje de abb com Central sales service Phone 49 0 2351 956 1600 Fax 49 0 2351 956 1700 Power and productivity AA BD B for a better world Notice We reserve the right to at all times make technical changes as well as changes to the contents of this document without prior notice The detailed specifications agreed to at the time of ordering apply to all orders ABB accepts no responsibility for possible errors or incompleteness in this document We reserve all rights to this document and the topics and illustrations contained therein The document and its contents or extracts thereof must not be reproduced transmitted or reused by third parties without prior written consent by ABB Copyright 2013 Busch Jaeger Elektro GmbH All rights reserved FADED 1473 1 8041 03 05 2013
4. it is indicated on the Busch ComfortTouch as a door call The Busch ComfortTouch switches automatically to the Door communication function or depending on the setting first issues a message that needs to be confirmed and shows the camera image of the respective outdoor station The user can now accept or reject the call and switch conversation to mute open the door and switch on the light The view can also be switched to a different camera of the outdoor station In addition the user can view all previous events via History progress Images snapshots can be recorded automatically or manually for this cts Door Entry The function is opened either by pressing the Door communication icon in the navigation bar or automatically by an incoming bell call of an outdoor station Depending on the setting a message that must be confirmed appears first Selecting the function via the icon no bell call A call up is practical when one wishes to view an archived snapshot or a current camera image of the different outdoor stations The ring tone can also be deactivated Switching outdoor stations camera image 1 Open a list of connected outdoor stations with the aid of the following arrow on the right side 2 Select the outdoor station The image will now displayed If the outdoor station has several cameras the arrow buttons lt gt can be used to switch between the cameras Operating Instructions 1473 1 804
5. the overview 7 PXI Note When a message is received a notice with icons appears via the Message centre icon indicating the type of message received Operating Instructions 1473 1 8041 13 Operating Instructions Busch ComfortTouch Operation Icon Description Indicates that the alarm control unit has been activated When pressing the icon a selection with Disarm and Open alarm control unit is displayed This function is described in greater detail in section Explanation of functions gt Alarm control unit Indicates that the alarm control unit has been disarmed EB When pressing the icon a selection with Arm and Open alarm control unit is displayed This function is described in greater detail in section Explanation of functions gt Alarm control unit Indicates that presence simulation is being played Presence simulation is activated during prolonged absences such as holidays Your Busch oz ComfortTouch switches the lights and blinds on and off during your absence to simulate someone s presence in the house This function is described in greater detail in section Explanation of functions gt Presence simulation Indicates that presence simulation is being recorded During recording by your Busch ComfortTouch presence simulation runs continuously to constantly we 4 have up to date information available This is how a typical daily routine is recorded and stored T
6. control elements must be positioned there Alternatively the start page can be used to create a second navigation option for such pages that involve functions of an individual room For this up to six floor plan graphics of a living room with appropriate links can be integrated into the start page Please contact your electrical installer who will set up the Busch ComfortTouch for you individually and according to your wishes Blinds C Present Absent fi Operating Instructions 1473 1 8041 28 Operating Instructions Busch ComfortTouch Operation Operating pages Operating pages can be freely configured via the project planning software of the Busch ComfortTouch and are used to provide building control functions lights blinds room temperature controller etc You can for instance operate all the blinds on the one operating page and all the home lights on the next You could also use the operating page for all the functions of one room and the next page for all functions of the next The type of structuring you wish to use is left to you Please contact your electrical installer who will set up the Busch ComfortTouch for you individually and according to your wishes Application pages The Busch ComfortTouch can be equipped with a range of applications e g calendar Media Player etc For this the application pages are inserted into the Busch ComfortTouch via its project planning software Ple
7. reset the step switch off and buttons to call up the next or previous step In addition it uses a slider to show which step is currently on The slider cannot be operated The icon in the middle can be animated during adjusting Operating Instructions 1473 1 8041 23 Operating Instructions Busch ComfortTouch Operation Value display elements value sending elements basic versions which can be adapted further With value display elements values are displayed as text or graphical information in a page of the Busch ComfortTouch They are not operable but are used to display values only With value sending elements you can display values in different formats in a Busch ComfortTouch page and send them to other devices Control element Text display element Status Text Display Function The Text display version can display values and texts that are sent for instance from a temperature sensor There are no direct control elements here Graphic display element Graph Display The Graphics display version can display values graphically which are sent from a temperature sensor for example The values are also displayed as a number For the graphic display element you can choose between a wind rose and a dial type gauge This must have been appropriately assigned in the project planning softwar of the Busch ComfortTouch Please contact your electrical installer who will set up the
8. 26 Systemi SEN ee ner a Wm Oe ne Mee re ee eee eee eee ee 78 5 3 27 Device IMMON MANO 22 2022 220252 5e0nc82asaeacbececauatcacateneceseanaiaascuaceassamencasataceseeeansieactespecesecsetaaceeececenecanicesaoace 79 6 E O a E A E A sen aren genase 80 Operating Instructions 1473 1 8041 2 Operating Instructions Busch ComfortTouch Notes on operating instructions 1 Notes on operating instructions 1 1 General information Please read this manual through carefully and adhere to the information listed This will ensure reliable operation and long service life of your product If additional information is required or problems arise that are not dealt with in this manual the necessary information can be requested from the manufacturer or from your electrical installer 1 2 Setup of the manual This manual provides you with the detailed information about the operation This will ensure reliable operation and long service life of your product The chapters Information on the manual Safety Environmental information and Product overview contain general specifications and basic information as well as a description of functions The operation of the device is explained in chapter Operation Chapter Maintenance contains information about cleaning 1 3 Symbols in the manual Attention damage to property This symbol indicates a possibly harmful situation Non observance of the safety instructions can lead to
9. Busch ComfortTouch for you individually and according to your wishes There are no direct control elements here Value sending element With value sending elements you can display values in different formats see above in a Busch ComfortTouch page and send them to other devices There are no direct control elements here Operating Instructions 1473 1 8041 24 Operating Instructions Busch ComfortTouch Operation Room temperature controller basic versions which can be adapted further Climate control units can be controlled with the control element for room temperature controllers Because such devices have many functions the control element displays only a small excerpt That is why another window can be opened in the Busch ComfortTouch via the control element that displays all functions and information about the room temperature controller O Note The internal room temperature controller of the Busch ComfortTouch is not opened via this control element See room temperature controller Control element Status Function Room temperature The RTC room temperature controller version has a controller push button for opening an additional window The button A also displays the current temperature which the controller regulates The current operating mode and the mode e g Heating of the controller are displayed in the top part of the control element Miele control elements bas
10. Otherwise the recording is automatically terminated after 60 seconds 4 You can interrupt and restart the recoding at any time by again pressing rec white square and then selecting Start Operating Instructions 1473 1 8041 35 Operating Instructions Busch ComfortTouch Operation Voice Messaging 5 Select the receiver of the message by inserting a tick 6 Then press Save An icon appears in the status bar which indicates that a new message has arrived 7 To listen to a message press the icon in the status bar The message centre opens Select the voice message here The message is displayed in full page mode and can be played back The dark blue dot signals a new message 8 Close the message by clicking the cross in the right hand top corner A list of all available messages is displayed Messages that heve been heard are marked with a light blue dot All the messages can be selected and replayed again The messages can also be deleted here To do this touch the following icon Cross icons appear next to the messages If they are touched the message is deleted O Note The list of all available messages for a receiver can be called up at any time via the Voice message function Just select the respective receiver Operating Instructions 1473 1 8041 36 Operating Instructions Busch ComfortTouch Operation 5 3 6 E mail E mails can be displayed without the
