Troubleshooting Tips for the Chip Vac
Contents
1. Corporation 11510 Goldcoast Drive Cincinnati OH USA 45249 1621 513 671 3322 FAX 513 671 3363 E mail techelp exair com Troubleshooting Tips for the Chip Vac IMPORTANT PLEASE READ BEFORE ASSEMBLY 1 For best performance the Chip Vac should be used with shop air that is 80 to 100 PSIG The Chip Vac requires 40 SCFM 1132 SLPM at 80 PSIG 5 5 BAR 2 Pressure must be measured at the compressed air inlet of the Chip Vac Large pressure drops are possible across quick connect fittings clogged filters undersized fittings long lengths of compressed air hose etc To properly measure supply pressure While in operation read the pressure gauge installed on the Chip Vac This is the actual pressure into the Chip Vac The Chip Vac will not perform as well when gauge pressure is lower than 80 PSIG 5 5 BAR 3 If gauge pressure is less than 80 PSIG 5 5 BAR check items mentioned in step 2 for possible airflow restrictions 4 If pressure measures 80 PSIG 5 5 BAR or more and performance still is not satisfactory contact an Application Engineer for assistance at 1 800 903 9247 or 513 671 3322 outside the U S and Canada Suction Pressure Gauge Compressed lt 4 Air Supply Outlet to Drum x 2007 EXAIR Corporation LIT 6502 If you have any questions or problems please contact Eputec Haidenbucherstr 1 86916 Kaufering Germany Telephone 49 8191 6 57 24 90 Fax 49 8191 6 57 24 91 E mail i2. nfo eputec de Internet www eputec de 2007 EXAIR Corporation
Download Pdf Manuals
Related Search