Art Decor HAA6515-S Instructions / Assembly
Contents
1. Style A Place finial over end of rod and tighten with set screw see photo 1 Style B For Resin finial screw finial into plastic plug already inserted into end of rod see photo 2 PHOTO 1 PHOTO 2 Cutting down a rod if necessary 1 Measure rod and determine your cut 2 Cover area with masking tape 1 on either side of determined cut to avoid scratching the surface of rod 3 Cut rod with hack saw or pipe cutter then push out plastic plug and reinsert into new end only appies to for resin finials2. 1 Decide desired height of supports over window Install the L brackets no more than 3 from the ends of the rod Make sure the supports are level 2 Place cradle bracket over L bracket and secure with screw A REN A CRADLE N BRACKET 3 For 10 foot rods screw both rods together with included joiner screw 4 Place rings onto the rod at this time if needed 5 Place rod into Cradle bracket and tighten with screw B N N L BRACKET SCREW B Style A Place finial over end of rod and tighten with set screw see photo 1 Style B For Resin finial screw finial into plastic plug already inserted into end of rod see photo 2 PHOTO 1 PHOTO 2 Cutting down a rod if necessary 1 Measure rod and determine your cut 2 Cover area with masking tape 1 on either side of determined cut to avoid scratching the surface of rod 3 Cut rod with hack saw or pipe cutter then push out plastic plug and reinsert into new end only appies to for resin finials 1 Decide desired height of supports over window Install the L brackets no more than 3 from the ends of the rod Make sure the supports are level 2 Place cradle bracket over L bracket and secure with screw A CRE A a 3 For 10 foot rods screw both rods together with included joiner screw 4 Place rings onto the rod at this time if needed 5 Place rod into Cradle bracket and tighten with screw B N N L BRACKET SCREW B
Download Pdf Manuals
Related Search