11. are for example adjustments of the news services Feeds for the Feed Reader It is activated via the project planning software of the Busch ComfortTouch Please see your electrical installer He will also explain the operation to you Operating Instructions 1473 1 8041 40 Operating Instructions Busch ComfortTouch Operation 5 3 8 Weekly programs Processes occurring on a weekly basis scenes and sequences can be set for each weekday in a clearly arranged way and automated in any number of weekly programs These default settings will then be repeated continuously each week The weekly programs are created via the project planning software of the Busch ComfortTouch Please see your electrical installer The compiling or adjusting on the Busch ComfortTouch can then be carried out by the user Validity intervals e g holidays can be assigned to weekly programs during which the preset weekly program is not triggered but the program of a specially defined day This could be days such as Xmas Sylvester or New Year In this way weekly programs can be automatically activated and deactivated A maximum of 8 periods of validity can be defined Overview Sey Weekly Program 1 Press the Weekly program icon in the navigation bar to access the function The function can also be opened by pressing the date in the status bar The overview displays existing weekly programs The program can be activated deactivated by se
12. be activated directly Operating Instructions 1473 1 8041 Operating Instructions Busch ComfortTouch Operation 5 Operation 5 1 Fundamentals The following pages will guide you through the advantages of the Busch ComfortTouch Intuitive operability easily familiarizes you with the versatility of the technical options The operation distinguishes itself through its clarity and user friendliness O Note However many functions are are available only when the project planning software of the Busch ComfortTouch has been appropriately activated Please contact your electrical installer who will set up the Busch ComfortTouch for you individually and according to your wishes In the project planning software the scope of available functions is specified Also consult your specialist electrical dealer 5 1 1 Colour concept The Busch ComfortTouch is equipped with an intelligent intuitive operating concept The basis is a consistent colour orientation for a better overview and faster recognition of the control element functions The functions Light Blinds Heating and Scenes are illuminated in colour code colour code on the operating surfaces as follows Light I Blinds H Heating Scene Fig 2 Colour concept Colour Function assignment Yellow like the sun Light control Blue like the sky Blind functions Orange like warmth Climate functions Magenta stands for ext
13. damage or destruction of the product O Note This symbol indicates information or references to additional useful topics This is not a signal word for a dangerous situation This symbol indicates information on the protection of the environment Operating Instructions 1473 1 8041 3 Operating Instructions Busch ComfortTouch Safety 2 Safety Caution Risk of damaging the device due to external factors Moisture and contamination can damage the device That is why the device must be protected against humidity dirt and damage during storage renovations and operation 2 1 Intended use The Busch ComfortTouch is a central switching and monitoring location for the entire building automation with control monitoring and visualisation functions for numerous devices and media within a building The device makes available numerous functions The range of functions is contained in chapter Description of Functions O Note The device must only be used in dry indoor rooms Note Making and saving video recordings can infringe on personal rights Always observe applicable legal and labeling requirements for placement and operation of video components 2 2 Improper use The device is dangerious if used improperly Any non intended use is deemed improper use The manufacturer is not liable for damages resulting from such improper use The associated risk is borne by the user operator The device mus
14. e g with value display Dimmers can be used to implement convenient light switches with dimming functions Control element Status Function The version Without slider has a push button for switching on off in the centre and two buttons left and right for stepwise Dimmer without slider dimming brighter darker The version With slider has a push button for switching on off on the left side and a slider for dimming There are two buttons Dimmer with slider to the left and right of the slider for stepwise dimming The version Pop up slider has a push button for switching on off on the left side and another button on the right side The Dimmers with popup slider latter opens a slider for dimming When not actuated the slider closes automatically again after a few seconds Operating Instructions 1473 1 8041 19 Operating Instructions Busch ComfortTouch Operation Blinds basic versions which can be adapted further e g with value display Blind control elements can be used to implement the activate of blinds awnings doors and other motor driven actuators Control element Status Blinds roller shutters Top Bottom Blinds Intermediate positions Function The blind control element has push buttons on the left and right to open or close a blind and if necessary an additional button to stop start in the middle depending on the operating mode sele
15. eared 13 5 2 Operating processes on the touchdisplay ccccecccceeccceeececeeeeceeeeceeceeeeeeeceeceseeeesseeeeeeeeeseeeesseeesseeeas 15 5 2 1 PUO eee eee oe E E ee ee eee Oe ee eee ee eee eee een 15 5 2 2 ola ce Be 21 ais MES arara ee ce ce a ee ee ee ee eee 16 952 3 E N E E PEIE A E E E I ee es E IE E A ees tee eee 27 5 2 4 SWI TOTO Fe SCM OU MOS ermenin E aN a Ena ii 27 5 3 Explanation OF TUNCUONS o2sicccecesiero dietcues dade deddd aia aea a ra a d aaan sence aea hararei aienea Erais 28 5 3 1 FS SS gare cic cet cere ar a an ears ccc Vansant sev we aac E dud Van ese tiva on ad Sanne Peat van cea eae an ven ens 28 5 0 2 Basic functions of switching dimming blinds value scenes RTC and measured values 29 5 3 3 Vedita OF ceascdascacnnctasateaansiaanacssuatccanseaaadvsasancnaneadnauagraansiwesutpmaasranasinceadamaacutastuss ademeascuanerepadeasageenmnius 30 5 3 4 PTAC TINS S SAIN PEE N EAE E T T ET avaceh susie samesa teats desma A AAE E E E A 32 5 35 NM OIGC MES SAJE Sirsi a E eE a e E 35 5 3 6 Ee a A E nets eeeeecim aioe eee eeteeeoeeaeee erm snieeeeaceend 37 5 3 7 Foe E e AET eE A E E E E E ane saewescet baecagecoestodesteeees 39 5 3 8 Weekly programs scicisnsativncanaescdonsacivaenansunssnandivenenterdenenliviananianioneviivsacacindoasaisieasnsertinavinocnaaeunbascrianionias 41 5 3 9 Calendar twelve month timer cccccceccccssecccsseecccseecceuscecsueeeceuueecceecesseeeessuueeeseseessegeeessueeessee
16. five different short time timers Egg timers can be activated on the Busch ComfortTouch A tone sequence can be set after the time has expired There is also the additional option of running an automated scene at the start and or end of a short time timer 5 Short Timer 1 Press the Short timer icon in the navigation bar to access the function The overview displays the available shot time timers Here the timers can be set 2 Touch the hours or minutes The setting is made via 3 Start the time sequence with the Start button gt This can be stopped at any time with the Stop button m Via Activate scene you can activate scenes that have been assigned to the timers O Short Timer 4 Seta tick to specify whether the assigned special scene is to be played at the start and or at the end for adjustment of scenes see Scene editor Operating Instructions 1473 1 8041 51 Operating Instructions Busch ComfortTouch Operation 5 Confirm the changes by touching the tick in the right hand top corner Via the arrow in the top bar you again return to the overview O Note At the end of the running time a message appears which must be confirmed Operating Instructions 1473 1 8041 52 Operating Instructions Busch ComfortTouch Operation 5 3 15 Alarm clock Specific weekday times can be set for activating a specific scene for waking up e g starting the Media Player with
17. one s favourite music It is also possible to set a scene to precede the alarm to prepare the home environment for its occupants prior to rising the heating for example is switched on already one hour before to the alarm clock This allows a scene or a sequence to be started for the lead in time specific time set before alarm time for alarm time at activation of Snooze and switching off the alarm clock Alarm Clock 1 Press the Alarm clock icon in the navigation bar to access the function The overview displays the available alarm clock for each weekday Here the alarm clock can be set individually 2 Touch the Hours or Minutes The setting is made via It is activated by setting a tick next to the weekday You can set a tick on All to activate all days If you do not wish to be woken the next day set a tick at Not tomorrow 3 Activate the the scenes assigned to the alarm clocks with Activate scene Lead in Time 00 Alarm Clock Operating Instructions 1473 1 8041 53 Operating Instructions Busch ComfortTouch Operation 4 Seta tick to specify whether the assigned special scene is to be played for Wake up Off Snooze or Lead in for adjustment of scenes see Scene editor The lead in time can be set individually 5 Touch the Hours or Minutes The setting is made via 6 Confirm the changes by pressing Save Via the arrow next to Save you aga
18. party The name appears in the right field Fam Mustermann Se Telephony Operating Instructions 1473 1 8041 59 Operating Instructions Busch ComfortTouch Operation 3 Touch the following button The connection is being made The time starts to run as soon as the call is answered 4 Terminate the call with the following button O Note Several parties may be called simultaneously as a group For this you need to set a tick at several entries in the address book The image on the right shows this accordingly O Note ii Via the Web interface there is the option of making settings independently on the Busch ComfortTouch Practical changes in the Busch ComfortTouch are for example adjustments to the address book for the telephone application It is activated via the project planning software of the Busch ComfortTouch Please see your electrical installer He will also explain the operation to you Operating Instructions 1473 1 8041 60 Operating Instructions Busch ComfortTouch Operation 5 3 19 Door Communication The Door communication function makes communication with image and sound possible between the Busch ComfortTouch and an outdoor station For this up to five outdoor stations can be configured in the network In addition up to three cameras can be assigned to each outdoor station When the visitor presses the bell of an outdoor station VoIP outdoor station
