Home
Frigidaire KSF-10301 Instructions / Assembly
Contents
1. Unit does not work does not heat Check if the unit is in Standby mode If so turn the unit ON Check if the heat is turned OFF Check for safety cut off operation Check if the unit is plugged in the power outlet No flame effect Check if the unit is in Standby mode Turn the unit ON Replacing the Light Bulb e This fireplace consists of 1 bulb E 12 40W that illuminates a flame effect The light bulb needs to be replaced if you notice a dark section of the flame or when the flames lose clarity e Warning Always disconnect from the power outlet before removing bulbs to reduce the risk of fire electric shock or damage to property e Warning The bulb reaches high temperatures during operation Allow it to cool down before replacing it e Access the bulb panel located on the rear panel of the fireplace see below figure Bulb Bulb Access Panel Screws e Access the bulb by removing the four screws located on the back panel e Replace the bulb with a new one Extra caution should be taken because the bulb can be hot e Close the panel lid using screws e Warning Do not use fireplace without properly putting the lid back in place Cleaning amp Maintenance e Disconnect from the power supply before attempting any maintenance or cleaning in order to reduce the risk of fire electric shock to persons or damage to property e Warning Always disconnect from the power supply before cleaning fireplace e For
2. Return the fireplace to an authorized service facility for examination electrical or mechanical adjustment or repair Do not insert fingers or allow foreign objects to enter any ventilation or exhaust opening as this may lead to an electric shock or fire or may even damage the fireplace This fireplace becomes hot during use To avoid burns do not let bare skin touch hot surfaces If necessary use the handles when moving this fireplace Use this fireplace only as described in this manual Any other uses not recommended by the manufacture may cause fire electric shock or personal injure and may void warranty privileges Always plug fireplaces directly into a wall outlet Never use an extension cord power strip surge protector multiple outlet adapter cord reel or outlet type air freshener The use of such devices creates a fire hazard 23 Faulty wall outlet connections may cause the wall outlet to overheat Be sure that the fireplace plug properly fits into the outlet before each use During use make sure the fireplace plug does not overheat If necessary have a qualified electrician check and or replace the wall outlet 24 Do not place the fireplace near a bed for objects such as pillows or blankets can fall off the bed and be ignited by the fireplace 25 Never clean this fireplace while it is plugged in To disconnect turn control to OFF then remove the plug from the outlet Never pull the cord Always hold the plug firmly and the
3. general cleaning use a soft clean duster Never use abrasive cleaners The glass viewing screen should be cleaned thoroughly with a soft cloth Do NOT use proprietary glass cleaners Technical Specification e Supply 110 120V 60Hz e Rated Power 1350W e Bulb 1x 40W E12
4. IMPORTANT INSTRUCTIONS amp OPERATING MANUAL FRIGIDAIRE Kingston Floor Standing Fireplace Item No KSF 1 0301 GR C US 230949 Read these instructions carefully before attempting to assemble install operate or maintain the product Protect yourself and others by observing all safety information Failure to comply with instructions could result in personal injury and or property damage Retain instructions for future reference 1 AA amp GENERAL SAFETY INFORMATION When using this fireplace basic precautions should always be taken to reduce the risk of fire electric shock and injury to persons including the following CAUTION Due to the high temperature keep electrical cords drapery and other furnishings at least 3 feet from the front side and rear of the fireplace ao a SS a 10 11 12 13 14 15 16 17 18 19 20 21 22 Carefully read all instructions before using the fireplace and retain for future reference Remove the unit from its packaging and check to make sure it is in good condition before use Do not let children play with any parts of the packing such as plastic bags etc Check the household voltage to ensure that it matches the fireplace s rated specification Before using the fireplace carefully check the power cord and plug for any damage Be sure that the room is equipped with a working smoke detector Before unplugging the power cord tu
