Home Decorators Collection 36II200CGT Instructions / Assembly
Contents
1. 6 Attaching the Upper Air Outlet 7 Hanging the Fireplace Attach the upper Air Outlet Baffle I to the fireplace by Hang the Fireplace B on the hooks at the bottom of fastening the Screws CC the Mounting Bracket A and push the Fireplace B into the Mounting Bracket A Re fasten the two screws removed in Step 1 HOMEDEPOT COM HOMEDECORATORS 11 Please contact 1 800 986 3460 for further assistance Installation Wall Hanging continued 8 Hanging the Front Frame o Mount the Front Frame to the Fireplace B using the mounting hooks to hang the front frame Mounting Hooks Mounting Hooks 9 Securing Front Frame Secure the top frame hooks with the two retaining Screws DD Continue to the fuel bed setup instructions Page 18 HOMEDEPOT COM HOMEDECORATORS 12 Please contact 1 800 986 3460 for further assistance Installation Pedestal Base 1 Fastening the Base Bracket 2 Attaching the Small Base Bracket Use two Screws to fasten the lower Air Outlet Baffle Use four Screws EE and four Washers FF to fasten the F to the Base Bracket D Base E to the Base Bracket D 3 Attaching the Base Bracket Fasten the Base Bracket D to the Fireplace B with the provided Screws EE2. 20 00000000 19 Care amp eere 19 Troubleshooting eee eren nne 20 Replacement Parts 21 HOMEDEPOT COM HOMEDECORATORS Please contact 1 800 986 3460 for further assistance Safety Information WARNING This appliance is hot when in use To avoid Please read and understand this entire manual before attempting to T burns do not touch hot surfaces with bare skin If provided assemble operate or install the product If you have any questions use handles when moving this appliance Keep combustible regarding the product please call customer service at materials such as furniture pillows bedding papers clothes 1 800 986 3460 8 a m 7 p m EST Monday Friday 9 a m 6 p m and curtains at least 3 ft 0 9 m from the front of this appliance EST Saturday When using electrical appliances always follow basic precautions to 6 ma w reduce the risk of fire electrical shock and injury to persons including Deng edi the following 1 Read all instructions before using this appliance WARNING Use extreme caution when operating heater near children and the disabled If possible always unplug this appliance when not in use Only a qualified service person should repair this product WARNING This heater is not int
3. DECORATORS COLLECTION 1001369832 36IIZ00CGT USE AND CARE GUIDE MATIAS WALL MOUNT Questions problems missing parts Before returning to the store call Home Decorators Collection Customer Service 8 a m 7 p m EST Monday Friday 9 a m 6 p m EST Saturday 1 800 986 3460 HOMEDEPOT COM HOMEDECORATORS THANK YOU We appreciate the trust and confidence you have placed in Home Decorators through the purchase of this electric fireplace We strive to continually create quality products designed to enhance your home Visit us online to see our full line of products available for your home improvement needs Thank you for choosing Home Decorators Collection Table of Contents Safety Information 3 Em 4 Pre Operation errante Pre Assembly 1e Hardware Included Product Specifications coiere Tools Package 5 Installation Options 8 Wall Hanging 9 Pedestal 13 Fuel Bed Setup Instructions 15 16 FCC IC
4. HOMEDEPOT COM HOMEDECORATORS 13 Please contact 1 800 986 3460 for further assistance Installation Pedestal Base 4 Securing the Top Frame Mount the Front Frame C to the Fireplace B using the mounting hooks to hang the front frame Mounting Hooks Tighten the two Screws DD Continue to the fuel bed setup instructions Page 15 HOMEDEPOT COM HOMEDECORATORS 14 Please contact 1 800 986 3460 for further assistance Fuel Bed Setup Instructions 4 Removing the Logset The fireplace has the option of either using the pre installed logset or the included transparent tray assembly To change the logset to the tray remove the emberbed with logset Placing the Fireglass Rocks Place the Fireglass L or the Rocks K as desired HOMEDEPOT COM HOMEDECORATORS 15 Please contact 1 800 986 3460 for further assistance Operation HOMEDEPOT COM HOMEDECORATORS 16 Please contact 1 800 986 3460 for further assistance Operation continued 1 Powering the Fireplace Push the Power button to supply power to all functions of the fireplace and put the insert in a standby mode Push the Power button again to turn off all functions NOTE All previous settings are held in memory so the next time you power up the fireplace the unit will turn on with