19. up the next or previous step Also the step currently switched is displayed The icon can be animated during adjusting A switchover from Automatic mode no fan speed levels can be activated to Manual mode Operation The modes and settings are visually highlighted by means of a colour system A white temperature display indicates that a mode e g heating has been started Some typical applications are shown in the following Heating mode active Star heating mode since the actual temperature is lower that the set point temperature The mode is additionally displayed by means of an orange coloured bar The difference between the actual and set point temperature is displayed in a lighter shade The fan here is also started automatically 21 5 C Manual adjustment The set point temperatures can also be adjusted manually Simply press the controller A circle appears which can be appropriately moved 21 0 C W Operating Instructions 1473 1 8041 73 Operating Instructions Busch ComfortTouch Operation Eco mode Eco mode is indicated by means of a green bar Additional settings cannot be made The settings are made via the project planning software of the Busch ComfortTouch Here it can also be specified that a manual adjustment is admissible Only fan operation Here only the fan system can be operated for a description see above The room temperature controller is deactiv
20. 0 An option opens when pressing the time Here the Time settings can be selected Additional time relevant functions Alarm clock and Timer are available for selection depending on the activation The functions are described in greater detail in section Explanation of functions Displays the current room temperature as well as the current operating mode of the local room temperature controller iE a 1 g C Displays the current room temperature as well as the current operating mode of the local room r a a temperature controller via different icons With a press on the temperature the local room temperature controller opens This function is described in greater detail in section Explanation of functions gt Room temperature controller I When you touch the pin 1 you can hold the screen view since your Busch ComfortTouch switches 7 to the start screen after the expiry of a time interval After the activation the icon looks like icon 2 2 ae Indicates the logged in user group T If the icon does not appear in the status bar one is logged in as guest The message centre is displayed after pressing this icon All currently received messages are displayed here Also Image message and Voice message are available for selection calls not accepted e mails or system messages The icon appears brighter as soon as a message is received After the message is opened in the Message centre it is deleted from
21. 1 61 Operating Instructions Busch ComfortTouch Operation Open and edit the history progress of snapshots 1 Open alist of connected outdoor stations with the aid of the following arrow on the right side 2 Now select the outdoor station 3 Press History cts Door Entry 4 Select an entry The snapshot is displayed With the aid of the arrows one can switch between all snapshots of the outdoor station Operating Instructions 1473 1 8041 62 Operating Instructions Busch ComfortTouch Operation 5 Press OK The overview is displayed again 6 Press the tool icon for editing 7 Select an entry from the list This entry Snapshot can be deleted with the cross on the right side The entry can also be exported with Export For this additional pages open which enquire the storage medium and the directory O Caution The entire list can be deleted with the cross next to Export 8 Return by pressing each time on the following arrow Deactivating the ring tone The ring tone can be activated or deactivated via the following buttons top right Button Description Activating the ring tone the ring tone is on the icon is white acam Deactivating the ring tone the ring tone is off the icon is white The icon is also displayed in the status bar Operating Instructions 1473 1 8041 63 Operating Instructions Busch ComfortTouch Operation The
22. 1473 1 8041 03 05 2013 Busch ComfortTouch 9 8136 09 811 500 CP U 9 3 1 8 136 09 825 500 CP U 9 4 1 Busch ComfortTouch 12 1 8136 12 811 500 CP U 12 3 1 8136 12 825 500 CP U 12 4 1 Power and productivity AA E E for a better world PA LD ay Operating Instructions Busch ComfortTouch 1 Nolas on OD Sr AUG Mo NuUCUONS uassi inoin eiaa are ia bodes biuvunede Ea a E aa ai 3 1 1 Genera WMO FAM sorse EE EEEE EE ENERE AEE EEEE EENET 3 1 2 SEU orhe Manual ioc oes a cae age ace es ae an ee recs Se eee cca ede cece ocean eee 3 1 3 Sao aean eA MAMA xecscecedaceus AT E E 3 2 E E A AE EEEN EA E E OEE TAA E EAN TE A EE EE N E AE EET 4 2 1 FSCS Gh SC ccs E E E EE E E E E E E E E T 4 2 2 MODO US O ea ee ce sce be ene ecie oe nee eevee tie ede ee eee ieee se aceceeciecmco neta deena 4 2 3 VATE and ANT ANU seserinis ee E a A Er E E E E E RAEE EEE ia 9 3 EANO E aaee E E R a E 5 4 PO TO a E E E T ane eee Tere ere ne ene 6 4 1 Odo deS sese a E E EE E E E E E E 6 4 2 FUNCION OVENI OW sariari se se E E E a ea E rr E E E E E T 4 3 EGC SS OUND E 9 s J 2 5 O srar S 10 5 1 FONO NOMA rete i cre A N EO EE 10 5 1 1 Colour on eDiena sea ence a A Se cette ease ese seat aah 10 5 1 2 Basic setup OF the MON MOP siccccs casecesccetecndetessceucect eine taeseaeinceSeaedetabexaeeceheneeniasesddaecPeasneebeaadeecheieniaseseencciers 11 5 1 3 Navigalon DAT sisene e a ar Ea eE aE OE oia a 12 5 1 4 SA DA a E E ae eenereee cusee erate
23. The Busch ComfortTouch records weekday specific up to 20 objects of all actions precisely to the minute and then plays these back O Note This function does not have a direct application page It is deactivated activated via the status bar with the following icons E 4 aam Please note that you must always create a presence simulation beforehand so that the simulation can be played back later 1 Open the function by pressing the icons shown above Additional text windows are then displayed Record scene 2 Press Record scene to record a presence simulation Play scene 3 Press Play back scene to play back the presence simulation recorded The status of the presence simulation is displayed in the status bar aA J This icon indicates that presence simulation is being recorded During recording by your Busch ComfortTouch presence simulation runs continuously to constantly have up to date information available This is how a typical daily routine is recorded and stored This icon indicates that presence simulation is being recorded Presence simulation is activated during prolonged absences such as holidays Your Busch ComfortTouch switches the light and blinds on and off during your absence for example to simulate someone s presence in the house Operating Instructions 1473 1 8041 50 Operating Instructions Busch ComfortTouch Operation 5 3 14 Short time timer Up to
24. ality colour touch displays in 16 9 format with a resolution of 800 x 400 pixel for the 9 display and 800 x 1280 pixel for the 12 1 display The Busch ComfortTouch consists of a basic system on a modern computer platform that is also designed for future tasks and is capable of being upgraded The unit is of fan free cooling design and does not require a mechanical hard disc to store the platform independent operating system in the device The Busch ComfortTouch is a central switching and monitoring location for the entire building automation with control monitoring and visualisation functions for numerous devices and media within a building It unites the functions of a building control system and an information and entertainment centre on a single monitor Using the colour display it is possible to switch on or dim lights in the entire building control the blinds or regulate the room temperature or scenes using a combination of the functions mentioned above even via remote control Operation and control is carried out via the labelled touch surfaces in a clear menu structure and or via floor plans and room views The labelling code is of a design that is understood internationally and does not rely on language They can be supplemented by easily understood function icons No lettering is needed You can design the touch surfaces to your individual preferences independent of the parameter settings The display has LED backlighting The integ
25. apted further Simple switches can be implemented with push buttons This makes light switches or switches for simple switching processes based on push buttons possible Control element Status Function Push button Light A simple light push button always transmits the same value when actuated Its status remains unchanged e g On A reverser light push button alternately sends one of two values when actuated and alternates between two statuses e g On and Off o ya Light Push button Neutral A simple neutral push button always transmits the same value when actuated Its status remains unchanged e g On Switch Neutral A reverser light push button alternately sends one of two values when actuated and alternates between two statuses e g On and Off Rocker switch Neutral A neutral push button with rocker function when actuated on the right Neutral or left side of the rocker sends out a switching telegram A A differentiation is made between whether the rocker is actuated on the left or on the right side This allows one of two versions to be selected A neutral push button with rocker function can be used to Neutral call up two different scenes for example in the example Presence or Absence Operating Instructions 1473 1 8041 18 Operating Instructions Busch ComfortTouch Operation Dimmers basic versions which can be adapted further
