Operating Instructions for end users Access video panel
Contents
1. J ECO mode By tapping the ECO symbol you send the display to the idle status To reac tivate the display tap anywhere on the touchscreen 12 a Start Drop down menu C Call forwarding Switching call forwarding on and off Incoming calls are forwarded to a different indoor device As long as call forwarding is active the relevant symbol appears in the status display In case of call forwarding with time delay forwarding after X seconds incoming calls can still be accepted using your panel within the pro grammed time In case of immediate call forwarding it is not possible to pick up calls at your panel X Ringtone Ring tone on and off Here it is possible to e mute the ring tone e switch the ring tone back on The symbol indicates whether acoustic signalling of door calls and telephone calls is active or has been muted cf Doormatic Switching Doormatic on and off The door release is automatically actuated after pressing the call button either for one specific door or all doors depending on the programming Remarks e The Doormatic function must have been configured in the Access server for it to be capable of being used e The Doormatic function must be manually activated and deactivated e As long as the Doormatic is active the relevant symbol appears in the status display Cameras Door station dW Here all the set up enabled door stations are visible and can be calle2. Please ensure that no moisture ever penetrates the housing Cleaning the display Zs To ensure that you do not initiate a function by mistake or change set tings when cleaning the panel you can disable the touch function for a short period 10 seconds Procedure 1 In the navigation bar tap the Settings symbol 2 Tap the Clean display symbol 3 Clean the device display 4 If cleaning takes longer than the set period tap the Clean display symbol again Reset to as delivered status Resetting the panel to the as deliv ered status will only affect settings which you can change at the panel such as the ring tone volume or dis play settings Programming by the electrical installer will not be lost Procedure 1 In the navigation bar tap the Settings symbol 2 Tap on the reset symbol 3 Tap on OK in order to reset the device to the as delivered status 4 As soon as the process is concluded the menu Settings gt Language appears 5 Please select your language in order to activate the operating mode 19 General information Disposal All electrical and electronic devices must be disposed of separately from the general house waste at the specially provided municipal waste facility Responsible disposal and separate collection of end of life devices help to prevent potential environmental and health hazards and form the basis for the recycling of used elec trical and electronic devices If a pro
3. made of high grade plastic The panel is a system product with a low profile surface mount housing for wall and table top mounting It provides ergonomically designed intuitive user prompting with gesture control Intended application The panel is part of a door commu nication system and may only be used exclusively within this system Siedle does not accept any liability for damage caused as a result of using the equipment for any other than its intended purpose Operating remarks In order to avoid damage to the panel please note the following The touchscreen and the buttons can be damaged by using sharp edged or pointed objects such as ballpoint pens or keys Only ever use your finger to operate the panel When restarting the Access video panel or the Access server the Access video panel is restarted step by step Depending on the system size a complete restart can take sev eral minutes During this period the Access video panel shows various statuses in English The Access video panel is not ready for operation until the start screen is continuously displayed Care instructions Dry aggressive cleaning agents and abrasive detergents can damage the surface Only ever clean your indoor device using a soft damp cloth Please ensure that no moisture ever penetrates the housing Legal notice Photographs of individuals taken without their knowledge may not be published or stored in publicly accessible vid
4. ol English Dansk Fran ais Svenska Italiano Polski Nederlands pyccku Image view Standard screen mode Standard icon view for images and video Full screen mode Large icon view for images and video d Design Light Light user interface Dark Dark user interface Position of menu prompting and navigation bar Left Menu prompting and navigation bar are located on the left hand side Position of menu prompting and navigation bar Right Menu prompting and navigation bar are located on the right hand side ECO mode Call display Speech button flashes to indicate missed calls Idle status The display changes to the idle status after an adjustable period of inactivity or remains continuously active Cleaning the display The touch function is temporarily deactivated for display cleaning System User information User information name call number Device information nformation on the device name call number version net work adapter server IP address Licence information Detailed licence information on the product O Reset Factory setting Resetting to default settings J ECO mode By tapping the ECO symbol you send the display to the idle status DO To reactivate the display tap anywhere on the touchscreen Operation Door call 91 Save picture Taking a picture manually Switch light Triggering t
