Phillips Manufacturing Company CNRBN2 Instructions / Assembly
Contents
1. te HILLIP 9 Installation Recommendations MANUFACTURING CO Engineered to Perform PHILLIPS gripSTIK Vinyl 2 Way Corner Caps Installation Recommendations Phillips recommends installation in accordance with applicable ASTM standards and using prevalent industry standards General Installation Guidelines Phillips gripSTIK vinyl 2 way corner caps are designed to finish where 2 Outside 3 4 Bullnose Corners intersect and can be installed using a variety of methods The method listed below is a guideline Method Spray Adhesive Outside Outside gripSTIK Spray Adhesive Recommended 90 90 1 For 3 4 radius bullnose corner beads and corner cap installation drywall must be set back so it does not interfere with bullnose radius 2 The installation of gripSTIK vinyl 2 way corner caps must occur before the installation of the 3 4 bullnose corner bead Drawing 3 Puta coat of spray adhesive on the back of the corner cap Not to Scale a Immediately apply cap to drywall and position in place b If the adhesive dries too long it will be hard to reposition c At some point the adhesive will lose tackiness and will not bond If this happens reapply adhesive to cap 4 The rate at which the adhesive dries varies depending on heat and humidity Test in your conditions Use handle of your taping knife or installation tool to apply pressure along mud flanges perforated sections Bond strength is greatly enhanced with this cruc2. ial step Staple each mud flange perforated sections with several 1 2 crown staples Pressure the mud flanges again see step 5 Install 3 4 bullnose corner bead following corner bead installation instructions No primer is needed Finish as usual 0 For cold weather winter applications please refer to the installation recommendations in the Gypsum Association GA 220 06 of 40 F or warmer gi Ae ao With Phillips gripSTIK vinyl beads trims and corner caps No mud additives needed No primer needed Made in the U S A Phillips is proud that all our beads trims and accessories are made in the United States of America orrect utilization of this information Version 1 0 Page 1 of 1 PHILLIPSmrca com 2012 Phillips Manufacturing Company E E
Download Pdf Manuals
Related Search