26. art time By setting a tick you can also specify whether the Astro function is to be activated The Astro function can for example be used to automatically raise or lower blinds a few minutes earlier or later each day in dependence of the annual season A lock function with Not before and Not after allows the set times to be adjusted to the Astro function For this a tick must have been set in the lock function 11 Touch the Hours or Minutes The setting is made via 12 Press OK You return to the overview of scenes Operating Instructions 1473 1 8041 43 Operating Instructions Busch ComfortTouch Operation 5 3 9 Calendar twelve month timer Via the calendar function you can specify times on certain days of the year when special scenes are triggered These default settings can be repeated annually ey Calendar 1 Press the Calendar icon in the navigation bar to access the function The overview by means of coloured boxes shows the days that have been specified 2 If you wish to specify additional days or you wish to change specifications touch a month February ey Calendar 3 Touch one or several days in the calendar They are highlighted in colour For these days special scenes can be specified via the scene editor see Scene editor Additionally the time of the day at which the scene is to start can be specified via Start time By setting a tick you can also speci
27. ase contact your electrical installer who will set up the Busch ComfortTouch for you individually and according to your wishes Each application page has access in the navigation bar February ey Calendar O Note The page types can contain buttons control elements as well as input options The basic operation is explained in section Control processes at the touchdisplay 5 3 2 Basic functions of switching dimming blinds value scenes RTC and measured values The basic functions are carried out via the operating page with the aid of control elements These control elements are described in detail in section Control processes at the touchdisplay gt Control elements Operating Instructions 1473 1 8041 29 Operating Instructions Busch ComfortTouch Operation 5 3 3 Media Player The Media Player serves for the playback of audio and video data as well as Internet radio streams and Internet TV streams O Note Both MP3 music data and films with MPEG2 code can be replayed directly unless they are copy protected by DRM Digital Rights Management Directory i Media Player Press the Media Player icon in the navigation bar to access the Media Player Via the directory you can select whether you wish to read in audio or video data via USB stick or SD card Here you can also open the lists of the Web radio stations and Web TV An example of how to start a radio station is shown in the follow
28. ated No settings can be made To reactivate the room temperature controller the operating mode Room temperature controller deactivated must be pressed again Operating Instructions 1473 1 8041 74 Operating Instructions Busch ComfortTouch Operation 5 3 24 Date and time settings Set date The current date is displayed in the status bar So 06 04 08 1 Press on the date An option opens 2 Here select the Date setting Additional date relevant functions are available for selection depending on the activation Date and Time DD MM YY 3 Select the date format Press the arrow to open an options list 4 Press an entry here 5 Set the date 6 Touch the day the month or the year The setting is made via 7 Press the Save button Operating Instructions 1473 1 8041 75 Operating Instructions Busch ComfortTouch Operation Set time The current time is displayed in the status bar 1 Press the time An option opens 2 Here select the Time setting Additional time relevant functions alarm clock and timer are available for selection depending on the activation Date and Time 3 Select the date format Press the arrow to open an options list 4 Press an entry here 5 Set the time 6 Touch the hours or minutes or the seconds The setting is made via 7 Press the Save button Operating Instructions 1473 1 8041 76 Operating Inst
29. bar stands for exactly one page Pressing an access takes you directly to the respective page Also the functions are activated via the pages The various accesses can also be bundled topically Then after a press an option opens for calling up operating pages or application pages With a swiping motion of the fingers the bar can be moved back and forth This shows all elements one after the other Access to the start page is provided on the left edge of the navigation bar i gt Fig 4 Moving the navigation bar with swiping motion O Note The icons for the buttons accesses can be selected individually Operating Instructions 1473 1 8041 12 Operating Instructions Busch ComfortTouch Operation 5 1 4 Status bar Fig 5 Status bar Example The status bar displays information about your Busch ComfortTouch with the aid of icons Applications and functions can also be called up and activated directly by pressing the icons The following list shows a selection of important icons that can be displayed in the status bar additional symbols are available Icon Description Displays the current date S 06 04 08 An option opens when pressing the date Here the Date settings can be selected m i l Additional date relevant functions are available for selection depending on the activation The functions are described in greater detail in section Explanation of functions Displays the current time 4 0 z 2
30. ch This is for example current news weather information traffic information etc Overview E Feed Reader 1 Press the Feed Reader icon in the navigation bar to access the function The list shows the Feeds news services that have been previously specified via the project planning software of the Busch ComfortTouch Please see your electrical installer A blue dot shows that the latest news has arrived at the Feeds Otherwise the dot remains light blue An update can be made via the following ie 5 F An icon appears in the status bar which indicates that news has arrived Note The project planning software can also be used to specify whether Feeds are displayed as news feeds on the start page The ones that are to be displayed can be selected in the overview by setting a tick at On start page The news is opened in the Web browser by pressing on an entry E jil Operating Instructions 1473 1 8041 39 Operating Instructions Busch ComfortTouch Operation ARD tagesschau Feed Reader 2 Press an entry to open the Feed The list of news received with a blue dot indicates new ones that have not yet been read News that has been read is marked with a light blue dot The news is opened in the Web browser by pressing on an entry O Note Via the Web interface there is the option of making settings independently on the Busch ComfortTouch Practical changes in the Busch ComfortTouch
31. cted The button in the middle can display the status An appropriate animation is displayed during the movement Operating procedure Icons for up down Brief press of the button Movement by one step the icon in the centre does not change Long button press Movement up to stop the icon in the centre changes Stop When the end stop has been reached or a brief press on icon Up Down depending on the direction of movement Change The change of direction of movement with a brief press on icon UP Down Followed by a long press on icon Up Down depending on the desired direction of movement Icon in the centre Blind Brief press of the button Movement up to stop the icon in the centre changes Stop When reaching the end stop or the intermediate position with a brief press on the icon The icon then indicates the direction to be taken during a renewed movement If the blind was in the end position top bottom it automatically moves in the other direction Up Down Change The change of direction of movement with a brief press on icon Followed by a press on icon Up Down depending on the desired direction of movement Followed by a renewed press in the icon in the centre Operating Instructions 1473 1 8041 20 Operating Instructions Busch ComfortTouch Operation Scenes sequences basic versions which can be adapted further With the Scene control element the use
32. e Busch ComfortTouch are used to fulfil the basic functions of Switching Dimming Blinds Value Scenes RTC and Measured values The elements can include switches buttons and sliders This makes possible the button mode executing the function with one press the tipping mode executing the function by pressing and holding as well as controller mode moving a slider The following selection shows the most commonly used control elements available in the Busch ComfortTouch The type and appearance of the control elements may vary due to individual adaptation O Note The type and appearance of some control elements has been fixed and cannot be altered e g volume control However for some control elements e g light switches individual formats also icons can be selected This must be appropriately activated in the project planning software of the Busch ComfortTouch Please contact your electrical installer who will set up the Busch ComfortTouch for you individually and according to your wishes Basic structures of control elements 1 2 3 4 9 Fig 6 Different statuses of the same control element 1 Status display of Device 2 Designation of Control element 3 Function button 4 Status display of Device 5 Function button Control element Description Status display of device 1 The device is switched off lettering is dark Designation of control element 2 Light control Yellow Blind f
33. e camera image Archived camera images can be called up via the archive Operating Instructions 1473 1 8041 46 Operating Instructions Busch Comfort Touch Operation O Note The project planning software can also be used to specify whether camera surveillance is displayed as a small window at the start page The current camera image is the displayed permanently With a press on this window the Camera surveillance function opens Operating Instructions 1473 1 8041 47 Operating Instructions Busch ComfortTouch Operation 5 3 12 Alarm control unit The Busch ComfortTouch can monitor message circuits contacts and display their status This enables the panel to monitor the security of the building and if necessary to transmit messages about unauthorized access For this purpose movement detectors glass break sensors window sensors and further contacts can be integrated O Note ii The alarm control unit is not intended to serve as a VDS certified German Association of Property Insurers alarm system but to merely offer the option of monitoring windows doors or interior rooms via movement detectors It is no substitute for an alarm system The status of the alarm control unit is shown in the status bar This function is opened by pressing the icons The function can also be called up via the navigation bar This icon indicates that the alarm control unit has been armed When pressing
