Home Decorators Collection 1157210410 Instructions / Assembly
Contents
1. HOME DECORATORS COLLECTION SK16790A AMBROSE HALL TREE 70 Hx40 Wx18 D INV 11572 ASSEMBLY INSTRUCTIONS Made In China 1 16 Thank you for purchasing this quality product Be sure to check all packing material carefully for small parts which may have came loose inside the carton during shipment Count all parts and material hardware then compare with parts list to be sure all parts are present If any parts are missing or damaged phone fax or mail to our Customer Service Department for efficient and speedy service Please indicate the model number and code letter of part s needed IMPORTANT NOTE Follow instructions listed below in proper sequence as numbered to assure fast easy and correct assembly PARTS LIST UPPER RIGHT SIDE PANEL 1PC UPPER UPPER LEFT BACK PANEL 1PC RIGHT BACK PANEL 1PC UPPER CENTER BACK 2 PANEL 1PC LOWER LEFT SIDE FRAME 1PC SIDE PANEL 1PC DIVIDER 1PC 2 16 FRONT CROSS BAR 1PC RIGHT DOOR 1PC NOTE THE SURFACE WITH THE STICKER IS THE BACK SIDE 3 16 n 5 8 L ROUND HEAD SCREW 61PCS HANDLE BOLT 4PCS METAL PLATE 23PCS 4 1 2 L FLAT HEAD SCREW 14PCS errr 1 L FLAT HEAD SCREW 4PCS HANDLE 2PCS 1 1 2 FLAT HEAD SCREW 7PCS MAGNET 2PCS LONG PLASTIC COVER 8PCS DOUBLE HOOK 3PCS SHORT PLASTIC COVER 4PCS NOTE THE SURFACE WITH THE STICKER IS THE BACK SIDE 4 16 NOTE UPON OPENING THOROUGHLY CLEA2. M HOLES ON THE DIVIDER L WITH THE LONG PLASTIC COVER 14 16 4 L L d e TIGHTEN THE UPPER LEFT BACK PANEL E THE UPPER RIGHT BACK PANEL F THE UPPER CENTER BACK PANEL G AND THE LOWER BACK PANEL Q BY USING THE 5 8 L ROUND HEAD SCREW AND THE METAL PLATE j 15 16 e ATTACH THE LEFT DOOR O AND THE RIGHT DOOR P TO THE ASSEMBLED PART BY USING THE 1 2 FLAT HEAD SCREW m e TIGHTEN THE HANDLE f ONTO THE LEFT DOOR AND THE RIGHT DOOR P BY USING THE HANDLE BOLT 9 16 16
3. N ALL WOOD SURFACES TO REMOVE DUST AND DIRT THAT MAY HAVE SETTLED ONTO THE FINISH DURING SHIPMENT IN ORDER TO PREVENT DAMAGE DURING ASSEMBLY PLEASE ASSEMBLE THIS ITEM WITH AT LEAST TWO PEOPLE NOTE TURN THE CAM BOLT SCREWS UNTIL THEY ARE TIGHT THE SHOULDER SHOULD BE AGAINST THE SURFACE OF THE PART HOW TO USE THE CAM TOOL NOTE THE ARROWS ON THE HIDDEN CAM LOCKS SHOULD POINT TO THE CAM BOLTS 5 16 ATTACH THE DOUBLE HOOK I ONTO THE TOP MIRROR FRAME BY USING THE 1 2 L FLAT HEAD SCREW 6 16 e INSTALL THE WOOD DOWEL a INTO THE TOP MIRROR FRAME e JOIN THE UPPER LEFT SIDE PANEL A AND THE UPPER RIGHT SIDE PANEL B TO THE TOP MIRROR FRAME A BY USING WOOD DOWEL a 7 16 e INSTALL THE WOOD DOWEL a AND THE CAM LOCK BOLT b INTO THE TOP PANEL e JOIN THE TOP PANEL H TO THE ASSEMBLED PART BY USING THE WOOD DOWEL a FIRST ONCE JOINED TIGHTEN CAM LOCK ONTO BOLT b USING PRE DRILLED HOLES COVER CAM HOLES WITH THE LONG PLASTIC COVER TIGHTEN THE TOP PANEL AND THE TOP MIRROR FRAME BY USING THE 1 1 2 L FLAT HEAD SCREWS h 8 16 INSTALL THE WOOD DOWEL a TO THE BACK SUPPORT SLATS 0 e JOIN THE BACK SUPPORT SLATS D TO THE ASSEMBLED PART BY USING THE WOOD DOWEL a 9 16 TIGHTEN THE MAGNET i TO THE FIXED PANEL 1 BY USING THE 5 871 ROUND HEAD SCREW d 10 16 e INSTALL THE WOOD DOWEL a INTO TOP
4. OF THE FIXED PANEL 1 JOIN THE FIXED PANEL TO THE ASSEMBLED PART BY USING THE WOOD DOWEL a FIRST TIGHTEN THE FIXED PANEL I TO THE ASSEMBLED PART BY USING THE 1 1 2 L FLAT HEAD SCREW TRHOUGH PRE DRILLED HOLES FROM BOTTOM OF THE FIXED PANEL 1 11 16 e INSTALL THE WOOD DOWEL a AND THE CAM LOCK BOLT b IN TO THE BOTTOM PANEL N e JOIN THE DIVIDER L TO THE BOTTOM PANEL N BY USING THE WOOD DOWEL a FIRST e ONCE JOINED TIGHTEN CAM LOCK c ONTO BOLT b USING PRE DRILLED HOLES e COVER CAM HOLES WITH THE LONG PLASTIC COVER k 12 16 e INSTALL THE WOOD DOWEL a AND THE CAM LOCK BOLT b INTO THE LOWER LEFT SIDE PANEL J AND THE LOWER RIGHT SIDE PANEL e JOIN THE LOWER LEFT SIDE PANEL J AND THE LOWER RIGHT SIDE PANEL TO THE BOTTOM PANEL N AND THE FRONT CROSS BAR M BY USING THE WOOD DOWEL a FIRST ONCE JOINED TIGHTEN CAM LOCK ONTO BOLT b USING PRE DRILLED HOLES TIGHTEN THE FRONT CROSS BAR TO THE BOTTOM PANEL BY USING 1 FLAT HEAD SCREW e 13 16 e INSTALL THE WOOD DOWEL a AND THE CAM LOCK BOLT b INTO BOTTOM OF THE FIXED PANEL 1 e JOIN TWO ASSEMBLED PARTS BY USING THE WOOD DOWEL a FIRST e ONCE JOINED TIGHTEN CAM LOCK c ONTO BOLT b USING PRE DRILLED HOLES e COVER CAM HOLES ON THE LOWER LEFT SIDE PANEL J AND THE LOWER RIGHT SIDE PANEL K WITH THE SHORT PLASTIC COVER n e COVER CA
Download Pdf Manuals
Related Search