Weatherproof telephone Operating instructions
Contents
1. eet Ko Su aia a a tat 8 Setdlalling procedure dica 9 Enter prefix for automatic pause rr 9 Delete prefix for automatic pause a r 9 Program the pause following prefix a nennen 10 Program the Enquiry Key flash nn 10 Restore to as delivered condition 10 Change Personal Identification Number 11 Signalling tones during programming 11 General information esses 12 e e E OR EE Meere 12 Care and maintenance e ican a 12 Warnings and security information 12 Technical Specifications aii 13 General operation 1 The InduTel can be operated in the analogue public telephone network and connected to analogue terminals of branch exchanges 2 The telephone has a receiver accommodation with a magnetic contact as hook switch To disconnect an existing connection the receiver must be replaced For disconnecting an existing connection all you need to do is press the disconnect key on the keypad 3 When programming the settings the rece2. Lift the receiver Press the and keys simultaneously Press key 6 the set melody is played back Set the desired melody using the keys 1 to 9 Press the cw key to store the selected melody Replace the receiver A DORIOA Set dialling procedure Liftthe receiver Press the and keys simultaneously Press key 9 Enter the code for the desired dialling procedure Press the 8H key to store the selected dialling procedure Replace the receiver Code Key Dialling procedure Comment 1 Dual tone multifrequency DTMF The DTMF tone is being generated unlimited tone duration as long as the associated key is being pressed 2 Dual tone multifrequency DTMF As delivered condition tone duration 90 ms 1 2 3 4 Enter prefix for automatic pause Lift the receiver Press the and keys simultaneously Press key 0 Enter the pfefix a digit or the R key and not allowed Press the key to store the entered AKZ automatic pause Replace the receiver AD Hom Delete prefix for automatic pause Liftthe receiver Press the and keys simultaneously Press key O Press the key Press the ME key to delete Replace the receiver 9 A gt 0009 Program the pause following the prefix Liftthe receiver Press the and keys simultaneously Press key 1 Press a key from 1 to 5 the key number corresponds to the duration in
3. Standards and regulation Conformity to the following standards and regulations FCC Part 15 FCC PART 68 TIA 968 B UL50 UL 60950 1 UL 60950 22 CSA C 22 2 No 60950 1 Installation and connectability To provide flexibility and potential for growth telephones are easily and economically connected to any telephone network by standard wiring and parts Voice quality is unaffected when phones are connected within 15 00 feet 4 600 meters of a main telephone switch accepting single line telephones Meeting safety standards may require use of special wiring conduits or other consideration Telephones are tone pulse switchable Initial setting is to tone prior to delivery unless requested otherwise In service switching may require technical assistance 14 Subject to alterations Or errors FUNKE HUSTER FERNSIG FHF Funke Huster Fernsig GmbH Gewerbeallee 15 19 D 45478 M lheim an der Ruhr Phone 49 208 82 68 0 Fax 49 208 82 68 286 http www fhf de e mail info fhf de
4. Weatherproof telephone INDUTEL MOUELE e UL us Operating instructions FUNKE HUSTER FERNSIG FHF 9605 2 10 11 Note Please read the operating manual carefully before installing the device Please check the contents of the box for completeness Table of Contents General operation sse enne 3 Customer Information sse 3 As delivered condition ssssseeeeennee 5 BOX CONTENTS mE h 5 Telephone presets pus ts 5 Mounting and installing nana 5 Wall MOI esr crc 5 Operation and programming 7 CET 7 Operati u uuu delet tao een eine 7 Occupy line Make answer a Call ocooocccoccccccnccnconocononcnnoncncnncnnncnnoncnnnnnnnnos 7 Volume Vete 7 NIAC el ustna suasana dea 7 Eastnumbertedlalia on uka kuu Ta lies ss aaa 7 DISCOMMEGE wenns PHI akan Sipas TP si aie 7 Enquiry call dual tone multifrequency only 7 Programming er 8 Allow settings modifications nun enenennenennnennnennen 8 Restrict settings modifications ann ee eed De ole aud aces db n e da e e ire d 8 Adjust ringing VOLUME susto aaa 8 Adjust the ringing melody
5. e the number of devices that may be connected to a telephone line Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call In most but not all areas the sum of RENs should not exceed five 5 0 To be certain of the number of devices that may be connected to a line as determined by the total REN contact the local telephone company The REN is part of the product identifier that has the format US AAEQZZTXXXX The digits represented by are the REN without a decimal point e g 03 is a REN of 0 3 If this telephone causes harm to the telephone network the telephone company will notify you in advance that temporary discontinuance of service may be required Bit if advance notice isn t practical the telephone company will notify the customer as soon as possible Also you will be advised of your right to file a complaint with the FCC if you believe it is necessary The telephone company may make changes in its facilities equipment operations or procedures that could effect the operation of the device If it happens the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service If trouble is experienced with this telephone for repair or warranty information please contact FHF Safety Products Inc Phone 1 732 248 1567 If the device is causing harm to the telephone network the telephone company may request that you disco
