Strait-Flex AS-10 Instructions / Assembly
Contents
1. FAX 636 300 0414 STRAITFLEX COM2. ST WIT ALEXx arch stick DIRECTIONS FOR USE 4 PREPARATION Run your taping knife over the corner area and remove any high spots Fold over and remove tear strip from both sides of ARCH STICK Using ARCH STICK as a ruler cut to length For a perfect straight to curve transition leave tear strip intact in straight areas 2 INSTALLATION With a 4 or 5 taping knife apply a smooth liberal coat of compound to corner Press ARCH STICK firmly into compound to form a uniform curve Wipe down tight and smooth with a 4 or 5 taping knife Let dry for several hours or overnight For high volume applications use BIG STICK399 Rolling Tool for fast installation and squaring up corner beads Available at straitflex com HELPFUL HINTS Use push pins to Position Arch Stick EJ FILL COAT Apply a fill coat of compound feathering the compound beyond the previous coat Fill coat can be applied immediately after STEP 2 if desired Lightweight compound used in this step makes sanding much easier Let dry for several hours or overnight wa 4 FINISH COAT Apply finish coat Let dry for several hours or overnight Sand lightly 100 150 grit sandpaper with finish coat of all purpose compound or 120 200 grit sandpaper with finish coat of lightweight compound ARCH STICK will not fuzz up like other paper faced arched products 5 STRAIT FLEX INTERNATIONAL INC O FALLON MO PHONE 888 747 0220
Download Pdf Manuals
Related Search