Vornado EH1-0036-46 Use and Care Manual
Contents
1. TVH 600 TOUCH SCREEN CONTROLS POWER BUTTON Press to turn unit ON or OFF red light illuminates when power is ON HEAT MODE To select the heat level you desire press HIGH HEAT for up to 1500 watts or LOW HEAT for up to 750 watts of maximum power FAN ONLY MODE Select FAN ONLY mode to operate the heater with no heat SET TEMPERATURE To select the desired room temperature press the or to raise or lower the temperature by one degree at a time ROOM TEMPERATURE The Touch Screen also indicates room temperature The temperature displayed is the approximate temperature at the location of the Smart Remote The base unit will always attempt to operate using the sensor information from the Remote if a signal cannot be obtained the base unit will function on its own See Smart Remote Temperature Sensor below TIMER The timer function allows you to set the unit to automatically turn off in one hour intervals up to 9 hours Press the to add hours of operation or the to remove hours of operation The unit will completely shut off when the set time has expired SOUND When a setting is changed you will hear a beep to indicate that a setting has been changed LCD DISPLAY Display window will be illuminated when adjustments are being made and the illumination will dim after adjustments are complete SMART REMOTE TEMPERATURE SENSOR Fully control the TVH 600 with the Smart Remote All adjustments made with the Remo2. To use the TVH 600 as a personal fan press the FAN ONLY mode on the touch screen The TVH 600 like any other 1500 watt electric heater draws up to 12 5 amps of electric current If using your TVH 600 on HIGH heat setting causes your home circuit breaker or fuse to trip we offer the following suggestions 1 Try turning off other electrical appliances that run on the same electrical circuit as your TVH 600 2 Run the TVH 600 on LOW HEAT mode 3 Have your electrician add an additional circuit to your homes electrical system ALWAYS USE COMMON SENSE WHEN USING THIS AND OR ANY ELECTRICAL APPLIANCE ADVANCED SAFETY FEATURES ES TIGHT GRILL SPIRALS Resists curious fingers COOL TOUCH CASE Safe to touch even on high heat setting AUTOMATIC SAFETY SHUT OFF SYSTEM If airflow becomes blocked and overheating occurs power to the heating element and fan is shut off TIP OVER PROTECTION If tipped over power to the heating element and fan motor is reduced to prevent overheating IDEAL 120 F EXIT AIR TEMPERATURE Warm enough to heat an entire room GROUNDED HEAVY DUTY POWER CORD Adds durability and a more secure wall connection English 9 VORNADO AIR LLC 5 YEAR LIMITED WARRANTY Vornado Air LLC Vornado warrants to the original consumer or purchaser that this TVH600 heater Product is free from defects in material or workmanship for a period of five 5 years from the date of purch
3. VORN DO Vornado Air LLC A 415 East 13th Street Andover Kansas 67002 800 234 0604 www vornado com Speak your mind www vornado com reviews CL3 0150 RA CL3 0150 RA VOO My VORNADO M READ AND SAVE THESE IMPORTANT INSTRUCTIONS Whole Room Heater Owner s Guide www vornado com MODEL TVH600 Designed engineered and supported in Andover Kansas amp www vornado com Questions or comments Preguntas o comentarios EA consumerservice vornado com CaP 800 234 0604 VORNADO VORTEX ACTION Vornado Whole Room Heater With Signature Vortex Heat Circulation ORDINARY SPACE HEATERS CONTINUOUS UNIFORM Pa ROOM TEMPERATURE Ordinary heaters provide only localized heat Heat immediately rises to the ceiling resulting in cold and hot spots in the room Vornado s unique Vortex Action delivers continuous uniform heat surrounding everyone in the room in a warm comfortable temperature TRUST It is said that trust isn t given but earned For decades Vornado has been earning the trust of our customers by offering them only the best Vornado provides the highest level of performance coupled with the highest level of support available Complete satisfaction with no exceptions this is Vornado s promise to you If you are not satisfied for any reason please contact us Knowledgeable representatives are available at 1 800 234 0604 from 8 00 AM to 5 00 PM CST A wealth of addition