5. and or packaging indicates that used battery shall not be treated as municipal waste Instead it should be left at the appropriate collection point for recycling By correctly disposing used batteries you prevent potential negative consequences for the environment and human health Recycling used materials also conserves natural resources For more information about collecting and recycling used batteries please contact your local municipality your waste disposal service or the point of sale where you purchased this product 18 HOMEDEPOT COM HOMEDECORATORS Please contact 1 800 986 3460 for further assistance FCC IC Information Warning Changes or modifications to this unit not expressly approved by the party responsible for compliance could void user s authority to operate the equipment NOTE This equipment has been tested and found to comply with the limits for Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be d
6. cm 2 in Min 5 cm 2 in 50 20 WARNING Keep drapery and other furnishings at least 3 ft 1 m from the front and sides of the electric fireplace Clearance to combustibles HOMEDEPOT COM HOMEDECORATORS 9 Please contact 1 800 986 3460 for further assistance Installation Wall Hanging 4 Removing the Mounting Bracket 2 Choosing a Wall Location Remove the Mounting Bracket A from the back of the Choose a wall location to attach the Mounting Fireplace B by removing the two pre attached Screws Bracket A Position the Mounting Bracket A CC at the top back of the unit in the desired location Use a level to align the bracket and mark the four holes with a pencil Drilling the Holes Drill six 7 25 in 7 mm holes in the wall Insert the Wall Anchors BB into the holes using a hammer HOMEDEPOT COM HOMEDECORATORS 10 Please contact 1 800 986 3460 for further assistance Installation Wall Hanging continued 4 Attaching the Mounting Bracket 5 Attaching Lower Air Outlet Baffle o Attach the Mounting Bracket A to the wall by fastening Attach Glass Baffle H to the fireplace by fastening the the six Anchor Screws AA into the wall anchors Screws CC
7. costs expenses arising from defective part s repair replacement or otherwise of same will not be covered by this warranty nor shall the manufacturer assume responsibility for same 6 Theowner user assumes all other risks if any including the risk of any direct indirect or consequential loss or damage arising out of the use or inability to use the product except as provided by law 7 All other warranties expressed or implied with respect to the product its components and accessories or any obligations liabilities on the part of the manufacturer are hereby expressly excluded 8 The manufacturer neither assumes nor authorizes any third party to assume on its behalf any other liabilities with respect to the sale of the product 9 The warranties as outlined within this document do not apply to non accessories used in conjunction with the installation of this product 10 This warranty gives you specific legal rights and you may also have other rights which vary from state to state This warranty is void if a fireplace is subjected to prolonged periods of dampness or condensation b There has been unauthorized alteration willful abuse accident or misuse of the product C You do not have the original receipt of purchase IF WARRANTY SERVICE IS NEEDED Contact the customer service department at 1 800 986 3460 8 a m 7 p m EST Monday Friday 9 a m 6 p m EST Saturday Make sure you have your warra
8. for further assistance Operation continued 7 Replacing the Remote Control Battery When the remote control stops operating or its range seems reduced it is time to replace the battery with new ones On the back end of the remote press and slide the battery door open and remove the old batteries Insert two AAA batteries checking that the and sides of the battery match inside the battery compartment Replace the battery compartment door NOTE Do not mix old and new batteries Do not mix alkaline standard carbonzinc or rechargeable nicad nimh etc batteries NOTE Please operate the remote control at a slow measured pace Press the remote control buttons with an even motion and gentle pressure Repeatedly pressing buttons in rapid succession may cause the transmitter to malfunction NOTE Batteries should be removed if the product is to be left unused for a long time Using the Power Cord Correctly This heater is for use on 120 volts The cord has a plug as shown in the figure Connect to properly grounded outlets only Do not use a 2 prong adapter Never use with an extension cord or relocatable power tap outlet power strip 8 Disposing of Used Batteries The battery may contain hazardous substances that could endanger the enviroment and human health This symbol marked on the battery
