none TG76P5347S00 Installation Guide
Contents
1. Operation Turning on the tree NOTE If some bulbs do not light or flicker search for any loose plugs and or broken loose or missing bulbs Replace bulbs promptly with the replacement bulbs provided in order to maintain the performance and life expectancy of your tree Step 1 Connect the light strings of the tree together and plug the power cord into a wall outlet Step 2 If the tree comes with a foot pedal step on the On Off button Maintenance Spare parts This tree package includes hinge pins washers bulbs and fuses for any replacement or repair that you need to perform on your tree If extra parts are needed contact the Customer Service Team at 1 877 527 0313 between the hours of 8 am and 5 pm EST Monday through Friday Repairing Loose Hinges Step 1 Place the branch into the slot of the bracket Step 2 Insert a new hinge pin through the holes of the bracket and secure with a washer Use and Care Instructions 1 Before using or reusing inspect product carefully Discard any products that have cut damaged or frayed wire insulation or cords cracks in the lampholders or enclosures loose connections or exposed copper wire 2 Before disassembling the tree unplug the tree and remove all ornaments and decorations 3 Gently lift the tree top straight up to remove from the center section and fold all branches towards the pole 4 Repeat this step for the center and bottom tree sections 5 When st2. lug and remove from the receptacle or other outlet device Do not unplug by pulling on cord 2 Open fuse cover Slide open fuse access cover on top of attachment plug towards blades 3 Remove fuse carefully 4 Risk of fire Replace fuse only with 5 7 or 10 Amp 125 Volt fuse for the power cord set 5 Close fuse cover Slide closed the fuse access cover on top of attachment plug 6 Risk of fire Do not replace attachment plug Contains a safety device fuse that should not be removed Discard product if the attachment plug is damaged SPARE FUSE Troubleshooting Problem Solution Ensure that all tree sections are plugged The tree does into each other and that the tree is not light plugged into the wall If your tree came with a foot pedal step on the On Off button Check for blown fuses at the light string and power cord plugs Replace as needed with the replacement fuses provided Check for loose broken or missing bulbs and replace as needed with the replacement bulbs provided
3. oring the product carefully remove the product from wherever it is placed including tree branches or bushes to avoid any undue strain or stress on the product conductors connections and wires Cover the protective cap on the lt gt Ee to avoid damaging the internal Ku 6 When not in use store neatly in a cool dry location protected from sunlight User servicing instructions Fused Lamp Replacement WARNING Risk of fire This product employs overload protection fuse lamp in each series light circuit to provide overload protection in addition to the fuse s located in the plug Do not replace the fuse lamp contained in this set with any other type of lamp use only spare fuse lamps provided with this product In case of a burnt out FUSED lamp the entire series of 50 lamps will be out To replace the fused lamp 1 Grasp the plug and remove from A Clear Plastic Cover the receptacle or other outlet device Do not unplug by pulling the cord 2 Locate the fused lamp with gray F color lamp holder Pull the burnt fused lamp and plastic lamp base straight out of the lamp holder Gray Lamp Base W Kig Gray Lamp Holder Christmas Tree Model TG76P5347S00 Sku 0000 000 000 3 Replace with a spare fused lamp The fused lamp can be distinguished by a gray lamp base and an additional clear plastic cover 4 Plug in the lights again Fuse replacement 1 Grasp p
Download Pdf Manuals
Related Search