Worker 6274 Use and Care Manual
Contents
1. Lock switch Switch Light switch Safety instructions 1 Wear protective equipment gloves shoes eyewear breathing filters etc Do not wear loose fitting clothing or jewelry Tie back long hair 2 Disconnect from charging equipment when performing maintenance on or while operating the tool 3 Use in a clean and well lit area 4 Store the tool away form heat and dangerous vapors Do not operate close to explosive or flammable materials 5 This is a do it yourself tool amp should be used as such and not considered as heavy duty equipment 6 Keep tools away from children 7 When drilling into metal sheets use a vice to hold the metal to a block of wood 8 Do not use the drill or screwdriver on an electrically live part Locate electrical wires or cables in the wall before drilling into a wall 9 Do not try to open or disassemble the tool or charger Only a specialist should perform maintenance on the tool 10 If the charger becomes damaged replace it before using 11 This tool does not require special maintenance 12 Disconnect the charger before cleaning the plastic parts Use a wet cloth and mild soap Do not immerse the tool in water Do not use cleaning solvents to clean the tool 13 After cleaning a bit make sure that the used bit is securely in its storage position 14 Do not use tool bits that cannot be inserted into the transfer arms Limited Warranty North Amer2. from chuck 2 Rotate drill bit down into lock position This unique cordless screwdriver is equipped with a flip bit quick loader for maximum convenience To charge the unit 1 Connect the charger adaptor to a power outlet and insert the plug into the socket on the handle 2 The red light on the battery display will light up once the adaptor is connected to a power source 3 Once the battery is completely charged the red light will turn off If possible remove the adaptor after the battery is fully charged For warranty purchases please keep your dated proof of purchase File or attach to the manual for safekeeping For customer service cal 1 800 348 5004 or ema feedback natitools com 4 8806274 3 12 To replace a bit Pull the bit from its carrier and replace with a new one as indicated Push down and up on the tip of the bit while pulling up on the base Once the bit passes the holding spring you can pull it out To order replacement bits Send a Request to feedback natitools com or call 1 800 348 5004 To change position Press the lock switch and turn clockwise 90 degree to rotate the handle Screwing Unscrewing The screwdriver is equipped with a forward reverse switch to change the rotation of the unit 1 Clockwise push button to left 2 Counterclockwise push the button to the right 3 To stop rotation release the switch Battery dispalay
3. Please carefully read and save these instructions before attempting to assemble maintain install or operate this product Observe all safety information to protect yourself and others Failure to observe the instructions may result in property damage and or personal injury Please keep instructions for future reference important Operating Instructions Cordless Screwdriver Model 6274 CALIFORNIA PROPOSITION 65 WARNING You can create dust when you cut sand drill or grind materials such as wood paint metal concrete cement or other masonry This dust often contains chemicals known to cause cancer birth defects or other reproductive harm Wear protective gear WARNING This product or its power cord may contain chemicals including lead known to the State of California to cause cancer and birth defects or other reproductive harm Wash hands after handling Specifications Screwdriver Rechargeable battery voltage 4 8V Max Speed 150rpm Max Torque 2 5Nm Battery Ni CD Battery capability 600mAh Forward reverse switch LED Light To load a bit 1 Rotate the magazine to find desired bit 2 Remove the bit by lifting up and out 3 Insert the bit into the chuck Charger Input 120V 60Hz Protection against electric shock Class II Protection against moisture IP20 Output 6V DC 300mA Charge time about 3 5 hours To unload a bit 1 Remove the drill bit
4. ican Tool NAT Industries makes every effort to ensure that this product meets high quality and durability standards NAT warrants to the original retail consumer a 1 year limited warranty from the date the product was purchased at retail and each product is free from defects in materials Warranty does not apply to defects due directly or indirectly to misuse abuse negligence or accidents repairs or alterations or a lack of maintenance NAT shall in no event be liable for death injuries to persons or property or for incidental special or consequential damages arising from the use of our products Shipping and handling charges may apply If a defect is found NAT will either repair or replace the product at its discretion Call 1 800 348 5004 for technical assistance Please provide the following information Model number Part description and number as shown in parts list Serial number if any feedback natitools com Address any correspondence to North American Tool Industries 84 Commercial Rd Huntington IN 46750 1 800 348 5004
Download Pdf Manuals
Related Search