Melnor 557-869 Instructions / Assembly
Contents
1. 3100 ae a meinor Two zone Electronic Water Timer User Instructions Batteries Install 2 AA Alkaline batteries by removing the battery holder from the back of the timer and inserting the batteries as indicated Replace the battery holder Once installed the LCD screen will be working with the letters OFF flashing beside MANUAL Installing the Timer Attach the timer directly to an outside faucet and turn on the water Attach a hose to the timer outlet and then to a sprinkler soaker hose or other watering system Note The timer can be programmed before installation Programming the Timer Press the UP key until the numbers beside TIME are flashing A X PLUS V DOWN Set the current time using the PLUS and MINUS keys By holding the key down the time will change rapidly A tap will cause a stepped change Once you have set the correct time use the DOWN arrow key to move to the next section Use the PLUS and MINUS keys to select the ZONE you want to program Use the DOWN key to move to the next section Select when you want to begin watering in the START WATER section Again adjust the time using the PLUS and MINUS keys Move to the next section Set how long you wish the water to run in the WATER FOR section This time can be adjusted up to 240 minutes Move to the next section Select how often you would like to water in the WATER EVERY section This is set in ho2. the soil and delays watering if it is not needed For more information visit www melnor com conservation aqua sentry html Disabling the Program If you would like to suspend automatic watering for an extended period simply change the PROGRAM line to OFF When you are ready to resume watering switch PROGRAM to ON Watering will begin at the START WATER time Each ZONE is disabled or enabled independently Program Memory This timer has memory If the battery fails or is removed even for extended periods the program will be retained After installing afresh battery you simply need to set the TIME The timer will retain the existing program a meinor Melnor Inc Winchester Virginia 22603 USA 877 283 0697 www melnor com 3100_INS_EN_WEB
3. urs or days Move to the next section Activate the program by adjusting the PROGRAM section to ON Watering will begin at the START WATER time The timer is now programmed ON will flash for 5 seconds and then stop The timer screen will go blank after 5 minutes to conserve power The time and program status ON or OFF will remain visible Pressing any button will wake the timer Move back to ZONE and select the unprogrammed zone Repeat the programming steps to set up the second watering zone Changing the Program To make a change to the program simply wake the timer by pressing any button Move to the sections you wish to change and adjust as needed Watering will resume at the START WATER time Manual Watering Using the UP and DOWN arrows move to MANUAL Using the PLUS button adjust the time you wish to water The timer will wait 5 seconds and begin to water Manual watering can be up to 240 minutes Rain Delay In the event of predicted rainfall you can temporarily suspend automatic watering for up to 3 days Simply move to RAIN DELAY and use the PLUS button to select the desired delay After the delay period has passed the timer will return to the programmed operation Automatic Rain Delay This timer will work with AquaSentry Melnor s exclusive Automatic Rain Delay AquaSentry actually monitors the moisture in
Download Pdf Manuals
Related Search