5. n remove from the outlet 26 This fireplace is intended for supplemental heat and or decorative purposes Continuous use for several hours can impact the performance and life of the fireplace 27 Itis not intended to be used in commercial industrial or agricultural settings 28 Do not use outdoors Getting Started e Remove the fireplace from the box e Remove the packaging Place it inside the box or safely dispose elsewhere Package Contents e Electric Fireplace e Instruction Manual Features e Real wood finish floor standing electric fireplace e Classic design made from real wood e Dual heat settings 675Watts 1350Watts e Realistic wooden log flame effect e Flames operate with amp without heat e 1350 Watts e Built in overheating protection auto safety shut off e Cool touch housing e Portable design e No assembly or hardware needed Simply plug amp heat Quick Reference Guide e Prior to installation please ensure that the voltage and capacity of your power outlet is compatible with your fireplace e Your fireplace may emit a slight harmless odor during its first use This odor is a normal reaction caused by the initial heating of internal fireplace parts and it will not occur again e tis normal for fireplace to make a rattling sound for a short duration of time during its first use e lf your fireplace does not emit heat please ensure the fireplace switch is on For further information please
6. refer to the Troubleshooting section of this manual Helpful Advice Before Installation e Please retain all packaging until all the parts and other package contents are accounted for e t is recommended to place your fireplace near an existing wall outlet for ease of electric connection e Store your fireplace in a dry safe and dust free place while drilling during fireplace installation e Do not attempt to wire new outlets or circuits To reduce the risk of fire electric shock or injury to persons always have a licensed electrician perform maintenance and repairs Instructions for Use This fireplace can be operated with the switches located on the rear panel of the fireplace e Plug the fireplace into a power outlet e The controls are located on the rear panel of the fireplace The ON OFF switch must first be turned ON This will turn on the flame effect e Turn the I button ON for low heat e Turnthe I amp Il button ON for high heat Auto Safety Shut Off Mechanism e This fireplace is equipped with a safety shut off feature which initiates if the fireplace overheats e g Due to blocked air vents For safety reasons the fireplace will NOT automatically reset and will need to be manually turned ON e To restart the fireplace unplug the fireplace from the power outlet for at least 15 minutes Next reconnect to the power outlet and turn on the fireplace Troubleshooting Check if the unit is plugged in the power outlet
7. rn off the power When touching the unit keep your hands dry to prevent electric shock Do not place the fireplace near curtains or other inflammable objects Keep combustible materials such as pillows bedding papers clothes and curtains at least 3 feet away from the front side and rear of the fireplace Do not block air intakes or exhaust in any manner to prevent fire Do not use on soft or uneven surfaces like a bed where openings may become blocked Exhibit extreme caution when any fireplace is in the vicinity of children and infants Never leave children or infants unattended while the fireplace is on or plugged in When not in use always unplug the fireplace Prevent water from entering the housing of the fireplace during operation or while in storage Always store the fireplace in a dry area free from any moisture This fireplace is not intended for use in bathrooms laundry areas or similar indoor locations Never place the fireplace where it may fall into a bath tub or get exposed to water in any way Do not use in places where gasoline paint or other inflammable liquids are used or stored Do not run the cord under carpets Do not cover the cord with throw rugs runners or similar products Arrange the cord away from traffic areas such that it will not be tripped over by anyone Do not operate any fireplace with a damaged cord a damaged plug after the fireplace malfunctions or if it has been dropped or damaged in any manner
Download Pdf Manuals
Related Search
Related Contents
Linksys Telephone Adapter with 1 FXS & 1 FXO Port AWARE VEHICLE INTELLIGENCE INSTALLATION MANUAL FOR Installation & User Guide RIseR and non-RIseR FlIGht Télécharger - La Documentation française TOUCH & PEN 77 Samsung GALAXY Tab 8.9 Instrukcja obsługi - 1 - V-G8000 User Manual Mobile phone Thank you for using our V CLAMP-ON METER MEDIDOR DE TENAZA Oven - De Schouw Witgoed Copyright © All rights reserved.
Failed to retrieve file