Martha Stewart Living 1914800400 Instructions / Assembly
Contents
1. HOME DECORATORS COLLECTION BF 25173 MARTHA STEWART LIVING MUDROOM MESSAGE CENTER 19 Hx40 Wx7 D INV 19148 ASSEMBLY INSTRUCTIONS Made In China Max Load 30LB 1 8 Thank you for purchasing this quality product Be sure to check all packing material carefully for small parts which may have came loose inside the carton during shipment Count all parts and material hardware then compare with parts list to be sure all parts are present If any parts are missing or damaged phone fax or mail to our Customer Service Department for efficient and speedy service Please indicate the model number and code letter of part s needed IMPORTANT NOTE Follow instructions listed below in proper sequence as numbered to assure fast easy and correct assembly PARTS LIST A B C 2 LARGE BACK PANEL 1PC ACROSS PANEL 1PC SMALL BACK PANEL 1PC D E F lt V LEFT SIDE PANEL 1PC RIGHT SIDE PANEL 1PC CAM TOOL 1PC G H 11mm 2 FO CAM BOLTS 5PCS CAM LOCKS 5PCS BOLTS 8PCS J K L Y VU ALLEN WRENCH 1PC DOWELS 2PCS 00 5 4 5 A NJ 2 8 M 6mm x 1 2 SCREWS 8PCS SHBETIRONS 22. MALL BACK PANEL C AND ATTACH USING 1 CAM LOCK 4 ASSEMBLE THE ACROSS PANEL e ATTACH THE ACROSS PANEL B TO LARGE BACK PANEL A USING 4 BOLTS I 6 8 5 ASSEMBLE THE PANEL A B e ROTATE 3 CAM BOLT G INTO THE HOLES IN THE LARGE BACK PANEL A e PLACE CAM BOLTS G INTO THE HOLES IN THE SMALL BACK PANEL C AND ATTACH USING 3 CAM LOCK H e ATTACH THE ACROSS PANEL B TO SIDE PANEL D E USING 4 BOLTS 1 6 ASSEMBLE THE SHEETIRON N e ATTACH THE SHEETIRON N TO LARGE BACK PANEL A USING 10 SCREWS 0 7 8 0 M CREE ONU e a EE eg NUT IET WALL 7 ASSEMBLE THE GECKOS 0 e DRILL 10 HOLES INTO THE WALL PLEASE REFER TO THE REAR BACK PANEL S HOLE DISTANCE AND HEIGHT e TAP 10 GECKOS Q INTO THE HOLES ON THE WALL THEN ROTATE 10 SCREWS P INTO THE GECKOS Q e HANG THE CABINET ONTO THE SHEETIRON N 8 8
3. PCS Q 6mm x 5 8 ug SCREWS 10PCS D 1 1 27 SCREWS 10PCS 05 10 5 EVA PADS 2PCS NOTE THE SURFACE WITH THE STICKER IS THE BACK SIDE 29 E NOTE e UPON OPENING THOROUGHLY CLEAN ALL WOOD SURFACES TO REMOVE DUST AND DIRT THAT MAY HAVE SETTLED ONTO FINISH DURING SHIPMENT IN ORDER TO PREVENT DAMAGE DURING ASSEMBLY PLEASE ASSEMBLE THIS ITEM WITH AT LEAST TWO PEOPLE NOTE TURN THE CAM BOLT SCREWS UNTIL THEY ARE TIGHT THE SHOULDER SHOULD BE AGAINST THE SURFACE OF THE PART SHOULDER HOW TO USE THE CAM TOOL ARROW NOTE THE ARROWS ON THE HIDDEN CAM LOCKS SHOULD POINT TO THE CAM BOLTS 4 8 1 ASSEMBLE THE POTHOOKS L e ATTACH THE POTHOOKS L TO SMALL BACK PANEL C USING 8 SCREWS M 2 ASSEMBLE THE RIGHT SIDE PANEL E e ROTATE 1 CAM BOLT G AND INSERT 1 DOWEL K INTO THE HOLE IN THE RIGHT SIDE PANEL E e PLACE CAM BOLTS G INTO THE HOLE IN THE SMALL BACK PANEL C AND ATTACH USING 1 CAM LOCK 5 8 3 ASSEMBLE THE LEFT SIDE PANEL D e ROTATE 1 CAM BOLT G AND INSERT 1 DOWEL K INTO THE HOLE IN THE LEFT SIDE PANEL D e PLACE CAM BOLTS G INTO THE HOLE IN THE S
Download Pdf Manuals
Related Search