9. Then remove the electrical plug from the wall outlet i WARNING Make sure the power is turned off before proceeding with repairs Any electrical repairs or rewiring of this unit should be WARNING Keep electrical cords drapery furniture and other combustibles at least 3 ft 0 9 m from the front of the heater and away from the sides WARNING Electrical outlet wiring must comply with local building codes and other applicable regulations to reduce the risk of fire electrical shock and injury to persons WARNING Do not use this fireplace if any part of it has been under water Immediately call a qualified service technician to inspect the fireplace and replace any part of the electrical system N WARNING Disconnect power before attempting any maintenance or cleaning to reduce the risk of fire electrical shock or personal injury HOMEDEPOT COM HOMEDECORATORS 19 Please contact 1 800 986 3460 for further assistance Troubleshooting PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION Unplug the fireplace remove the back panel of the fireplace and check Display shows The thermostat sensor is broken that the thermostat is plugged into the main circuit board If this does not or disconnected solve the problem contact customer service for a replacement thermostat sensor The thermostat sensor is Display shows g broken Contact customer service for a replacement thermostat sensor Inspect the heater and check tha
10. ct Customer Service for new Spinner Motor HOMEDEPOT COM HOMEDECORATORS 20 Please contact 1 800 986 3460 for further assistance Replacement Parts For replacement parts call our customer service department at 1 800 986 3460 8 a m 7 p m EST Monday Friday 9 a m 6 p m EST Saturday A 8 pg STC D Fame Generator Drvo mor mooo 1 control 71 2 viesse 1 6 1 W 2 1 1 Kk mmm T vsere 2 w NOTE The scale and size of parts may be different depending on your exact model A HOMEDEPOT COM HOMEDECORATORS 21 Please contact 1 800 986 3460 for further assistance DECORATORS COLLECTION Questions problems missing parts Before returning to the store call Home Decorators Customer Service 8 a m 7 p m EST Monday Friday 9 a m 6 p m EST Saturday 1 800 986 3460 HOMEDEPOT COM HOMEDECORATORS RETAIN THIS MANUAL FOR FUTURE USE 23 HOMEDEPOT COM HOMEDECORATORS Please contact 1 800 986 3460 for further assistance
11. d SAVE TH ESE persons in order to avoid a hazard WARNING Under no circumstances should this fireplace be modified Parts that must be removed for servicing must be replaced prior to operating this fireplace again HOMEDEPOT COM HOMEDECORATORS 3 Please contact 1 800 986 3460 for further assistance Warranty 1 Year Limited Warranty The manufacturer warrants this product to be free from manufacturing and material defects for a period of one year from date of purchase subject to the following conditions and limitations 1 Install and operate this Electric Fireplace in accordance with the installation and operating instructions furnished with the product at all times Any unauthorized repair alteration willful abuse accident or misuse of the product shall nullify this warranty 2 This warranty is non transferable and is made to the original owner provided that the purchase was made through an authorized supplier of the product 3 The warranty is limited to the repair or replacement of part s found to be defective in material or workmanship provided that such part s have been subjected to normal conditions of use and service after said defect is confirmed by the manufacturer s inspection 4 The manufacturer may at its discretion fully discharge all obligations with respect to this warranty by refunding the wholesale price of the defective part s 5 Any installation labor construction transportation or other related
12. e National Electrical Code ANSI NFPA NO 70 9 There is a thermostat limiter inside the heater When inner temperature overheating or abnormal heating occurs the thermostat protective device will cut off the power supply to avoid damage to the fireplace or risk of fire WARNING Use this appliance only as described in the manual Any other use not recommended by the manufacturer may cause fire electric shock or injury to persons WARNING This appliance has hot and arcing or sparking parts inside Do not use it in areas where gasoline paint or flammable liquids are used or stored CAUTION Never leave the heater operating unattended A Extreme caution is necessary if children or invalids are nearby 4 A NOTE To avoid injury from unexpected starting or electrical shock do not plug the power cord into a source of power during unpacking and assembly The cord must remain unplugged whenever you are adjusting assembling the fireplace DANGER In order to avoid overheating do not cover the If any part is missing or damaged do not attempt to use or heater plug in the power cord until the missing or damaged part is correctly replaced To avoid electric shock use only identical WARNING Do not use surge protectors or extension cords replacement parts when servicing double insulated tools with this product NOTE WARNING If the supply cord is damaged it must be replaced by the manufacturer its service agent or similarly qualifie