6. iver must be off the hook You enter programming mode by simultaneously pressing the asterisk and the pound sign key 4 f a procedure has been completed successfully you will hear an acknowledgement signal An error tone informs you of any operating mistakes 5 Should more than 2 minutes pass before you start dialling the exchange may cut off the power supply The dial tone can no longer be heard In this case you should put the receiver back on the hook and wait approximately 2 seconds before you lift it again Programming sessions that have been started but have not been completed must be repeated 6 When you receive a call the InduTel rings with the volume and melody you have selected 7 Entering your personal identification number PIN you may partly or completely restrict functions and settings Forgetting your PIN can be compared to losing a key If you have forgotten your PIN please contact our technical support service Customer Information This device has been tested and found to comply with the limits for a class B digital device pursuant to part 15 of the FCC rules This device complies with part 68 of the FCC rules and the requirements adopted by the ACTA On the right side of this device is a label that contains among other information a product identifier in the format US AAEQ TXXXX If requested this number must be provided to the telephone company The REN Ringer Equivalence Number is used to determin
7. ly performed procedure Error tone 4 short tones An error occurred within a procedure The procedure is cancelled PIN tone 1 short tone sequence Prompt to enter the PIN Optical call indication only INDUTEL LED In case of an incomming call the handset holder starts blinking 11 General information Service You have bought a modern FHF product subject to meticulous quality control If any questions regarding the telephone or malfunctions should occur even after the guarantee has expired please contact FHF Please have the type denomination and product number to be found on the nameplate ready Care and maintenance The telephone is maintenance free Still if the operating area is highly contaminated by dust fat oil etc the device should be cleaned from time to time Use a moist cloth to dust off the receiver and the device Warning Never use sharp objects for cleaning Do not use other polishing or abrasive substances Movable parts of the housing may NOT be covered by lubricants like oil grease etc Waste disposal The device may be completely recycled as electronic waste Upon disassembling the plastic metal and electronic components must be disposed of separately In every single case the local requirements disposal must be observed Warnings and security information This device is a weatherproof telephone especially designed for use in rugged industrial environments Please note the following
8. ng on the mounting surface Remove the keypad plate with the handset bring cable into the enclosure through the conduit entrance and attach individual wires from the exchange and connect it with terminal TIP RING TIP RING are not polarity sensitive If a conduit hub is used ensure itis to the ground stud Plug the ribbon cable onto the pin contact strip of the keypad plate Tighten the keypad plate using four screws CAUTION EQUIPMENT DAMAGE To ensure trouble free operation of the fixture ensure that the conduit has been secured to 200 Ibf in 22 Nm Do not over tighten as it may cause the enclosure to fracture Operation and programming Controls 9 eo ELO 9 0 8 Number keys Operation Occupy line Make answer a call When you pick up the receiver you may answer a call or dial a business contact Volume control Press the lt gt key to increase the receiver volume during a call Pressing the X key one more time reduces the volume to the previous level Make a call Dial the desired number by using the number keys When using the dialling procedure Pulse dialling the asterisk and pound sign keys have no function Last number redial By pressing the last number redial key the last entered number is automatically dialled when you lift the receiver Disconnect To end a call and start a new call immediately afterwards there is no need to put the receiver down ju
9. nnect the device until the problem is resolved If you have specially wired alarm equipment connected to the telephone line ensure the installation of this telephone does not disable your alarm equipment If you have questions about what will disable alarm equipment consult your telephone company or a qualified installer This telephone must not be used on party lines This telephone is of a type that is not intended to be repair This telephone is hearing aid compatible Product label INDUTEL US 6SHTE17B 64501 Product label INDUTEL LED US 65 29 64506 As delivered condition Telephone presetting Dialling procedure Dual tone multifrequency DTMF signal duration 90 ms Signalling key function R key Flash 120 ms Prefix automatic pause none Pause following prefix 3 seconds Last number redial memory Empty Restrictions Programming restricted Volume control 12 dB PIN 0000 Ringing melody 7 Ringing volume 6 max Receiver volume 1 min default value Using the programming options you may reset this as delivered condition at any time The PIN will not be altered by resetting Mounting and connection Note The mounting surface must be able to support 5 Ibs The device must be installed on a plane surface only in vertical operating position For mounting dimensions see the dimension illustration Mount the telephone on the wall using four 1 4 inches screws or 14 wood screw of the appropriate length dependi
