Minka Lavery 1295-648 Instructions / Assembly
Contents
1. H and thread into ceiling loop protruding through canopy Notice It is important to use proper chain pliers not included To OPEN and CLOSE the chain included with this fixture Do not open them with other tools that may twist or _ stress the chain links It is important to use proper chain pliers like the ones shown in the diagram er Your installation is now complete Return power to the junction box FA XTE WRES Wite or R bbed Copper i HAE Qound HUE WRES WES Vii te een or Neutral Bare Copper G ound 9 american lighting A ae Intertek association2. INSTALLATION INSTRUCTIONS FOR 1295 Minka Lighting Inc This product is protected by United States Federal and or State Law including Patent and or Copyright laws WARNING SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER ASSEMBLING THE FIXTURE Fig 2 Fig 1 1 Carefully unpack new fixture and lay all the parts on a clear surface 2 Return the five arms to suitable position sce figure 2 3 Attach the loop A to the column C by turning it clock wise until tight 4 Attach the column C to the fixture body E by turning it clock wise until tight 5 Attach the finial F to bottom of the fixture body E 6 Place the tube D over the socket of the fixture body E 7 Hook the end of chain B to the leaf of the column C and the loop of the fixture body E 8 Hang the finial G to the finial F 9 Install a light bulb in accordance with the fixture s specifications DO NOT EXCEED THE MAXIMUM WATTAGE RATING HANGING THE FIXTURE Fig 1 Sf CHAIN L Shut off the power at the circuit breaker and remove old fixture from a A ceiling including the old crossbar wy i Thread nipple C into toop F until snug Thread other end of nipple C with loop attached into crossbar D until snug 4 Place lock washer B over end of nipple protruding through rossbar and thread hex nut A onto nipple unti tight 5 Take this crossbar assembly and mount to ceiling junction box with Fig 2 junction box screws E Ti
3. ghten screws securely with screwdriver 6 Using proper chain pliers to open one end link of the chain provided and connect to the fixture loop J Close the link 7 Lace the fixture wires through the chain 8 By measuring determine correct number of links needed for proper hanging height Using proper chain pliers disconnect and discard remaining chain 9 Slip loop collar H over the chain then do the same with the canopy 10 Open the other end tink of the chain and hang the fixture on the leop at the ceiling Close the link 11 Feed the fixture wires through the loop F and nipple C and pull until taut CONNECTING THE WIRES Fig 3 1 Take the black wire from the ceiling junction box and the smooth Er wire leg from the fixture and twist bare ends together Twist wire connector onto end of wire until snug 2 Repeat same process with white junction box wire and ribbed wire leg of fixture wire NOTE Twist wires together in the same direction you twist the wire connector onto wires 3 If your junction box has a grounding wire green or bare copper attach this wire and the bare copper wire from the fixture together as step LI junction box has no ground wire attach the bare copper fixture wire to the green ground screw on the crossbar 4 Tuck these wire connections neatly into the ceiling outlet box and a then raise the canopy G all the way to the coiling Raise the loop RAAN BUNGO ELATURE INSTRUC TON collar
Download Pdf Manuals
Related Search