4. Save the plastic bag the heater was shipped in so you can cover the unit and minimize settling dust RESETTING YOUR VORNADO HEATER Your Vornado Heater has a multi level safety shut off system designed to prevent overheating Overheating may occur when the inlets or outlet are blocked a foreign object prevents the blade from turning or the appliance tips over If this happens the safety shut off system will cut power to the heat element and you will need to manually reset the heater 1 Set the POWER switch to OFF and unplug the unit 2 Remove any obstructions 3 Wait 5 10 minutes allowing the unit to cool down 4 Plug in the unit and place in desired position 5 Set the POWER switch to ON Your Vornado Heater should now function normally If the safety shut off system repeatedly shuts off your heater or if it will not reset after following the above procedure DO NOT ATTEMPT TO DISASSEMBLE THE UNIT Call Vornado Consumer Services Department toll free at 1 800 234 0604 OPERATING TIPS The SMART REMOTE SENSOR can be turned off to save battery life or to stop the remote from sending information to the base unit Slide switch on the back of the remote to the OFF position to turn the remote off slide the switch to ON position to allow the remote to send signals 7O The SMART REMOTE SENSOR uses RF radio frequency to send the signals so line of sight is not required for the unit to function However to obtain the best
5. tap outlet power strip Operate this heater only in its upright position Do not operate this heater on an elevated surface such as a shelf or desktop Use only while placed on the floor This heater is equipped with a thermal safety shut off system designed to turn off the heater when an internal overheating condition is detected see How To Use RESETTING YOUR VORNADO HEATER to determine how to check and reset the heater Do not operate this product with any electronic speed control device on the same circuit Do not use heater to dry human or animal hair fur or articles of clothing This heater operates with an infrared remote control Interference between this remote and other remote control operated electrical appliances in your home is possible This product is equipped with a 3 prong plug with a grounding pin as a safety feature To reduce the risk of electric shock this plug is intended to connect to properly grounded outlets only This plug will fit into a grounded outlet only one way Do not alter the plug Do not attempt to defeat this safety purpose of the grounding plug This product must be grounded If the product malfunctions grounding provides a path of least resistance for the electric current to reduce the risk of electric shock The 3 prong plug must be inserted into a grounded outlet that has been properly installed in accordance with all electric codes and ordinances If you are in doubt as to whether
6. use Do not operate any heater with a damaged cord or plug or after the heater malfunctions has been dropped or damaged in any manner Discard heater or return to authorized service facility for examination and or repair Do not use outdoors This heater is not intended for use in bathrooms laundry areas and similar indoor locations Never locate heater where it may fall into a bathtub or other water container 4 English gt Do not run cord under carpeting Do not cover cord with throw rugs runners or similar coverings Do not route cord under furniture or appliances Arrange cord away from traffic area and where it will not be tripped over gt To disconnect heater turn controls to off then remove plug from outlet Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire or damage the heater To prevent a possible fire do not block air intakes or exhaust in any manner Do not use on soft surfaces like a bed where openings may become blocked A heater has hot and arcing or sparking parts inside Do not use it in areas where gasoline paint or flammable liquids are used or stored Use this heater only as described in this manual Any other use not recommended by the manufacturer may cause fire electric shock or injury to persons Always plug heaters directly into a wall outlet receptacle Never use with an extension cord or relocatable power
7. al support is also available online at www vornado com On behalf of myself and the entire staff at our Andover Kansas headquarters thank you for selecting Vornado Sincerely Bill Phillips CEO Vornado Air LEADERS IN AIRFLOW TECHNOLOGY Products and support are available online at www vornado com Q IS ZIPPI FLIPPI WHOLE ROOM x AIR CIRCULATORS AEN fa WHOLE ROOM TOWER WHOLE ROOM HUMIDIFIERS CIRCULATORS HEATERS English 3 IMPORTANT INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING THIS HEATER Please visually inspect all internal and external components before connecting to electric current If any damage is found DO NOT USE THIS UNIT and contact Vornado Air LLC at 1 800 234 0604 When using electrical appliances basic precautions should always be followed to reduce the risk of fire electric shock and injury to persons including the following gt gt Read all instructions before using this heater This heater is hot when in use To avoid burns do not let bare skin touch hot surfaces Use handles when moving this heater Keep combustible materials such as furniture pillows bedding papers clothes and curtains at least 3 feet 0 9 m from the front of the heater and keep them away from the sides and rear Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended Always unplug heater when not in
