Operating instructions for MPX high
Contents
1. PowerBox Systems World Leaders in RC Power Supply Systems Saftey Clip Operating instructions for MPX high current plugs and sockets Registered Design No DE 202 169 33 2 PowerBox Systems The Safety Clip Dear Customer We are delighted that you have recognised the advantages of our security clip for the renowned and popular Multiplex high current plugs and sockets Please use only genuine MPX connectors Assembled multi part sockets are available from other manufacturers but these have a tendency to come apart when disconnected The MPX connector system was introduced some time ago and our Security Clip provides a method of locking the connectors together securely whilst still allowing disconnection at any time The MPX connector system has proved extremely successful over the full range of modelling applications including electric flight model cars and boats wing mounted servo connectors all types of battery and in our case the production of battery backers However many modellers have found that this connector requires a method of locking especially if the model is subject to severe vibration Common methods are a piece of insulating tape or a cable tie The drawback of these methods is that they always have to be re fitted or replaced after the plug and socket have been discon nected The Security Clip which we have developed can easily be attached glued to the high current plug PowerBox S2. ystems The Safety Clip The first step is to solder the high current plug to the cable please note the terms plug and socket always refer to the metal contacts Now simply slide the Security Clip over the plug to a point where about 3 mm of the green plug housing is exposed The hole in the Security Clip should be located on the en closed face of the high current plug You can now apply a small drop of low viscosity thin cyano acrylate glue to the still exposed green surface Don t apply too much glue Push the Security Clip fully onto the plug when correctly positioned the Clip should end flush with the underside of the plug Excess glue can easily be wiped off the surface Now wait 3 or 4 minutes for the adhesive to cure fully and the job is done Order No 9100 pack of 6 Donauw rth November 2002 PowerBox Systems Modellbau Deutsch Hindenburgstra e 33 86609 Donauworth Tel 49 0906 22559 Fax 49 0906 22459 info PowerBox Systems com www PowerBox Systems com
Download Pdf Manuals
Related Search