Home Decorators Collection 1048700210 Instructions / Assembly
Contents
1. STEP 4 ASSEMBLE SHELF INSERT SHELF HOLDERS 3 INTO THE HORIZONTAL HOLES INSIDE OF SIDE PANEL B C THEN USE FLAT HEAD SCREW 3 TO FIX SHELF E AND SHELF HOLDER 3 STEP 5 ASSEMBLE BACK PANEL H USE ROUND HEAD SCREW 4 TO ATTACH BACK PANEL H ON THE BACK OF PRE ASSEMBLED UNIT P 6 7 STEP 6 ASSEMBLE PREVENT DEVICE 9 USE ELECTRIC DRILL TO DRILL 2 SMALL HOLES ON THE DESIRED LOCATION OF WALL INSERT 2 GECKOS INTO THE 2 HOLES BY RUBBER MALLET USE TWO LONG SCREWS TO ATTACH ONE METAL SLICE ONTO WALL THEN USE TWO SHORT SCREWS TO ATTACH ANOTHER METAL SLICE ON THE BACK OF PRE ASSEMBLED PRODUCT USE PLASTIC ROPE TO LINK THE PRODUCT AND WALL TOGETHER AS SHOWN WARNING THE TILTING PREVENT HARDWARE MUST BE USED AS A PART OF ASSEMBLY OTHERWISE TILTING DANGER MAY BE CAUSED 3 P 7 72. HOME DECORATORS COLLECTION HDC 10487 TW 18687CC TW 18687BK ESSEX CONSOLE TABLE W OPEN STORAGE 3 DRAWER ASSEMBLY INSTRUCTIONS Note Before assembly please be sure to work on a soft flat surface to avoid any damage to the finish Made In China P 1 7 BEFORE ASSEMBLY IMPORTANT NOTE READ CAREFULLY BEFORE ASSEMBLY TO PREVENT DAMAGE TO PARTS FOLLOWING INSTRUCTION LISTED BELOW IN THE PROPER SEQUENCE AS NUMBERED TO ASSURE FAST EASY AND CORRECT ASSEMBLY WOODEN DOWEL INSTALLATION PROCEDURE 1 FILL HOLE 1 4 FULL OF GLUE 0 Q G 2 GENTLY TAP DOWEL INTO HOLE WITH RUBBER MALLET OR USE HAND PRESS IN DO NOT USE HAMMER 3 WIPE AWAY EXCESS GLUE b THANK YOU FOR PURCHASING THIS QUALITY PRODUCT BE SURE TO CHECK ALL PACKING MATERIAL CAREFULLY FOR SMALL PARTS WHICH MAY HAVE CAME LOOSE INSIDE THE CARTON DURING SHIPMENT COUNT ALL PARTS AND MATERIAL HARDWARE COMPARE WITH PARTS LIST TO BE SURE ALL PART ARE PRESENT IF ANY PARTS ARE MISSING OR DAMAGED PHONE FAX OR MAIL TO OUR CUSTOMER SERVICE DEPARTMENT FOR EFFICIENT AND SPEEDY SERVICE PLEASE INDICATE THE MODEL NUMBER AND CODE LETTER OF PART NEED IMPORTANT NOTE FOLLOW INSTRUCTIONS LISTED BELOW IN PROPER SEQUENCE AS NUMBERED TO ASSURE FAST EASY AND CORRECT ASSEMBLY HARDWARE LIST ROUND HEAD BOLT ROUND HEAD BOLT SHELF
3. HOLDER ROUND HEAD SCREW FLAT WASHER HORIZONTAL HOLE NUT FLAT HEAD SCREW 17 PCS SPRING WASHER 4 SETS 4 SETS 4 SETS AD QW Y o ug 6x32mm Q6x50mm 2 Q3x12mm 3 O3x14mm 4 WOOD DOWEL ALLEN KEY GLUE HANDLE 4 PCS 1 1 PC BOLT 2 3 SETS 5 6 7 T 8 2 SETS TILTING PREVENT HARDWARE d Y 3 8x32mm 9 P 2 7 PARTS LIST TOP FRAME LEFT SIDE PANEL RIGHT SIDE PANEL 1 PC 1PC 1 A BOTTOM PANEL SHELF LEG 1 PC 1 PC 4 PCS ao LEG BACK PANEL 1PC 1PC 22 G H NOTE THE SURFACE WITH THE STICKER IS THE BACK SIDE P 3 7 STEP 1 ASSEMBLE BOTTOM PANEL D AND SIDE PANEL B amp C USE ROUND HEAD BOLT AND HORIZONTAL HOLE NUT 2 TO ASSEMBLE BOTTOM PANEL D AND SIDE PANEL B amp C TOGETHER BY ALLEN KEY 6 AS SHOWN STEP 2 ASSEMBLE LEG F amp G ROTATE LEG F amp G ONTO BOTTOM PANEL D TIGHTLY P 4 7 STEP 3 ASSEMBLE TOP FRAME A FILL RELEVANT HOLES 1 4 FULL OF GLUE INSERT WOOD DOWEL 5 INTO THESE HOLES DETAILS SEE WOODEN DOWEL INSTALLATION PROCEDURE ON PAGE 2 USE ROUND HEAD BOLT SPRING WASHER AND FLAT WASHER 1 TO ASSEMBLE SIDE PANEL B amp C AND TOP FRAME A TOGETHER BY ALLEN KEY 6 AS SHOWN 5 P 5 7
Download Pdf Manuals
Related Search