13. ended for use in bathrooms Do not use outdoors N laundry areas and similar indoor locations Never locate this appliance where it may fall into a bathtub or other water container Do not cover the cord under carpeting Do not cover with throw rugs runners or the like Arrange the cord away from traffic areas and where it will not be tripped over any ventilation or exhaust opening as this may cause an electric WARNING Do not insert or allow foreign objects to enter shock or fire or damage the appliance 6 disconnect this appliance turn the controls to the off position and then remove the plug from the outlet 7 This heater is for use on 120 volts This product is equipped with WARNING To prevent a possible fire do not block air intakes a polarized plug one blade is wider than the other blade To N or exhaust in any manner Do not use on soft surfaces like a bed reduce the risk of electrical shock this plug will fit into a where the opening may become blocked polarized outlet only one way This is a safety feature If you are unable to insert the plug into the electrical outlet try reversing the plug If the plug still does not fit contact a qualified electrician 8 This appliance when installed must be electrically grounded in accordance with local codes or in the absence of local codes with the current CSA C22 2 Canadian Electrical Code For U S A installations follow local codes and th
14. eplacement parts Estimated Assembly Time 60 Minutes Tools Required for Assembly not included Phillips screwdriver Drill Hammer Level Level Hammer Phillips Screwdriver HOMEDEPOT COM HOMEDECORATORS 6 Please contact 1 800 986 3460 for further assistance Pre Assembly continued PACKAGE CONTENTS NE EE Mounting Bracket Pre Attached Fireplace Base Bracket Base 1 HOMEDEPOT COM HOMEDECORATORS 7 Please contact 1 800 986 3460 for further assistance Installation Options The fireplace can be installed with 2 options 1 Hanging on a wall with provided mounting bracket 2 Freestanding using the pedestal base Follow installation instructions below based on installation preference Option 1 Option 2 Wall Hanging page 9 Pedestal Base page 13 HOMEDEPOT COM HOMEDECORATORS 8 Please contact 1 800 986 3460 for further assistance Installation Wall Hanging Hanging on a wall Your new electric fireplace may be installed virtually anywhere in your home However when choosing a location be sure to follow the general instructions included For best results install out of direct sunlight Power supply service must be either completed or placed within the electric fireplace prior to finishing to avoid reconstruction Min 5
15. etermined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and the receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation This Class B digital apparatus complies with Canadian ICES 003 Care and Cleaning Clean the metal trim using a soft cloth slightly dampened with a citrus oil based product and buff with a soft clean cloth DO NOT use brass polish or household cleaners as these products will damage the metal trim Purchase citrus oil based products at a hardware store carried out by a licensed electrician in accordance with national and local codes If repairing or replacing any electrical component or wiring the original wire routing color coding and securing locations must be followed During any service of this appliance the power to the unit must be turned off First turn the main power switch to the OFF position
