Frigidaire OWF-10303 Instructions / Assembly
Contents
1. IMPORTANT INSTRUCTIONS amp OPERATING MANUAL FRIGIDAIRE Oslo Wall Mount Color Changing LED Fireplace Item No OWF 1 0303 Intertek 4003264 Read these instructions carefully before attempting to assemble install operate or maintain the product Protect yourself and others by observing all safety information Failure to comply with instructions could result in personal injury and or property damage Retain instructions for future reference 1 AAS GENERAL SAFETY INFORMATION When using this fireplace basic precautions should always be taken to reduce the risk of fire electric shock and injury to persons including the following CAUTION Due to the high temperature keep electrical cords drapery and other furnishings at least 3 feet from the front side and rear of the fireplace AP PLP iP 10 11 12 13 14 15 16 17 18 19 20 21 22 Carefully read all instructions before using the fireplace and retain for future reference Remove the unit from its packaging and check to make sure it is in good condition before use Do not let children play with any parts of the packing such as plastic bags etc Check the household voltage to ensure that it matches the fireplace s rated specification Before using the fireplace carefully check the power cord and plug for any damage Be sure that the room is equipped with a working smoke detector Before unplugging the power2. cord Always hold the plug firmly and then remove from the outlet This fireplace is intended for supplemental heat and or decorative purposes Continuous use for several hours can impact the performance and life of the fireplace It is not intended to be used in commercial industrial or agricultural settings Do not use outdoors Do not shorten or change the shape of the bracket Getting Started e Remove the fireplace from the box e Remove the packaging Place it inside the box or safely dispose elsewhere Package Contents e Electric Fireplace e Wall Mount Bracket e Screws and Screw Anchors e Pebble Pack e Remote Control Requires 2 x AAA Batteries Not Included e Instruction Manual Features e Dual heat settings 750Watts 1500Watts e Realistic color changing LED flames with 10 different colors to choose from e Auto color changing mode built in e Flames operate with amp without heat with adjustable flame brightness e Black heat resistant tempered flat glass panel e Built in overheating protection auto safety shut off Quick Reference Guide e Prior to installation please ensure that the voltage and capacity of your power outlet is compatible with your fireplace e Your fireplace may emit a slight harmless odor during its first use This odor is a normal reaction caused by the initial heating of internal fireplace parts and it will not occur again e tis normal for fireplace to make a rattling sound f
3. cord turn off the power When touching the unit keep your hands dry to prevent electric shock Do not place the fireplace near curtains or other inflammable objects Keep combustible materials such as pillows bedding papers clothes and curtains at least 3 feet away from the front side and rear of the fireplace Do not block air intakes or exhaust in any manner to prevent fire Do not use on soft or uneven surfaces like a bed where openings may become blocked Exhibit extreme caution when any fireplace is in the vicinity of children and infants Never leave children or infants unattended while the fireplace is on or plugged in When not in use always unplug the fireplace Prevent water from entering the housing of the fireplace during operation or while in storage Always store the fireplace in a dry area free from any moisture This fireplace is not intended for use in bathrooms laundry areas or similar indoor locations Never place the fireplace where it may fall into a bath tub or get exposed to water in any way Do not use in places where gasoline paint or other inflammable liquids are used or stored Do not run the cord under carpets Do not cover the cord with throw rugs runners or similar products Arrange the cord away from traffic areas such that it will not be tripped over by anyone Do not operate any fireplace with a damaged cord a damaged plug after the fireplace malfunctions or if it has been dropped or damaged in an
4. ep Two e Make sure the area to be drilled does not have any hidden electrical wires or water and gas pipes e The wall fixings provided is for concrete walls only please use suitable fixings for your wall type If in doubt contact a qualified hardware expert e Drill holes into the wall with respect to the four markings and then insert the wall plugs Next place the bracket onto the wall such that the holes are aligned Insert the appropriate screws into the wall and then tighten them with a screwdriver Step Three e Using the two supplied small black screws attach the lower fixing bracket to the base of the fireplace such that the bracket is fitted to be level with the back e Carefully lift up the fireplace onto the top rear ledge of the fireplace Once the ledge latches onto the wall bracket and is evenly balanced gently bring the fireplace down against the wall e Mark two positions on the wall for two holes to match the lower fixing bracket holes Once the positions are properly marked remove the fireplace e Drill holes into the marked position on the wall and then insert the wall plugs e Put the fireplace on the wall and fasten the bottom fixing bracket to the wall using the provided screws to permanently fix the fireplace in place Step Four e Unpack the pebbles from the bag and place them along the light unit in the desired position Please note the pebbles are located in the side of the polystyrene packaging Step F
5. hidden electrical wires or water and gas pipes The minimum distances must be observed as shown in the diagrams below During installation of the fireplace avoid any possible damage to concealed cables Please be careful when drilling holes This fireplace is designed to be permanently fixed to a wall Choose a wall that is sturdy enough to hold the weight of the fireplace such as a brick or cinder block wall If positioning on drywall it must be fixed to studs If you are not sure if the wall is stable enough then consult a hardware expert The wall bracket must be fixed horizontally with the cable routed to the bottom right of the fireplace For optimum viewing of the fuel bed it is recommended that there be a distance of 2 feet from the bottom of the fireplace relative to the floor see figure for recommended fixed dimensions 35 4 inch 22 inch _ 2 feet Step One Keep the top of the fireplace at least 3 feet away from the ceiling or other objects for optimum heat ventilation Remove the front frame from the fireplace and place it away safely so that it does not become damaged e For optimum viewing place four marks on the wall with respect to the recommended fixed dimensions for the top screws see figure below e Note use a level when marking the positions of the holes to ensure that the bracket is mounted horizontally St