34. ees 44 5 3 10 Miele only via PUGH gees sttnceccececetttedvantistngeces nanea aa raiar Anen raia EOE Ea ENRE EAR EAEE E raai 45 5 3 11 Camera Surveillante aaa eee te ne ee ene eee ee ere ee r 46 5 3 12 Alarm Conroe inrter EE EEE E a 48 5 93 13 Presence simulation aa tedavecceccsvedexccecnscnsshecebedeescedcedstecedelednedadteianedekcinedslesscanccevedsnssd esenadeseinedselsiacenekecndent 50 5 3 14 HOC O p E rE EE EE E E eee 51 5 3 15 PANU OCR asean E E E AAEE A EE E E 53 5 3 16 Erehe esc pr E E E A EE T ETE T 55 5 3 17 WV GD OWS Git earran era nase a R E E nies eoseearacete wes maeereee 56 5 3 18 Telephone VOIP esc ctesaeeacecees shee ccae onsen on re EA onceoseisen E sa0eom 57 5 3 19 Door CGI TCO ssie eeaeee EEE E e EE e AEE AEE AEE 61 5 3 20 Fault and alarm MESSAGES ccccceccccseeceeeeeeeeeeeeeeeeeeeeeeseeeeee sees eeesaeeeseeeeeaeeeeseeeeseeeeseesesseeeeaeeeesseseeaees 66 5 3 21 WU MNO OU Orcs E E E ic eet ee E E EA AE ae tne E 67 5 3 22 S107101 lt 10 110 eee eee ene eee eee ne eae en eee eae 68 5 3 23 Room temperature controller ccccccceccceeeceececeeeceuecceeceeceusecueesueceueesacesseecsueecaeesseeseueesaeeseeesaueeseeess 71 5 3 24 Date and time settings saute ncaessnecstacrensndtaatncseetreadiaes eicsleiemeceniiakacsninnsdeesemaatedeecnouanswationateniiiewedidus 75 5 3 25 Import and export OF MNOS sires csesedcc eas consbecvecsesteiaeesicwasensGasts bontdeeuedcete dese eiasien Sede basitlwiee decodes aise Geeeredes 77 5 3
35. equence to be called up must be assigned appropriately in the project planning software of the Busch ComfortTouch Please contact your electrical installer who will set up the Busch ComfortTouch for you individually and according to your wishes Operating Instructions 1473 1 8041 Se Operating Instructions Busch ComfortTouch Operation Step switches basic versions which can be adapted further You can implement switch sequences with step switches A step switch effectively combines several push buttons into one control element Status Function Control element Step switch Device is off The version without step display and without slider has two without step display Device on and adjustable as soon as the upper setting limit has been reached the right icon appears dark in this example Step Switch 2 buttons left and right for calling up the next or previous step and a button in the centre By pressing the right left button a few times one reaches the next higher or lower step The button in the middle returns the step switch to the bottom step Off The icon in the middle can be animated during adjusting Step switch with step display Device is off Device on and adjustable adjustment only with buttons gt slider only displays Step Switch Tg Step Switch Li Step Switch ef The version with step display with slider has a button to
36. erating Instructions Busch ComfortTouch Operation 5 3 22 Scene editor The Scene editor function offers the user the option of changing scenes and sequences which have been created in the project planning software Standard scenes The end user can also change so called Special scenes that have been permanently assigned to an application page or a software module e g alarm clock scenes O Note In the Scene editor on the Busch ComfortTouch the user cannot create new scenes This is only possible with the scene editor in the project planning software Overview Scenes And Sequences You reach the function by pressing the Scenes and sequences icon in the navigation bar The function can also be opened via other functions that operate with scenes Here the editing function opens directly see the following instructions The overview shows the available categories of corresponding scenes and sequences 1 Select a category E Scenes And Sequences The overview shows the scenes and sequences that can be played The scene can be activated deactivated by inserting a tick Additionally the status of the scenes and the remaining times are displayed here after they are started Operating Instructions 1473 1 8041 68 Operating Instructions Busch ComfortTouch Operation 2 Select an entry scene to edit it The scene can now be started with the aid of the Control element see section Cont
37. erating window is identical for both room temperature controllers Operating Instructions 1473 1 8041 71 Operating Instructions Busch ComfortTouch Operation The following figure shows an example of the an overview of the control and display elements of the room temperature controller elements are available or not according to the setting in the project planning software of the Busch ComfortTouch Fig 8 Overview of the control and display elements of the room temperature controller 1 Operating modes 2 Set set point temperature 3 Actual or set point temperature 4 Mode display 5 Button for confirming the settings 6 Fan settings 7 Actual temperature 8 Controller for manual adjustment Operating modes Description White icon when the operating mode is active The room temperature controller is deactivated Presence comfort temperature the residents are at home J Absent eco mode cost saving temperature the residents are not at home The operating mode is activated by pressing the icons The icons appear also in the status bar or the control element Mode display Mode display Description Cooling mode Eii Heating mode Operating Instructions 1473 1 8041 72 Operating Instructions Busch ComfortTouch Operation Fan setting The fan setting is a Step switch The fan setting has a button to reset the step switch fan icon off and buttons to call
38. function opens automatically at an incoming bell call Door Entry When the visitor presses the bell of an outdoor station it is indicated on the Busch ComfortTouch as a bell call The Busch ComfortTouch switches automatically to the Door communication function or depending on the setting first issues a message that needs to be confirmed and shows the camera image of the respective outdoor station Via the project planning software of the Busch ComfortTouch it can also be specified that the camera image is displayed in full page mode Please see your electrical installer Control options Accept the bell call Activate the door opener at the outdoor station wie Activate the light at the outdoor station Deactivate the light at the outdoor station Control options after acceptance of the bell call Mute function off sound transmission to the outdoor station Mute function on no sound transmission to the outdoor station Create images snapshots manually Ending a bell call me Switch between the different cameras of an outdoor station Operating Instructions 1473 1 8041 64 Operating Instructions Busch ComfortTouch Operation O Note The project planning softwar of the Busch ComfortTouch can also be used to specify how long the function remains open until it is automatically closed Please see your electrical installer The running time is al
39. fy whether a repeat is to take place each year 4 Activate the specification by setting a tick Operating Instructions 1473 1 8041 44 Operating Instructions Busch ComfortTouch Operation 5 3 10 Miele only via Plug In O Note A link to certain Miele appliances can be established with aid of this function This function is only available with the aid of a special plug in Please see your electrical installer A separate description is available for this function Operating Instructions 1473 1 8041 45 Operating Instructions Busch ComfortTouch Operation 5 3 11 Camera surveillance Camera surveillance provides fast visual information about events occurring within the detection range of connected cameras The surveillance cameras can be triggered and the transmission signal displayed The application can be used to display the images from up to eight with the 9 display or ten with the 12 1 display network cameras also internal camera modules or other Busch ComfortTouch cameras Camera Surveillance 1 Press the Camera surveillance icon in the navigation bar to access the function The overview displays the current images of the available cameras in small image form With a double press on a small image the full page mode is opened for the respective camera image Camera Surveillance 2 Depending on the type of camera you can control the camera or reduce or enlarge the size of th
40. g time Start saver running time Monitor off effects interval change and order Modification of system settings 1 Select a category 2 Then select the desired entry or first the sub list and then the entry 3 Make the settings on the right hand side 4 Press the Save button Operating Instructions 1473 1 8041 78 Operating Instructions Busch ComfortTouch Operation 5 3 27 Device information Important information about the device is available in the Busch ComfortTouch via System gt Device information This includes the IP address the MAC address and the contact details of the manufacturer Operating Instructions 1473 1 8041 79 Operating Instructions Busch ComfortTouch Cleaning 6 Cleaning Dirty units can be cleaned with a slightly moistened cloth If this is insufficient the cloth can be moistened also with a soap solution Caution Incorrect cleaning can damage the device Incorrect cleaning agents can cause permanent damage to the surface of the device Never use caustic cleaning agents or solvents O Note Cleaning blockage To ensure that no functions is triggered unintentionally when cleaning the Busch ComfortTouch the control elements can be blocked for a certain period The cleaning blockage is activated with a long press of the start button It is automatically deactivated after 30 seconds Operating Instructions 1473 1 8041 80
41. his function is described in greater detail in section Explanation of functions gt Presence simulation Indicates that the the volume is active not mute With a long press of this icon the volume controller is displayed By shifting the controller you set the m iA volume foe all applications of the Busch ComfortTouch A brief press of this icon switches the volume to mute and the following icon is displayed Indicates that the the volume is mute not active A brief press of this icon switches the volume to active and the previous icon is displayed Note If you set the volume on Mute the alarm clock does not generate an alarm tone Operating Instructions 1473 1 8041 14 Operating Instructions Busch ComfortTouch Operation 5 2 Operating processes on the touchdisplay 5 2 1 Buttons Operating surfaces are generally termed buttons which are frequently used in user operating surfaces The user can trigger a function by touching the button In the Busch ComfortTouch these are among others icons e g in the navigation and status bars data displays and lettering e g date and time display in the status bar list entries e g options lists menus and graphically highlighted elements Examples of buttons in the Busch ComfortTouch Operating Instructions 1473 1 8041 15 Operating Instructions Busch ComfortTouch Operation 5 2 2 Control elements Control elements in th