16. gs to ensure that the thermostat is set higher air heater from turning on than the current room temperature The heater does not work but Power and Heater settings are ON and thermostat is set Turn the Power to and unplug the unit from the wall outlet for 5 minutes After 5 minutes plug the unit back into wall outlet and operate as normal If the problem persists contact customer service Manual reset overheat protection triggered Flame effect works but heater function does not and the flame effect flashes when the Heater button is pressed With the power on press and hold the Power button on the control panel The heater is disabled for 10 seconds Once re enabled the flame effect will flash multiple times Change the remote batteries The remote control is not There are no batteries or the Operate remote transmitter at a slow measured pace working signal is poor Press the remote control buttons with an even motion and gentle pressure Repeatedly pressing buttons in rapid succession may cause the transmitter to malfunction a The air intakes are dirty or obstructed a Check the air intakes for obstructions or high dust build up The noise when the heater is on is louder than normal b The blower heater assembly is defective b Contact Customer Service for a new Heater Blower Assembly Abnormal noise when the heater is not on and the flame effect The spinner motor is defective Conta
17. nty your sales receipt location of purchase and the model serial number of your product HOMEDEPOT COM HOMEDECORATORS 4 Please contact 1 800 986 3460 for further assistance Pre Operation 1 Remove the product identification sticker from the front of the fireplace Product Identification Sticker 2 Attach the Product Identification Sticker to this Manual below for future reference This information is used for product registration and also is necessary for customer service Attach Product Identification Sticker Here 3 Go to homedepot com homedecorators for product warranty registration If you are unable to complete registration save your proof of purchase for warranty purposes HOMEDEPOT COM HOMEDECORATORS 5 Please contact 1 800 986 3460 for further assistance Pre Assembly HARDWARE INCLUDED un nmm me AA BB CC DD Part Number 35120 44 B 0 SmeAmxom 7 E Seren 7 4 A NOTE Hardware not shown to actual size PRODUCT SPECIFICATIONS PLANNING ASSEMBLY Before beginning assembly of product make sure all parts are present Compare parts with Hardware Included and Package Contents lists If any part is missing or damaged do not attempt to assemble install or operate the product Contact customer service for r
18. t the air inlets and outlets are not blocked as this may cause overheating Unplug the heater for 30 minutes and allow it to cool down Replug operate and monitor the heater for signs of overheating If the problem persists discontinue use of the heater and contact customer service Manual Reset overheat Display shows 5 protection has triggered Check your heater cord and plug connections Faulty wall outlet connections or loose plugs can cause the outlet or plug to overheat Be sure the plug fits tight in the outlet Heaters draw more current than small appliances Overheating of the outlet may occur even if it has not occurred with the use of other appliances During use check frequently to deter mine if your plug outlet or faceplate is HOT If so discontinue use of the heater and have a qualified electrician check and or replace the faulty outlet s Display shows E i Normal operation This is normal operation and the heater will continue to run for several minutes before shutting down Times will vary based on temperatures During this time cool air will blow Check that unit is plugged into a standard 120V outlet Press the Power There is no power There is no power to the unit button several times and make sure the power is set to the position The heater does not blow warm The heater is in a cool down air cycle The heater does not blow any Thermostat setting is preventing Adjust the temperature settin
19. the same settings NOTE Holding the Power button on the control panel for 10 seconds will disable the heater function 3 Adjusting the Heater To set the thermostat use the Heater button on the control panel to select the desired temperature The thermostat setting range is 62 F 82 F or 17 C 27 C or always ON The thermostat is adjustable by 2 F or 1 C increments by pressing the Up or Down lt buttons on the remote control NOTE To change between F C press and hold the Heater button on the control panel for 3 seconds 5 Adjusting the Uplights Press the Uplights button on the remote control to change the uplight between the four settings white blue white blue auto cycling and OFF 2 Adjusting the Spectrafire Flame There are six brightness levels that can be selected Settings 6 4 decrease in Spectrafire brightness Settings 3 1 decrease in Amber only flame brightness Wh 4 Adjusting the Sidelights Press the Sidelights button on the remote control to change the sidelight between the four settings amber blue blue amber auto cycling and OFF 4 2 a A 777 6 Setting the Timer Press the Timer button to cycle through the ten timer settings 30 minutes 1 Hour 2H 3H 4H 5H 6H 7H 8H and 9H and the OFF setting HOMEDEPOT COM HOMEDECORATORS Please contact 1 800 986 3460
Download Pdf Manuals
Related Search