Home Decorators Collection 26661 FAQ
Contents
1. match Yes universal remotes and receivers are compatible with this fan However you must use a paired remote and receiver There is no guarantee that the receiver you are currently using will use the same hardware or software as the new one You must replace both the remote and receiver The light kit for this fan is not dimmable with the CFL bulbs that are included However if you change the bulbs to 60watt maximum incandescent bulbs and change the ON DIM dipswitch on the remote the lights will be dimmable Due to inconsistencies in the manufacturing process of LED light bulbs we do not recommend replacing your CFL or incandescent light bulbs with LED bulbs in ceiling fans with remote controls NO you should NEVER use a dimmer switch to control a ceiling fan It will cause premature wear on the capacitors and the motor It will also cause the fan to make noise as the motor was intended to have a 120v AC power source at all times Ceiling fans are required by law to have a light limiter built in prevent over lamping 180 watt maximum combined power draw Refer to your ceiling fan owners manual for details about the maximum wattage bulb that you can put in your fan and not over lamp Yes any threaded 3 4 75 diameter downrod will work with your ceiling fan To change the light bulbs remove the globe by placing both hands on opposite sides of the edges of the globe and twist counter clockwise when looking up at the fa2. Frequently Asked Questions Can use this fan outdoors What size downrod can use with this fan Where can purchase a longer colored downrod to match my fan Is this fan compatible with a universal remote control Is the light dimmable Can change my CFL or incandescent light bulbs to LED light bulbs with my remote control fan Can use a dimmer switch to control my fan changed the light bulbs in my ceiling fan light kit and now none of the lights work Can use a different brand downrod with my Home Decorators Ceiling fan How do change the light bulbs in this fan Can this fan be mounted on a sloped angled or vaulted ceiling No Windward ceiling fans are not designed to work in areas where water or humidity are present The humidity will damage the blades and water or condensation build up will damage the motor Most fans are compatible with a 48 downrod without the need to extend the wiring The most important thing is that the downrod is 3 4 75 in diameter At this time custom colored downrods in lengths longer than the included one are not available The best solution at this time is to purchase a brushed nickel or white downrod scuff the surface with steel wool or a new kitchen scrubber wipe it clean with a damp cloth allow it to dry and spray paint it to
3. n from the floor Yes this fan can be mounted on a sloped or angled celing installation will require the purchase of an extension downrod and on a vaulted ceiling steep angle you will need to purchase a Westinghouse Cathedral ceiling fan canopy kit it can be purchased from www homedepot com What are the blades made of The blades of the Windward IV ceiling fan are made of ABS plastic
Download Pdf Manuals
Related Search