Toledo Fine Locks V190TBIUS15 Installation Guide
Contents
1. INSTRUCTIONS FOR INSTALLATION OF TUBULAR LEVERSETS Latch Backset Adjustment Backset is a distance from the door edge to the centre of the hole on door face A Some locks are supplied with adjustable latch which can fit 2 3 8 60mm or 2 3 4 70mm backset CI Just follow the steps shown below to change backset a oE pe pha a This latch is set for b Keep spindle cam in correct c Your latch is now set for 2 3 4 70mm backset 2 3 8 60mm backset position as illustrated To reset 2 3 8 60mm backset just push spindle Pull spindle cam all the way cam back to left side to right Please make sure that the cams are staying with square shape Latch Face Plate Some locks are supplied with 4 way latch which can fit mortise in or drive in A B Ci a This latch is for mortise in b Rotate latch face clockwise 20 c This latch is for drive in and pull out latch face 1 Mark Door with Template 2 Drill Holes a Start 36 914mm from floor fold and apply template a Drill 2 1 8 54mm gt hole on door face from both sides to from floor mark centre of door edge avoid wood splitting b Select 2 3 8 60mm or 2 3 4 70mm backset as b Drill 1 25 4mm hole for latch desired and mark centre of hole on door face refer step 3c for drive in latch 3 Install Latch a Insert latch in hole mark outline of faceplate and chisel 5 32 4mm deep b Insert latch and tighten screws c For2. drive in latch drill 31 32 24 6mm hole and press latch until it is flush with door edge
Download Pdf Manuals
Related Search