Operating Instructions helifer lifting gears - Rhein
Contents
1. Operating Instructions helifer lifting gears Gear unit mounting The gear units are intended for mounting in dry locations The shafts to be coupled should be aligned as accurately as possible The couplings used must be capable of compensating for any remaining shaft misalignment The maximum lifting force mentioned in the addendum of the catalogue and their allowable direction are to be kept in mind Couplings may not be mounted by tapping or hammering into position As the gear unit housings tramsmit reaction forces it is important to ensure that the surfaces bolted together are suitably flat and rigid This will ensure firm attachment betweem housing and support Startup Normally the gear units are filled at our works with adequate quantities of lubricant and then sealed so as to be oil tight They are capable of functioning up to maximum temperature of 100 C Before operation the spindle has to be lubricated by fat for instance with RENOLIT FWA 160 by Fuchs Maintenance Normally the gear unit is filled with Klibersynth GH6 320 a synthetic lubricating oil with high anti friction and ageing resistant properties of type PG LP ISO VG 320 in accordance with DIN 51502 which achieves extremely long service life in the gear unit After a period of 5 years the lubricating oil should be renewed The interior of the gear unit should then be flushed with Kliibersynth GH6 32 completely drained and refilled with the quan2. tity of the same lubricant specified in the component list The axial bearings are to be cleaned and to be lubricated by Fuchs RENOLIT FWA 160 of type K2N 20 in accordance with DIN 51502 Standard PG LP ISO VG 320 is also fulfilled by the following oils Mobil Glygoyle HE 320 Shell Tivela S 320 The gear unit should be inspected regularly to permit early detection of leaks contamination and any conspicuous noises It is to survey that the spindle screw is sufficiently lubricated When inspecting after a period af 5 years the tooth and spindle backlash in particular should be checked in order to determine any wear that may have occured Warranty RHEIN GETRIEBE GmbH warrants for its products in accordance with the General Conditions of the VDMA for Supply of Machines for the Domestic Market RHEIN GETRIEBE GmbH Postfach 1554 D 40640 Meerbusch phone 02132 99698 0 fax 02132 8351 adress Gr nstra e 34 D 40667 Meerbusch Biiderich rech042 doc 97
Download Pdf Manuals
Related Search