8. ase If any such defect is discovered within the warranty period Vornado at its discretion will repair or replace the Product at no cost if the Product is returned to Vornado postage paid Repairs not covered by the warranty or outside the warranty period will require a fee to cover the cost of materials handling and shipping This warranty does not apply to defects resulting from abuse of the Product modification alteration repair or service of the Product by anyone other than Vornado mishandling improper maintenance commercial use of the Product damages which occur in shipment or are attributed to acts of God REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER VORNADO SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY Some states do not allow the exclusion or limitation of incidental or consequential damages or allow limitations on how long an implied warranty lasts so the above limitations or exclusions may not apply to you This warranty gives you specific legal rights and you may have other rights that vary from state to state For warranty or repair service call 1 800 234 0604 or email consumerservice vornado
9. com to obtain a Return Authorization RA form Please have or include your Product s model number and serial number as well as your name address city state zip code and phone number when contacting Vornado for warranty service You may be required to provide the original sales receipt For your records 10 English Staple or attach your original sales receipt to this Owner s Guide Please also write your Product s serial number below located on product specs decal Serial No After receiving the RA form ship your Product to Vornado Air LLC Attn Warranty amp Repair 415 E 13th Street Andover KS 67002 To assure proper handling packages must be clearly marked with the RA number Packages not clearly marked with the RA number may be refused at the receiving dock Please allow 1 2 weeks for repair and return of your Product after the Product is received Product registration available online at www vornado com 2011 Vornado Air LLC Andover KS 67002 Specifications subject to change without notice Vornado is a trademark owned by Vornado Air LLC Designed engineered and assembled in the U S A VORNADO CONSUMER SERVICES amp www vornado com EA consumerservice vornado com Cap 800 234 0604 Espa ol 11
10. d timer duration The Remote does not need to be programmed for the Heater to function properly using only the main touch screen display Note You should only need to set up the connection one time upon first use of your Heater If for some reason the Remote loses its connection repeat the Remote Control Quick Start Instructions REMOTE HEATER DISPLAY REMOTE POWER BUTTON POWER BUTTON MODE BUTTON Press and hold Press and hold Press Once for 3 seconds for 3 seconds 6 English SMART REMOTE TEMPERATURE SENSOR This innovation incorporates continuous monitoring of the temperature at the location of the remote This temperature reading is then transmitted back to the base unit The TVH600 automatically adjusts heat output and fan speed to meet and maintain the desired temperature set The benefit of this technology is when you position the Smart Remote Temperature Sensor near you the heater will automatically adjust to meet your desired temperature at that location The base unit will always attempt to operate using the sensor information from the remote if a signal cannot be obtained the base unit will function on its own Fully control the TVH 600 remotely with the Smart Remote Temperature Sensor with illuminated screen Turn the unit ON and OFF select mode FAN ONLY LOW HEAT or HIGH HEAT adjust the desired set temperature up or down and set the automatic off timer all from up to 30 feet away As you adjust the remote th
11. e base unit will beep to indicate it has received your signal The screen light will dim after just a few seconds to minimize room illumination The Remote does not require line of site to operate Illuminated Touch Screen Innovative and easy to use the Touch Screen provides complete control at the base unit Just touch the screen to wake up or turn on the screen Follow the intuitive display and touch the screen to adjust mode desired temperature and timer The Timer can be set to turn the unit off automatically in hour intervals up to 9 hours The screen light will dim after just a few seconds to minimize room illumination Both the remote and the base unit feature one button ON OFF control Automatic Climate Control With this unique technology the TVH 600 does not cycle on and off like most ordinary heaters but uses continuous variable heat and air output to maintain the set temperature This allows the unit to often run on less than high power minimizing noise and energy use all while maintaining your set comfort level TVH600 OPERATING CONTROLS Plug into a standard grounded wall outlet Press the POWER button to turn on the Heater Position the TVH 600 so the vortex beam of warm air is directed across the room unobstructed Using the touch screen select the mode you wish to use LOW heat HIGH heat or FAN ONLY Turn off after use SMART REMOTE TEMPERATURE TVH 600 TOUCH SCREEN CONTROLS SENSOR