10. perating position 10 This product is subject to technical improvements without prior notice 11 CAUTION To reduce the risk of fire use only No 26 AWG or larger e g 24 AWG UL Listed or CSA Certified Telecommunication Line Cord 12 This equipment is suitable for use in non harzardous location only 12 Technical Specifications Examination certificate Connection data Supply voltage Supply current Ringing type REN Enquiry key flash Dialling procedure DTMF PD Ringing volume Housing Height x Width x Depth Weight Operating utilization position Receiver Mouthpiece Receiver inset Connections Terminal marking Ambient operating temp Transport and storage temp Enviromental Rating Wiring access E337081 24 66 Vdc 19 100 mA B 1 7 for INDUTEL 2 9 for INDUTEL LED only for DTMF 80 ms 120 ms 600 ms Frequencies according to ITU T Q 23 Tone duration unlimited or 90 ms Pulse Pause ratio 1 5 1 60 40 ms or 2 1 66 7 33 3 ms when the housing cover is open Approx 90 dB A at 1 m distance when the housing cover is closed Approx 65 dB A at 1 m distance 13 x 9 33 4 33 in 330 x 237 x 110 mm 5 Ib 2 3 kg Vertical wall mounting Electret foil microphone dynamic receiver hearing aid compatible Single or multiwired up to AWG 14 2 5 mm TIP RING 40 F 131 F 40 F 158 F 40 C 55 C 40 C 70 C Type UL50 1 2 NPT conduit Hub 13
11. seconds Press the B key to store the entered duration of the pause Replace the receiver a DECO whe Program the Enquiry Key flash time For dual tone multifrequency only Pressing the enquiry key briefly interrupts the loop to the private branch exchange flash to enable an enquiry to another private branch connection The flash time is programmable Lift the receiver Press the and keys simultaneously Press key 8 Enter the code for the desired flash time Press the amp key to store the selected flash time Replace the receiver Code Key Flash time A 80 ms 1 _ O 2 120 ms as delivered condition 3 600 ms o u HE UO Restore to as delivered condition Liftthe receiver Press the and keys simultaneously Press key 3 Press the key to reset the as delivered condition Replace the receiver Upon Resetting to the as delivered condition the PIN is not reset to 0000 10 Change Personal Identification Number PIN H rer abnehmen Lift the receiver Press the and keys simultaneously Press the and 2 keys consecutively Enter the old PIN Enter new PIN Repeat new PIN Press the key to store the new PIN Replace the receiver 4 GD GD D Soap HnewP HE newPIN 9 lt Signalling tones during programming Tone Number Significance Acknowledgement tone 1 long tone Completion of a correct
12. st press the disconnect key When disconnecting the old call ends and after a short while you hear the dial tone You may now enter the number for the new call Enquiry call dual tone multifrequency only If the telephone is connected to a private branch you may press the enquiry key R in order to establish a connection with another subscriber who is also connected to the private branch By pressing this key a second time you will be connected with the first subscriber again Programming In order to program the telephone you have to allow modifications of the settings Allow settings modifications Liftthe receiver Press the and keys simultaneously Press the and 0 keys consecutively Enter PIN in the as delivered condition 0000 Press the G key to allow settings modifications Replace the receiver A amp O Een e Restrict settings modifications Liftthe receiver Press the and keys simultaneously Press the and 1 keys consecutively Enter the PIN Press the NM key to disable settings modifications Replace the receiver OOOH amp Adjust ringing volume Press the and keys simultaneously Press key 5 the ringing sound is played back with the selected volume setting Set the desired volume using the keys 1 to 6 Press the key to store the selected volume Replace the receiver e HHE 4 6 9 Adjust the ringing melody
13. warnings and security information 1 The typerating 3R can only be guaranteed if the housing is closed 2 The telephone is a Protective Class device and may only be connected to and operated at the voltage it was designed for Make sure the connections are in perfect order 3 The telephone may only be operated at the given ambient conditions see also under Technical Specifications Adverse ambient conditions as for instance too high or too low ambient temperatures are not allowed due to increased risk of an electronic parts breakdown 4 Make sure the telephone the handset cable etc are not damaged If the telephone is damaged it may not be operated 5 While the telephone is in operation please follow all relevant legal and professional regulations the accident prevention regulations of the Employers Liability Insurance Association and laws and regulations governing the use and connection of electric devices 6 In case of repairs use only original spare parts Replace such parts according to professional standards Other spare parts may cause damage The guarantee is rendered invalid 7 Before the telephone is repaired or replaced it must be disconnected from the power supply If the maintenance or repair of a live device cannot be avoided this must be done by authorised personnel only 8 Do not damage the covers keeping the housing tight when mounting or demounting the device 9 Take into consideration the required o
Download Pdf Manuals
Related Search