6. ive e Place the front frame over the front of the fireplace aligning the slots in the bracket at each side of the glass panel with the lugs on the sides of the fire see figure below Two people will be required for this operation a Instructions for Use This fireplace can be operated either by the switches located on the top right hand side of the fireplace or the supplied remote control Manual Operation The switches are located on the top right hand side of the fireplace The standby switch must first be turned on Press the button once to turn on the fireplace and flame effect A red indicator light will appear to indicate that the function is ON Press the button for 3 seconds to operate the automatic color change function The flame colors will change every 10 seconds Press the 750W button once for low heat setting press twice to turn off the heat Press the 1500W button once for high heat setting press twice to turn off the heat Remote Control Operation The power switch located at the right hand side of the fireplace must first be switched on the fireplace will beep to indicate that it is powered up Insert 2 x 1 5V AAA batteries not included into the battery compartment of the remote control Make sure they are inserted with the correct polarity The signs placed in the proper position Securely close the battery compartment cover It takes some time for the
7. or a short duration of time during its first use e lf your fireplace does not emit heat please ensure the fireplace switch is on For further information please refer to the Troubleshooting section of this manual 3 Srno tem Description Quantity o oan o o scrws o4xe mm 2 Screws 04 x 35mm inlet fos cos Foam Protection Let 1 oo ereet T l l Helpful Advice Before Installation e Please retain all packaging until you have checked and counted all the parts and other package contents e The package contains small apparatus which should be kept away from young children and infants e We suggest that you move all the smaller parts into a container to reduce the risk of losing them e Atleast 2 people are required to install this fireplace e tis recommended to place your fireplace near an existing outlet for ease of electric connection e Store your fireplace in a dry safe and dust free place while drilling for fireplace installation e Do not attempt to wire new outlets or circuits To reduce the risk of fire electric shock or injury to persons always have a licensed electrician perform maintenance and other repairs Tools Needed e Power drill e Screwdriver Installation Do not connect the fireplace to the power supply until properly fixed to the wall and the instructions are carefully read Make sure the area to be drilled does not have any
8. receiver to respond to the transmitter Do not press any buttons on the remote control more than once within two seconds in order for the fireplace to operate properly Press the standby button on the remote control once to turn on the fireplace with flame effect Press the 750W button once for low heat setting Press the button again to switch off the heat Press the 1500W button once for high heat setting Press the button again to switch off the heat Press the DIMMER button to change the flame color Every time you push the button the colors will change in the following order o Amber Red Green Blue Red and Green Red and Blue Green and Blue Red and Amber Green and Amber Blue and Amber O O O O O O O O Auto Safety Shut Off Mechanism This fireplace is equipped with a safety shut off feature which initiates if the fireplace overheats e g Due to blocked air vents For safety reasons the fireplace will NOT automatically reset and will need to be manually turned ON To restart the fireplace unplug the fireplace from the power outlet for at least 15 minutes Next reconnect to the power outlet and turn on the fireplace 8 Troubleshooting Check if the unit is plugged in the power outlet Unit does not work does not heat Check if the unit is in Standby mode If so turn the unit ON Check if the heat is turned OFF Check for safety cut off operation Check if the unit is plugged in the power outle
9. t No flame effect Check if the unit is in Standby mode Turn the unit ON Cleaning amp Maintenance e Disconnect from the power supply before attempting any maintenance or cleaning in order to reduce the risk of fire electric shock to persons or damage to property e Warning Always disconnect from the power supply before cleaning fireplace e For general cleaning use a soft clean duster Never use abrasive cleaners The glass viewing screen should be cleaned thoroughly with a soft cloth Do NOT use proprietary glass cleaners e Periodically check all fixings and tighten if necessary e The LED bulbs inside can NOT be replaced Technical Specification e Supply 120V 60Hz e Rated Power 1500W e Bulb LED cannot be replaced
10. y manner Return the fireplace to an authorized service facility for examination electrical or mechanical adjustment or repair Do not insert fingers or allow foreign objects to enter any ventilation or exhaust opening as this may lead to an electric shock or fire or may even damage the fireplace This fireplace becomes hot during use To avoid burns do not let bare skin touch hot surfaces If necessary use the handles when moving this fireplace Use this fireplace only as described in this manual Any other uses not recommended by the manufacture may cause fire electric shock or personal injure and may void warranty privileges Always plug fireplaces directly into a wall outlet Never use an extension cord power strip surge protector multiple outlet adapter cord reel or outlet type air freshener The use of such devices creates a fire hazard 23 24 25 26 27 28 29 Faulty wall outlet connections may cause the wall outlet to overheat Be sure that the fireplace plug properly fits into the outlet before each use During use make sure the fireplace plug does not overheat If necessary have a qualified electrician check and or replace the wall outlet Do not place the fireplace near a bed for objects such as pillows or blankets can fall off the bed and be ignited by the fireplace Never clean this fireplace while it is plugged in To disconnect turn control to OFF then remove the plug from the outlet Never pull the
Download Pdf Manuals
Related Search