5. information Disposal 20 Index 21 These operating instructions supple ment are supplemented by e Access video panel product infor mation e Access system manual The relevant current edition is located in the download area on www siedle com Subject to printing errors We reserve modifications depending on technical improvements Safety remarks Electrical voltage Mounting installation and servicing work on electrical devices may only be performed by a suitably qualified electrician Mounting During installation where applicable ensure that the surface is protected from damage Electrostatic charging A PN As a result of electrostatic charging direct contact with the circuit board can result in destruction of the device Direct contact with the circuit board must therefore be avoided Commissioning requirements e The device must be powered via PoE Power over Ethernet IEEE 802 3 af or 802 3 at e To operate an Access video panel an Access server release from ver sion 2 1 is required Access servers with a lower release status must be updated with an upgrade This can give rise to additional costs Installation is described in the Siedle Access System Manual which is sup plied with the server and can also be downloaded from the website Commissioning takes place as described in the quotation Application Access video panel with touchscreen 17 8 cm for the Access system
6. not mistakenly relayed outside Accepting a call Ending a call Using the speech button you can accept an incoming call or terminate an existing call 16 Call Internal call Full screen mode m Large icon view for images and video Reject call If you do not wish to accept an incoming call tap the red receiver symbol If the device belongs to a group the call is retained at the other devices Accepting a call N Tap on the pick up symbol green receiver symbol to accept an incoming call If an internal call is in progress you can accept the call within 120 sec onds after the last ring After accepting the call the speech connection is established During an active call the speech button lights up Microphone off RR Using the microphone silencing function you can mute the microphone in the panel during an active call in order to talk privately to a person in the room Your call partner at the door or the internal user cannot hear your conversation This is indicated by microphone symbol highlighted in a dif ferent colour with the line through Ending a call Tap on the red receiver symbol to end the existing call Accepting a call Ending a call Using the speech button you can accept an incoming call or terminate an existing call 17 Operation Calling a contact There are 2 ways of calling a con tact e Dialling a contact using the start screen e Dial
7. the call button will respond If you have already set the maximum volume only the on the call button will respond The set volume will be adopted for future calls During an existing call e Increasing the volume Press on the call button until the graphic control for the call volume appears and hold down until the call volume has reached the required value e Reducing the volume Press on the call button until the graphic con trol for the call volume appears and hold down until the call volume has reached the required value If there is no active call 1 Open the menu settings gt Audio gt Call volume 2 Using the controller adjust the call volume 3 The set volume will be adopted for future calls Ending a call During an active call the speech button lights up Press the speech button in order to terminate the call Missed calls In the event of missed door calls telephone calls the mouth symbol on the call button flashes provided this function has been set up This signalling function is set using the menu Settings gt ECO mode gt Call display gt Speech button flashes to indicate a missed call Door release button Function Press the door release button The door release is actuated for 3 seconds Using the door release button you can also always actuate the door release from the door from which the last door call came without the need for a preceding call Note In the as delivered stat
8. SSS SIEDLE Operating Instructions for end users Access video panel AVP 870 0 Contents Safety remarks Operation Electrical voltage Door call 16 Electrostatic charging Call Internal call 17 Commissioning requirements Calling a contact 18 Application Intended application Operating remarks Care instructions Legal notice wiwiw iww w w w General information Functional scope Scope of supply Video memory SD card Servicing Product overview Speech button Functions Door release button Function osoloaolu le leleiPe iP Touchscreen Operation Accessing menus Accessing functions Moving tiles Changing pages Start screen oo SIS Is Overview of menus and symbols Menu structure User interface Explanation of symbols Status displays Display symbols Status change Display navigation Navigation bar Start Drop down menu Cameras w Switching Drop down menu Door call images Calls list Settings ECO mode ulu ele I Dialling a contact using he start screen Dialling a contact using the Contacts menu 18 issed calls Callback 18 Selecting a door station 18 Changing the display mode 18 Cleaning the display 18 Reset to as delivered status 19 General
9. d directly These can be assigned names during programming e g entrance door main entrance etc Standard screen mode 30 Standard icon view for images and video Full screen mode Bo Large icon view for images and video 13 Display navigation D Switching CD Drop down menu D All switching functions All available switching functions are displayed CS F Doors For switching functions status displays and signalling functions to be displayed in the categories filters the Access server must have General been programmed configured _ _ Light IN Status display Mail notification system Door call images JX 8 30 Standard screen mode The door call images are displayed in the standard icon view Full screen mode The door call images are displayed in the large icon view List The door call images are displayed as a log entry Delete all images All existing door call images of the user are deleted Delete image The selected door call image is deleted WS G E TIME Bo Calls list Delete all entries All existing entries in the call log are deleted O Settings D Audio Phone volume Call volume adjustable in 5 stages Ringtone volume Ring tone volume adjustable in 5 stages E Display Brightness Brightness adjustable in 5 stages e Language Language selection Deutsch Espa