12. or not an outlet is properly grounded contact a qualified electrician gt This heater is for use on 120 volts The cord has a plug as shown atA in Figure 65 1 An adapter as shown at C is available for connecting three blade grounding type plugs to two slot receptacles The green grounding lug extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box The adapter should not be used if a three slot grounded receptacle is available JM METAL SCREW COVER a GROUNDED So ET BOX as Figure 65 1 SAVE THESE INSTRUCTIONS English 5 HOW TO USE REMOTE CONTROL QUICK START GUIDE Step 1 Remove static cling decal from the Heater Touch Screen Display Step 2 Plug Heater into approved wall outlet DO NOT turn Heater on Step 3 Place 2 AA batteries included into Remote Aim Remote at Heater Recommended to be within 3 feet for programming the Heater Step 4 Press and hold the Remote POWER button for approximately 3 seconds until display flashes one time The Remote now has generated a new communication signal Step 5 Press and hold the Heater POWER button for approximately 3 seconds until the display begins to flash The Heater is now ready to recieve the new communication signal Step 6 Press the Remote Mode button one time The Heater display will stop flashing and glow solid The Remote and Heater are now linked Step 7 Set the Heater to desired heat setting temperature setting an
13. remote temperature sensing position the remote where it can sense an accurate temperature Setting the remote too close to other heat sources even under a warm lamp or in your lap will cause the remote to sense the temperature as warmer than the air Inversely setting the remote too close to cold drafty areas like a cold window or door will cause the remote to sense the temperature in the room as cooler Placing the remote in a drawer or other similar locations will not allow the unit to sense the true typical temperature Be sure to place the remote out in the open Note Even though the remote sensor may send a signal for additional heat the Remote Temperature Sensor cannot put the Heater into an unsafe heat mode Performance is always limited by maximum power settings and multi level safety shut off systems The remote is not a toy and should only be used in the prescribed manor intended for the use of this heater Note If a room is very large or has too much heat loss the heater may not be able to obtain the desired set temperature at the remote even with the unit running continuously To properly carry the heater place one hand in the back handle opening and use your other hand to hold from the front In smaller areas you might prefer to set the unit in LOW HEAT mode In larger spaces you might prefer to set the unit on HIGH HEAT mode A vortex beam of air will gently keep the air circulating in the room for even uniform heating
14. te will be indicated with a beep from the unit to notify you that the change has been received POWER Press the ON OFF button to turn the unit ON or OFF HEAT MODE Press the HEAT UP or HEAT DOWN arrows to adjust heat settings one degree at a time TIMER Press the TIMER UP or TIMER DOWN arrows to adjust timer by one hour at a time MODE Press the center MODE button to select HIGH HEAT LOW HEAT or FAN ONLY BATTERY REPLACEMENT Screen will indicate when the batteries need to be replaced The Remote requires 2 AA batteries To replace the batteries remove the cover located on the bottom side of the remote Note The SMART REMOTE SENSOR sends frequent signals to the base unit this uses more power than ordinary remotes so more frequent battery replacement will be required English 7 CARE amp MAINTENANCE gt Your heater has no user serviceable parts Do not disassemble the unit it will void your warranty If service is required return your heater to Vornado see Warranty section The motor is permanently lubricated and requires no oiling Because your heater moves a substantial amount of air it will require regular cleaning Be sure to unplug the unit prior to any cleaning activity Use a vacuum cleaner with the brush attachment to clean any accumulated dust on the front grill and the side air inlets During the off season or extended periods of non use store your heater Unplug the unit and bundle the cord
Download Pdf Manuals
Related Search