42. ia Tool icon E you access the next overview Here the messages can be exported or deleted With the arrow icon you go back Operating Instructions 1473 1 8041 66 Operating Instructions Busch ComfortTouch Operation 5 3 21 IR remote control The Busch ComfortTouch can be controlled via an RC5 or B amp O capable remote control To do this the functions of the Busch ComfortTouch are programmed to an IR remote control For this the available IR functions are predefined in the Busch ComfortTouch by the electrical installer with the aid of the project planning software Programming of a new IR remote control is also possible on the device later Cy IR Remote Control 1 Press the IR remote control icon in the navigation bar to access the function The functions suitable for the IR remote control are described on the left 2 Press an entry in the list and then Teach in to assign this function to the remote control A time of 5 seconds runs down 3 During this time press a button on the remote control to assign the respective function to this button To do this point the remote control towards the Busch ComfortTouch When this process is successful a tick appears in Assigned 4 Select an entry from the list The assignment can also be deleted at any time 5 The press Reset When this process is successful the tick is removed from Assigned Operating Instructions 1473 1 8041 67 Op
43. ic versions which can be adapted further With the Miele control element you have the option of transferring information and data about kitchen appliances from Miele to the Busch ComfortTouch and to call this information up there It is also possible to remotely control certain appliance functions with the Busch ComfortTouch and to implement these for KNX devices This function is an option and only available with a corresponding plug in More detailed information is available from your electrical installer Links in the floor plan Links in the floor plan are used to jump to individual operating pages from the start page Control element Status Function Links Some forms are possible They must be The control element of the link can be selected within the Pages created appropriately in the project planning field This opens the operating page which was linked Room view software of the Busch ComfortTouch Web Internet site Please contact your electrical installer who Note Camera will set up the Busch ComfortTouch for you The operating page to be linked must have been News centre individually and according to your wishes appropriately assigned in the project planning softwar of the Busch ComfortTouch Please contact your electrical installer who will set up the Busch ComfortTouch for you individually and according to your wishes Operating Instructions 1473 1 8041 25 Operating Inst
44. in access the overview O Note After the alarm clock has been activated the alarm clock icon appears in the status bar Here all the time settings can be called up again Operating Instructions 1473 1 8041 54 Operating Instructions Busch ComfortTouch Operation 5 3 16 Data logger The data logger integrated in the Busch ComfortTouch can graphically display data for up to eight communication objects If these communication objects with sensors are linked via group addresses then the energy consumption of a house the power of a photovoltaic system or the fill level of an oil tank can be visualised for example The Busch ComfortTouch can store the values as file in a specified directory to allow the determined values to be further processed The following storage media can be used SD Card USB stick Network SSeS eee a Data Logger 1 Press the Data logger icon in the navigation bar to access the function If several views are available they are listed on the right side The respective view opens when an entry is touched The values can be reset via Reset With the aid of Export the data of the specified directory are exported Operating Instructions 1473 1 8041 55 Operating Instructions Busch ComfortTouch Operation 5 3 17 Web browser Also Internet sites can be called up and displayed in full screen mode with the integrated Web browser of the Busch ComfortTouch Predefi
45. ing An entry must be selected in the options list on the left side Only then can the play button on the right hand side be activated The replay starts immediately Web Radio Stations i Media Player Operating Instructions 1473 1 8041 30 Operating Instructions Busch ComfortTouch Operation during the replay of audio and video files An operating bar appears during the replay 1 2 3 rn 1 Expired time 2 Slider for Forward and Back 3 Opening the second view Operating bar see the following figure 4 3 6 7 4 Expired time 5 Pause during Pause the icon Start gt appears 6 Stop 7 Volume control opens The replay can be terminated anytime via the cross in the top right hand corner Additional details about the Web radio and Web TV Operation Audio can be provided by the integrated speaker or in stereo via the Audio out output with a connection to an external sound system or active speakers Up to ten streams each can be set via the project planning software of the Busch ComfortTouch The image can be displayed in reduced size at the upper left or in full screen mode Note O The quality of the full screen display depends on the image size of the stream being broadcast Note O mi Via the Web interface there is the option of making settings independently on the Busch ComfortTouch Practical adjustments in the Busch ComfortTouch are for examp
46. le station adaptation for streaming Web TV and Web radio It is activated via the project planning software of the Busch ComfortTouch Please see your electrical installer He will also explain the operation to you Operating Instructions 1473 1 8041 31 Operating Instructions Busch ComfortTouch Operation 5 3 4 Image messaging The Image messaging function serves for recording and displaying notes This enables user to leave image messages for other user on the Busch ComfortTouch An image message is a handwritten text message or drawing created with the stylus pen or a finger on the display Overview a Image Messaging Press the Image messaging icon in the navigation bar to access the function 1 Press New message to record a new image message 2 Use the operating bar for the selection of the tasks 1 2 3 1 Selecting the line colour 2 Deleting the previously created text stroke 3 Confirm and open the next view Operating Instructions 1473 1 8041 32 Operating Instructions Busch ComfortTouch Operation Leave a handwritten message for members of you family and others O Note It is best to use the stylus pen 3 Select the receiver of the message by inserting a tick Overview a Image Messaging 4 Press Save An icon appears in the status bar which indicates that a new message has arrived Operating Instructions 1473 1 8041 33
47. ned Internet sites can be called up on the Busch ComfortTouch For this up to 20 bookmarks for Internet sites can be stored in the project planning software for the Busch ComfortTouch When the Web browser starts a list of all stored bookmarks are displayed This list can be selected at any time When the user selects an Internet site it opens 1 Press the Web browser icon in the navigation bar to access the function The buttons have the following functions Button Function One page back One page forward Call up of the Bookmark list Scaling Quitting the loading process also a progress bar appears during the loading process Update 2 Close the Web browser by clicking the cross in the right hand top corner O Note ii Via the Web interface there is the option of making settings independently on the Busch ComfortTouch Practical changes in the Busch ComfortTouch are for example adjustments of the favourite Internet sites for the Web browser It is activated via the project planning software of the Busch ComfortTouch Please see your electrical installer He will also explain the operation to you Operating Instructions 1473 1 8041 56 Operating Instructions Busch ComfortTouch Operation 5 3 18 Telephone VoIP With the function Telephone VoIP the Busch ComfortTouch can be used as an Internet protocol telephone VoIP telephone Please check the req
48. need for a separate computer E mails can be easily answered via a graphic or voice message bo Email 1 Press the E mail icon in the navigation bar to access the function The list of e mails received with a blue dot indicates new ones that have not yet been read E mails that have been read are marked with a light blue dot 2 Press an entry to open the e mail An update of the PO box can be made via the following icon An icon appears in the status bar which indicates that a new e mail has arrived From Mail de abb com be Mail 3 X XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXX 3 Press an entry to open the e mail 4 Answer e mails direct via voice or image messages Operating Instructions 1473 1 8041 37 Operating Instructions Busch ComfortTouch Operation 5 Touch the respective icon in the bottom bar The functions Image message or Voice messages are opened see sections Image message or Voice message The receivers are selected automatically O Note E mails cannot be deleted in the Busch ComfortTouch Operating Instructions 1473 1 8041 38 Operating Instructions Busch ComfortTouch Operation 5 3 7 Feed Reader With the Feed Reader you can display and read up to ten News feeds in compact form directly on the Busch ComfortTou
49. ng Instructions 1473 1 8041 70 Operating Instructions Busch ComfortTouch Operation 5 3 23 Room temperature controller The Busch ComfortTouch includes a local room temperature controller in the device Further the temperature of various rooms can be controlled centrally by the device i e only one actual temperature needs to be available from the various rooms e g an external temperature sensor and the Busch ComfortTouch can then control the temperature The control of external temperature controllers and fan control according to requirements is also possible via the Busch ComfortTouch O L Note The local temperature controller on the Busch ComfortTouch is opened via the status bar 1 An external room temperature controller 2 is opened via the button of the control element The status bar indicates the actual or set point temperature of the room Also the set operating mode of the local room temperature controller is displayed via different icons With a press on the temperature the local room temperature controller opens The control element of an external room temperature controller can for example display the actual or set point temperature of the room which is regulated by the external room temperature controller The control element can also display the actual operating mode and the mode e g heating With a press on the control element the external room temperature controller opens The op