10. duct bears the symbol of a waste bin with a line through it then it falls under the regulations of European Directive 2002 96 EC Remarks When disposing of your end of life devices and batteries please observe the local waste disposal regulations Details can be obtained from your local authority waste disposal service or the specialist dealer from which you purchased the product g 20 Index Accepting a call 6 16 17 Explanation of symbols 0 Video memory 4 Accepting ending a call 16 17 Functional scope 5 Accessing functions 8 Icon view 5 Accessing menus 8 Idle status 5 All switching functions 4 Intended application 3 Application 3 Language selection 5 Audio 5 Large icon view 13 17 Brightness 5 Legal remarks 3 Call forwarding 11 13 Licence information 5 Call log 9 12 Light switching 14 16 Call volume 6 15 Menu structure user interface 0 Callback 8 Microphone off 16 17 Calling a contact 9 12 18 Missed calls 1 Calls Internal calls 7 Moving tiles 7 Cameras 9 12 13 Navigation bar 2 Care instructions 4 Operating remarks 3 Changing pages start screen 8 Operation 6 Changing the display mode 8 Overview of menus and symbols 10 Cleaning the display 15 18 Performance features 4 Commissioning requirements 3 Position prompting Default setting 5 navigation bar gt Deleting all entries 12 14 Product over
11. ed red Display symbols Status change Status display Off Change of status by e change of the symbol colour e change of the symbol Status display On Switch Off Switch On Switch Off Change of status by changing the colour of the symbol Switch On Status display Contacts green Status display Contacts grey Status display Contacts red Drop down menu Open u ee 1901091 8 0 Drop down menu Close Change of status by changing the symbol Display navigation Navigation bar a Start The Start menu is also the start page of the Access video panel with indi vidual functions created individually using tiles and a drop down menu with the functions Call forwarding ring tone and Doormatic Using the start page you can access the different tiles with control functions and intercom functions which have been set up using the Access server Remark Only those tiles are displayed which have actually been pro grammed for your Access video panel If no functions have been pro grammed you only have access to the drop down menu on the start page q Contacts The Contacts menu contains all the set up enabled contacts Here you can e show contacts sorted according to existing categories filters e dial contacts direct LK Cameras The Cameras menu contains all the set up enabled video door stations Audio door stations are located in t
12. em information Status display S7 Charging 7 N Reset N 8 m All switching functions A ECO mode CO Switching Switching 4D Internal call Audio door M stations External call Switch light o Save picture Switch light 0 Status displays Dal Ringtone Off The symbol indicates that the acoustic signalling of door calls and telephone 4 calls has been silenced Missed calls The symbol indicates that at least one call has been missed The call log L opens when you tap on this symbol The missed calls remain highlighted in a different colour until the call log is opened C Call forwarding On The symbol indicates that the Call forwarding function has been switched on All user calls are forwarded to the dialled destination directly or after a set time forwarding after X seconds It is only possible to accept a user call once the call forwarding function has been deactivated a Doormatic On The symbol indicates that the Doormatic function has been switched on The function must have been configured in the Access server The door release is automatically actuated after pressing the call button either for one specific door or all doors depending on the programming Status display Contacts The symbol is a dot located next to each contact door in the Contacts and Cameras menus The symbol indicates whether a contact door is free green unattainable grey or engag
13. eo memory facilities ndividuals who have been photographed without their nowledge are entitled to request hat pictures be deleted based on he right of persons to their own ikeness Never store pictures of persons you do not know in social networks or send them by email o others public groups This will infringe their personal rights f stored images are used as part of private criminal law proceedings or in a police investigation this requires prior clarification with a lawyer or he responsible police authority General information Functional scope With the functions calling speech vision door release light remote switching and call silencing Performance features e Individual crafted design concept offering a wide choice of varied fea tures and finishes e Display offers graphic scope for individual operation e 17 8 cm 7 touchscreen resolu tion 800 x 480 Pixel e Brilliant image reproduction e Excellent audio quality dual loud speaker technology e Input for storey call e Output freely programmable e Additional inputs and outputs with Access input output accessory AZIO 870 e Call differentiation between door calls storey calls and internal calls e Switching functions e Video memory function e Can be used with table top acces sory AZTVP 870 as a table top device e Update capability using the Access server Scope of supply e AVP 870 Base plate and housing with c
