Operating instructions of Mistral 500 (700)
Contents
1. So ee Holtorff Windhundrennmaschinen Operating instructions of Mistral 500 700 Contents motors rope guide electronic control brake 500 700 m line with 1mm diameter 60 kg braking resistance 10m line with 1mm diameter 16 kg braking resistance serves as security line 1 jumper cables red black is installed 1 lever is installed 5 rolls and 15 fixing nails 1 rubber mallet Please read the operating instructions carefully before applying the machine to avoid injuries to yourself other people dogs or damages to the machine How to lay out the rabbit l Put the case in front or next to your car take the rolls the rubber mallet the nails the cable and the rabbit Put the line through the special eye of the rope guide and through the window of the case Attach the hunting object rabbit skin or similar things with max weight 200g at the end of the thin line The course Go straight ahead 100m with the hunting object the rubber mallet the nails and the rolls and attach the Ist roll with 3 nails to the meadow and place the line on the one side of the roll Repeat the action of a with the next rolls and complete the course nearby your car Attention No crossing of the line the angle of the line shall not be under 60 to avoid a crossing of the running line To activate the brake unlock the handle draw near the handle lightly and let it go Start of the race Connect the jumper cables with the 122. mation To avoid the accidental or unauthorized use of the machine while laying out the line see to it that the machine is not linked up with the battery For economical use of the battery it is recomendable to let the motor run during the cursing Start ren Pacours
3. volt battery of your car Attention Connect the red cable with the positive pole and black cable with the negative pole of the battery A wrong poling causes damage to the machine and the line Please see to it that nobody touches the hunting object or the line and that nobody stands in the immediate vicinity By pulling the lever to the pipe the machine gets activated When the hunting object is about 30m away you can set the dogs free 4 Speed adjustment To regulate the velocity pull the lever or open it lightly By opening the lever completely the rabbit will be stopped By pulling the lever it will start again 5 Ending the race When the hunting object is only 20m away from the machine release the lever to end the race The rabbit will be stopped and the dogs can catch it Attention don t start the machine again as long as the dogs are straining at the rabbit or are in reach of the line serious danger of injury Capture the dogs and bring them to a secure place 6 Rolling up the rest of the line Pull the rabbit as described in 7 only a few meters away from the machine Attention Happens very fast Stay away from the line or the rabbit Keep an eye on other people standing around Don t pull the hunting object into the machine but for the last three meters turn the cylinder by hand with the lever in the middle position until the rabbit 1s near the machine Security infor
Download Pdf Manuals
Related Search