50. ons via an infrared remote control Fault and alarm messages Displaying and acknowledgement of faults Access control Locking individual pages with password protection File browser Administering external storage media and network shares Mobile access Remotely controlling the Busch ComfortTouch via MobileApp Camera module Use in various applications e g door communication Control elements Basic functions of switching dimming blinds value scenes RTC and measured values All conventional functions in building automation can be controlled and have their status displayed No directly visible application with an operating page The setting is made by the electrical installer via the project planning software The activation is fundamental in part for other applications Operating Instructions 1473 1 8041 Operating Instructions Busch ComfortTouch Product overview 4 3 Device setup 1 Fig 1 Overview of devices 1 Design bar 2 Colour touchdisplay 3 Camera 4 SlotforSDcard 5 Reset button 6 Slot for USB stick Caution Risk of damaging the device due to touching The USB connection contains many sensitive contacts They must not be touched directly O Note Some USB sticks which do not correspond to the general specification may not be recognised The Busch ComfortTouch has a Audio out output via which active loudspeakers can
51. r can call up so called scenes or sequences In scenes several actions can be combined into one so that the user can create for instance certain lighting scenes with just one press of the button several dimming actions Sequences processes are a special form of scenes Not all grouped actions are started simultaneously in one sequence such as in a scene but one after the other in a predefined order Control element Status Scene Scene can be called up Scene is running Scene Function The Scene control element has a push button for calling up a scene Changes to the scene are indicated by an icon and can be stored This is done with a long press of the push button A progress bar is displayed An icon is displayed after the successful storage Note The scene to be called up must be assigned appropriately in the project planning software of the Busch ComfortTouch Please contact your electrical installer who will set up the Busch ComfortTouch for you individually and according to your wishes Scene List Scene can be called up lt Scenel gt Scene selection lt Scenel gt lt Scene1 gt Scene is running lt Scenel gt The Scene List control element has a pop up button for calling up a list with different scenes The list closes automatically after a few seconds if no selection has been made The scene must be selected in the list The scene is then star
52. r entry options in the Busch ComfortTouch 5 2 4 Swiping motions scrolling Scrolling is carried out with swiping motions of the fingers on the touchdisplay This allows the navigation bar to be shifted to the left or right so that all elements become accessible gt Fig 7 Moving the navigation bar with swiping motion Operating Instructions 1473 1 8041 27 Operating Instructions Busch ComfortTouch Operation 5 3 Explanation of functions 5 3 1 Page types The functions are called up and executed via the start page and the operating and application pages These types of pages are briefly explained in the following Start page The Busch ComfortTouch includes a start page welcome page which is displayed to the user after a certain time interval or after returning from the screensaver It thus represents the face of the Busch ComfortTouch and serves as an orientation point The start page is the starting point of any navigation Access to the start page is always provided on the left side of the navigation bar The start page of the Busch ComfortTouch plays another important role Here functions that are especially useful for the user can be positioned You can for instance add additional room lights and blinds to the start page in which the Busch ComfortTouch is located The user then has direct access to these functions To integrate such functions of building control into the start page
53. rated speaker can for example provide acoustic feedback to operations be used as an alarm clock or to signal alarms and fault messages and can also be used for playing back stored audio files The Busch ComfortTouch has a USB connection USB 2 0 and a slot for a multimedia card SD card SD SDHC and Micro SD SDHC with the use of a suitable adapter The design of the Busch ComfortTouch allows the connection to networks via LAN or WLAN Access to KNX is also possible by means of the optional connection of twisted pair modules or via the appropriate IP KNX router And the device can additionally serve as gateway between IP networks and KNX networks Operating Instructions 1473 1 8041 Operating Instructions Busch Comfort Touch Product overview 4 2 Function overview The following table provides an overview of the functions of the Busch ComfortTouch O Note The overview shows all the functions the Busch ComfortTouch offers However many functions are are available only when the project planning software of the Busch ComfortTouch has been appropriately activated Please contact your electrical installer who will set up the Busch ComfortTouch for you individually according to your wishes Function group Function Description Entertainment Multimedia Media Player Replay of includes Web Radio and Web TV Audio and video data Internet Radio Streams Internet TV Streams
54. ravagance Scenes Operating Instructions 1473 1 8041 10 Operating Instructions Busch ComfortTouch Operation 5 1 2 Basic setup of the monitor The functions available in the Busch ComfortTouch depend on their individual installation This means that also the display image of the operating page and the naming of the functions vary from Busch ComfortTouch to Busch ComfortTouch However the basic structure always remains the same Scene Blinds g Present Absent fi 1 Title 2 Operating surface 3 Navigation bar 4 Status bar Element Description Title pages etc 1 Specification of page or directory Control button pages 2 This is set up individually for you Navigation bar 3 Contains a menu that is tailored to your apartment Status bar 4 Displays information about your Busch ComfortTouch with the aid of icons Operating Instructions 1473 1 8041 11 Operating Instructions Busch ComfortTouch Operation 5 1 3 Navigation bar Fig 3 Navigation bar example The navigation bar is used exclusively for navigation in a Busch ComfortTouch An exception are links to the start page which also provides quick access to certain pages in the navigation bar Each operating or application page is represented by an access in the navigation bar This means that each access on the navigation bar stands for exactly one page Or conversely each access to the navigation
55. rol elements 3 Press Scene editor to adjust the scene Select an entry for this i Scenes And Sequences The overview shows components functions of the selected scene or the sequence These components can be changed to a limited extent The adjustments that can be made are shown on the right 4 Press the following icon to enable you to make adjustments for the entire scene O Note If the start time is changed all the following scenes adjust their start times automatically Insert Function Delete All Switch Lamp 1 Switch Lamp 2 Scenes And Sequences 5 In this view you can delete individual functions Operating Instructions 1473 1 8041 69 Operating Instructions Busch ComfortTouch Operation 6 For this select the function and press the cross Press the following icon to confirm the adjustment All functions can also be deleted In addition the sequence can be changed with the arrows With the right arrow icon you go back 7 Additional components functions can also be added Press Insert function Set a tick at the desired function and press the following icon to confirm the adjustment i Scenes And Sequences With the right top arrow icon you go back Scenes And Saquanceas On the scene overview page the adjustments must then be programmed 8 Todo this press Programming The scene can then be played sequence see the figure above Operati
56. ructions Busch ComfortTouch Special forms bubble display For the room view most control elements can also be used as Bubble display Operation is then similar to that described above Non adaptable control elements These are control elements that are fixed according to the system and therefore cannot be adapted Volume control Control element The controller for the System volume is opened via the status bar of the start page Controllers for Applications are each opened via the status bar of the application page These always contain also the controllers for the system volume Status Example System volume system Volume ao System Volume we Special case Media volume With this it can be selected whether the setting refers to the Busch ComfortTouch and or to connected loudspeakers devices Operation Function The controller for the volume appears with a long press on the loudspeaker icon in the status bar The volume is adjusted by moving the slider With a brief press on the loudspeaker icon on the controller the respective volume can be set on mute The volume can be activated again in reverse Operating Instructions 1473 1 8041 26 Operating Instructions Busch ComfortTouch Operation 5 2 3 Entries Appropriate entry options are always offered in the Busch ComfortTouch when entries have to made for the execution of functions Examples fo