14. he Contacts menu Here you can e access the life camera image of a door station dial the video door station direct e change the video icon view standard icon view large icon view Switching 00 In the Switching menu you have access to all set up enabled switching functions and signalling functions provided these have been configured in the Access server Here the switching functions status displays and signalling functions e Can be shown sorted according to the existing categories filters e Can be executed or displayed directly IF Door call images In the Door call images menu you will find door call images taken by all set up enabled door call stations which you can view Here you can e view and evaluate the images according to date and time e delete individual images e delete all images e change the depiction of entries in the Door call images menu list view without preview large icon view standard icon view Calls list In the call log menu you will find all missed and rejected calls as a log entry Here you can e evaluate all missed calls according to date and time e delete all entries e return a missed call directly by tapping the call log entry so Settings In the Settings menu e carry out basic settings language tone and display settings ECO mode e obtain information about your device e activate the cleaning mode and e reset the device to the as delivered status
15. he light relay I Door release Triggering the door release Bel Full screen mode Large icon view for images and video Reject call If you do not wish to accept an incoming call tap the red receiver symbol If the device belongs to a group the call is retained at the other devices N Accepting a call Tap on the pick up symbol green receiver symbol to accept an incoming call In the case of a door call you can pick up the call within 60 seconds of the last ring tone After accepting the call the speech connection is estab lished During an active call the speech button lights up If you do not manually end the door call automatic disconnection of the door call takes place after a system timeout of 10 minutes to ensure that noises generated inside the home are not mistakenly relayed outside RR Microphone off Using the microphone silencing function you can mute the microphone in the panel during an active call in order to talk privately to a person in the room Your call partner at the door or the internal user cannot hear your conversation This is indicated by microphone symbol highlighted in a dif ferent colour with the line through Ending a call Tap on the red receiver symbol to end the existing call If you do not manually end the door call automatic disconnection of the door call takes place after a system timeout of 10 minutes to ensure that noises generated inside the home are
16. images Calls list Delete all entries Settings Audio Phone volume Ringtone volume Display Brightness Language Language selection Image view Standard screen mode Full screen mode Design Design Light Dark Position of menu prompting and navigation bar Left Right ECO mode Call display Idle status Cleaning the display System User information Device information Licence information Reset Factory setting ECO mode Overview of menus and symbols Explanation of symbols A Start Start screen Mail notification system Door release Drop down menu Open Door call images Be 4 O Full screen mode Drop down menu Close TX Delete all images Standard screen mode Call forwarding On KA Delete image Accepting a call d EARN MA Ringtone Off SR Settings AZA Microphone off Bek X Doormatic On F J Audio H Reject call Ending a call Zi Contacts 7 Volume Storey call DD A Call silencing Y Volume Missed calls Calls list O Contact Concierge ma Display EN Contact Internal Brightness All contacts Contact Standard screen mode 30 O S Brightness External cari Zo Contact Groups Language m Doors Image view LA Cameras Door station y Design List ECO mode a Cleaning the display Full screen mode Bel 2 Syst
17. ircuit board e RJ45 plug 2 x e Dummy card for SD card insert e Operating instructions for the end user e This product information Video memory Pictures are stored centrally on the server There are currently no plans to allow pictures to be stored on SD card Similar to photographs saved images are subject to copyright SD card There is a dummy card inserted in an SD card slot at the top of the device which is used as a dust protector When upgrading with new func tions this slot can be used to install a memory card Servicing If the device requires servicing contact your specialist dealer or elec trical installer Customer service in the Furtwangen factory 49 7723 63 434 Product overview di N 5 a N 6 TO C ZA cE Zn 08 00 16 12 2014 7 1 0 Q oO o Oo Front door Entrance Kitchen Study Hallway 8 Entrance Kitchen Study Hallway Living room A C G q Dr Ringtone Study Study Entrance Basement zer 5 or 2 OU QR 8 a amp J 10 SSS SIEDLE aa A 41 2 3 3 4 L J The Access video panel is charac terized by its generously dimen sioned touchscreen Two buttons are assigned to the basic functions Speech Regulate volume and Door release Other functions are actuated at the display Clear symbols intuitive operation The most im
