Universal Hardware 4011 Instructions / Assembly
Contents
1. UNIVERSAL uon POOR CLOSER The Professianal s Choice se instructions were prepared to v your door closer correctly Please read these instructions carefully before altempting to install your door closer e Before proceeding a Check all parts included in package according to parts list printed on seperate page b Pull off body cover and disconnect L bracket from arm assembly c Tools required 3 Phillips screwdriver flat head screwdriver 1 8 5 32 and 16 drill bits drill adhesive tape hammer and punch LEFT HAND INSTALLATION RIGHT HAND INSTALLATI pocos PN wn 4 DETERMINE LOCATION OF DOOR CLOSER io a Determine if you have a left or right hand door Wor an b Closer must be installed on the PUSH SIDE 2 MARK DOOR FOR INSTALLATION a Choose proper template for right ar left hand using eilher Ihe L bracket or P bracket b Place template on top jamb of CLOSED DOOR use lape to hold the template in place ie j A HINGE c Use hammer and punch to mark the center of each screw hole then remove ee template 12 24 Machine Screws 12 24 Tap and L Brackets Hollow Metal 160177 OB amp Closer amp P oe 1 8 Dril Bt Softwood Closer amp P 592 Or Git Hardwood 8nd L Brackets Wood Screws Wood tera 3 INSTALL BACK PLATE AND BRACKET On steel and aluminum doors and frames use machine screws Parts List 10 On wood doors and frames use wood screws P2. 011 12_REVA 95055000 For Customer Care cal Toll Free 800 562 5625 or info hamptonproducls com 03 15
3. arts List 11 a Place back plate wilh THIS SIDE TO DOOR towards door and tighten securely with 3 screws Parts List 10 or 11 b Place bracket on top jamb and tighten securely with 3 screws Parts List 10 or 11 BACK PLATE BACK PLATE eLose0 00K ctostn non 4 MOUNT DOOR CLOSER Mount door closer to back plate and securely tighten 4 machine screws Parts List 9 Make sure the speed adjusting valve faces the latch side of the door SPEED IMPORTANT If door closer is mounted upside down the door will NOT open sees LATCH 5 INSTALL ARM ASSEMBLY a Attach square hole of arm to spindle of closer and tighten securely with washer and machine screw Parts list 7 and 8 b Wilh the door closed rotate arm and attach to installed bracket and tighten with machine screw and washer Paris list 12 and 13 c Ifa faster or slower closing speed is required use a flathead screwdriver to tum the speed adjusting valve until Ihe desired speed is obtained Clockwise Slower or Counter Clockwise Faster d Put cover on closer body This door closer has a built in non adjustable hold open feature If the door is opened beyond 85 degrees the door will remain open until it is Le pulled back to less than the 85 degrees then it d will close automatically l ast 2015 Hampton Products International Carp 50 Icon Foothill Ranch CA 9 2610 3000 USA i www universalhardware com a 1 800 562 5625 91000_UH4
Download Pdf Manuals
Related Search