57. ructions Busch ComfortTouch Operation 5 3 25 Import and export of files The Busch ComfortTouch contains a simple import and export function for files This function is started via System gt Import Export The export function is described in the following 1 Select the storage medium on which the file is to be saved 2 Select the directory on the storage medium 3 Press the Save button Operating Instructions 1473 1 8041 77 Operating Instructions Busch ComfortTouch Operation 5 3 26 System settings Some system settings can also be made directly on the Busch ComfortTouch They are called up via the System icon in the navigation bar of the Busch ComfortTouch System settings The following system settings are possible depending on the project planning status additional settings are available System settings Date and time Description Formats date time and time zones Screen Screen brightness Network settings Network type IP settings and WLAN network Settings on the Busch ComfortTouch Basic settings separators first day of the week Camera setting Attention This settings is made by the electrical installer Dialog settings signal tones and messages Temperature settings temperature unit and internal temperature offset User settings system language user language tone when pressing a button Screen saver Runnin
58. so displayed in the status bar If the time has run down to 10 seconds the expired time also appears in the camera image see the following figure Operating Instructions 1473 1 8041 65 Operating Instructions Busch ComfortTouch Operation 5 3 20 Fault and alarm messages The Busch ComfortTouch offers protection and information during malfunction or interference Message contacts sensors and their proper function can be monitored The message issued in the event of a malfunction or notification can be set individually The following can be selected Alarm tone E mail Scene for information or prevention Via Fault and alarm messages the user can see which messages have appeared on the Busch ComfortTouch He can additionally use this function to acknowledge the messages to export or delete them Water 1 Floor Alarm Settings Fault and Alarm Messaging 1 Press the Fault and alarm messages icon in the navigation bar to access the function By inserting a tick in Settings you can assign to the individual sensors how the information is to be provided Several information paths can be selected together 2 Press Last message to view all the unconfirmed messages Here the messages can be confirmed Via Tool icon E you access the next overview Here the messages can be exported or deleted With the arrow icon you go back 3 Press Old message to view all the confirmed messages V
59. t never be used outdoors or in bathroom areas Do not push objects through the openings in the device Maintenance and repair work must only be performed by authorized electricians Operating Instructions 1473 1 8041 4 Operating Instructions Busch ComfortTouch Environment 2 3 Liability and warranty Improper use and non observance of this manual excludes the liability of the manufacturer for the damages caused It voids the warranty of the manufacturer 3 Environment Consider the protection of the environment Used electric and electronic devices must not be disposed of with domestic waste The device contains valuable raw materials which can be recycled Therefore dispose of the device at the appropriate collecting depot All packaging materials and devices bear the markings and test seals for proper disposal Always dispose of the packaging material and electric devices and their components via the authorized collecting depots and disposal companies The products meet the legal requirements in particular the laws governing electronic and electrical devices and the REACH ordinance EU Directive 2002 96 EC WEEE and 2002 95 EC RoHS EU REACH ordinance and law for the implementation of the ordinance EC No 1907 2006 Operating Instructions 1473 1 8041 5 Operating Instructions Busch ComfortTouch Product overview 4 Product overview 4 1 Product description Busch ComfortTouch are high qu
60. ted via the push button Changes to the scene are indicated by an icon and can be stored This is done with a long press of the push button A progress bar is displayed An icon is displayed after the successful storage Note The scenes must be assigned appropriately in the project planning software of the Busch ComfortTouch Please contact your electrical installer who will set up the Busch ComfortTouch for you individually and according to your wishes Operating Instructions 1473 1 8041 21 Operating Instructions Busch ComfortTouch Control element Sequences Process with influence from the user Status Scene can be called up Fo Sequence is running animation on left push button Sequence Fo The sequence was stopped and can be started again with the right push button start from the position it was stopped see right push button Sequence Operation Function The Sequences control element has a push button on the left and the right On the left the user can start or stop a sequence The left button is used to start or pause a sequence The right button is used to pause and to restart a sequence the process continuous from the point it was stopped Changes to the sequence are indicated by an icon and can be stored This is done with a long press of the left push button A progress bar is displayed An icon is displayed after the successful storage Note The s
61. the icon a selection with Disarm and Open alarm control unit is displayed This icon indicates that the alarm control unit has been disarmed When pressing the icon a selection with Arm and Open alarm control unit is displayed Overview The overview displays the available message circuits By setting a tick under Monitored you can specify the message circuits are armed when setting the alarm The access code is required when setting the alarm This can be entered via the numbers keyboard which appears The access code can also be changed first the request for the old access code gt OK gt then new entry gt OK Operating Instructions 1473 1 8041 48 Operating Instructions Busch ComfortTouch Operation The sensors e g movement detectors cotained in the message circuits can be seen by touching the entry The individual sensors can be activated deactivated by setting a tick under Monitored With the aid of Ignore it can be specified that an alarm can be set in spite of an existing message By touching the lettering Overview you return to the previous view Circuit one Operating Instructions 1473 1 8041 49 Operating Instructions Busch ComfortTouch Operation 5 3 13 Presence simulation The absence of the resident of the building can be realistically simulated to a great extent via the Busch ComfortTouch for increasing the protection against unauthorised access
62. tting a tick 2 To access the overview of scenes that have been assigned to the weekly program press an entry weekly program in the overview list Light Outside at kaisi Weekly Program The overview displays the scenes that can be played in the weekly program e g sequentially or simultaneously for different devices The scene can be activated deactivated by inserting a tick Additionally the statuses of the validity intervals and start times are displayed Operating Instructions 1473 1 8041 41 Operating Instructions Busch ComfortTouch Operation 3 Select an entry scene to edit it The validity intervals can be specified via Set validity The months can be selected with the arrows 4 Select a validity interval on the right hand side 5 Select the day s in the calendar 6 Also specify the characteristics of the intervals Interval Description characteristics Always The weekly program is continuous there is no assignment to an interval Include Within the marked days The weekly program runs only within the marked days Exclude Outside the marked days The weekly program is suspended during the marked days 7 Press OK You return to the overview of scenes 8 Adjust the start times via Set start time 9 Select the day s in the upper bar Operating Instructions 1473 1 8041 42 Operating Instructions Busch ComfortTouch Operation 10 Set the st
63. uirements with your electrical installer The following requirements must be fulfilled A broadband Internet connection with a transfer rate of at least 100 kbit s in both directions must exist The Internet provider must allow VoIP telephony For the Busch ComfortTouch to be reachable via a conventional call number an SIP account must be obtained from the Internet provider There is also the option of calling a different Busch ComfortTouch in the house This allows the Busch ComfortTouch as intercom system intercom function cf Telephony 1 Press the Telephone icon in the navigation bar to access the function You can dial a number directly or select a stored number via the address book Operating Instructions 1473 1 8041 57 Operating Instructions Busch ComfortTouch Operation Dialling the number directly 1 Enter the number via the numbers keyboard The digit entered last can only be deleted by touching the following sign 2 Touch the following button The connection is being made The time starts to run as soon as the call is answered 3 Terminate the call with the following button Operating Instructions 1473 1 8041 58 Operating Instructions Busch ComfortTouch Operation Dialling a stored number via the address book 1 Touch the entry Address book A list with the stored address entries opens cf Telephony 2 Seta tick at the desired
64. unctions Blue Climate functions Orange Scenes Magenta Other functions Grey Function button push button 3 The function is triggered with a press of the button can also display the status here Device off Status display of device 4 The device is switched on Lettering white bright Function button push button 5 The function is triggered with a press of the button can also display the status here Device on Operating Instructions 1473 1 8041 16 Operating Instructions Busch ComfortTouch Operation Additional basic principles Function buttons of dimming control elements can display different stages of dimming by means of alternating icons e g larger light halo around the icon Default settings of steps e g dimming steps fan speed levels are shown in white bright lettering icons In the following example the default setting for a dimming step is 20 If a selection or setting cannot be made the colour of the lettering icons appears dark In the following example the uppermost setting for dimming has been reached 100 Increased dimming is not possible and that is why Plus and 100 appear in a dark colour Active elements or functions are displayed in white bright lettering icons Operating Instructions 1473 1 8041 17 Operating Instructions Busch ComfortTouch Operation Adjustable control elements Push buttons basic versions which can be ad

Operating Instructions Busch-ComfortTouch® Busch

Contents

Download Pdf Manuals

Related Search

Related Contents

Operating Instructions Busch-ComfortTouch&reg; Busch

Contents

Download Pdf Manuals

Related Search

Related Contents

Operating Instructions Busch-ComfortTouch® Busch