18. ling a contact using the Contacts menu Dialling a contact using the start screen A It is only possible to dial a contact using the start screen if you have created tiles with contacts on the start screen Procedure 1 On the start screen tap on the contact to which you wish to make a call 2 The call set up process begins A message appears in the display 3 If the contact accepts the call the display changes to the call mode Door calls are connected immedi ately 4 In the call mode all operable func tions are displayed Dialling a contact using the Contacts menu w All the contacts enabled for you are located in the Contacts menu The Contact list can contain internal and external users groups terminals and any doors which can be dialled Procedure 1 Tap on the Contacts symbol in the navigation bar in order to open the Contacts menu 2 To allow the required contact list to be displayed tap on the relevant symbol All Concierge Internal External Groups Doors 3 Tap on the contact to which you wish to make a call 4 The call set up process begins A message appears in the display oO 18 5 If the contact accepts the call the display changes to the call mode Door calls are connected immedi ately 6 In the call mode all operable func tions are displayed Missed calls Callback Procedure To return a missed call change to the call log menu and type in the relevant
19. log entry The call log menu is reached using the navigation bar or the missed calls symbol in the status display Selecting a door station A selective call to a specific door call station is possible if this has been programmed set up for your Access video panel Direct dialling of door call stations is then possible either using a tile set up on the start screen or using the Contacts menu Changing the display mode e5 A en La There are 2 ways in which you can change the video image view e Tap twice on the displayed camera image in order to change between the display modes standard icon view and large icon view e Tap on the large icon view symbol or on the standard icon view symbol to change between the display modes standard icon view and large icon view Defining the image view oF 7 The required icon view for pictures and videos can be defined in the Settings menu for all door calls tele phone calls as standard Procedure 1 In the navigation bar tap the Settings symbol 2 Tap the icon view symbol 3 Tap standard icon view or large icon view in order to define the required icon size for images and videos 4 Tap OK to confirm your selection 5 All door calls telephone calls will be displayed in future with the selected icon size Care instructions Dry aggressive cleaning agents and abrasive detergents can damage the surface Only ever clean your indoor device using a soft damp cloth
20. portant button is also he biggest The unmistakable mouth symbol clearly indicates what he button is for to accept calls The call tone is accompanied by par allel flashing of the mouth symbol guiding the hand of the operator to he correct place Once the call has been accepted the mouth symbol ights up continuously The door release button clearly stands out his enhances security as it cannot be confused or actuated by mistake 1 Display with touch function touch screen 2 Speech button with LED display and rocker switch for setting the speech volume 3 Loudspeaker 4 Door release button 5 Microphone 6 Status displays 7 Display of the start menu time and date standard configuration 8 Content area 9 Navigation bar 10 Card slot for SD card 11 Number of pages and displayed page Product overview Speech button Functions Accepting a call In the case of a door call you can pick up the call within 60 seconds of the last ring tone If an internal call is in progress you can accept the call within 120 seconds after the last ring During an active call the speech button lights up Press the speech button in order to accept the call The panel only transmits speech in one direction and automatically switches over Setting the call volume The call volume can be set in five steps both during a call and also without an active call If you have set the minimum volume only the on
21. us the initiation period for the door release is pre set to 3 seconds This can be changed in the Access server Touchscreen Operation Accessing menus 1 Tap on the required symbol Accessing functions 1 Tap on the required tile Moving tiles 1 Using any finger touch the tile you wish to move on the start screen The tile briefly changes colour 2 Drag the tile using your finger to a free space on the start screen Touchscreen Operation Changing pages Start screen 1 Use any optional finger to swipe the start screen horizontally using the touchscreen to change pages If you are on the first or last page the swipe movement will only work back in the opposite direction The number of existing pages is indicated by dot for each The dots are located in the centre at the lower part of the screen The current page is highlighted from the others in colour The start screen comprises several pages which can be changed by swiping Overview of menus and symbols Menu structure User interface Start Call forwarding Ringtone Doormatic Contacts All Concierge Internal External Groups Doors Cameras Standard screen mode Full screen mode Switching All switching functions Doors General Light Status display Mail notification system Door call images Standard screen mode Full screen mode Delete all
22. view 5 Deleting an image 4 Rejecting a call g Design 5 Remark 3 Daviceinformation 5 Reset to as delivered status 9 Dialling a contact 8 Ring tone 11 13 Dialling the door station 13 18 Safety remarks 3 Display navigation 2 Saving an image 6 Display symbols status change 11 Scope of supply 5 Disposal 20 SD card 4 Door call 6 Servicing a Door call images 9 12 14 Settings 9 12 15 Door release button functions 6 Speech button functions 6 Doonnatic 11 13 Standard icon view 13 15 ECO mode 9 12 15 Start drop down menu 9 12 13 Electrical voltage 3 es 9 12 14 Electrostatic charging 3 Sen 5 na 6 1617 Touchscreen Operation 7 Evaluating all missed calls according to date and time 2 User information 5 21 22 23 SSS SIEDLE 2015 01 15 Printed in Germany Best Nr 0 1106 049155 EN S Siedle amp S hne Telefon und Telegrafenwerke OHG Postfach 1155 78113 Furtwangen BregstraBe 1 78120 Furtwangen Telefon 49 7723 63 0 Telefax 49 7723 63 300 www siedle de info siedle de
Download Pdf Manuals
Related Search