none 4-521WH Installation Guide
Contents
1. E Wall Hung Basins Barclay for something sporinl INSTALLATION INSTRUCTIONS Tools Needed e Screwdriver Drill amp Bits e 2 Molly Bolts Toggle Bolts or Large Wood Screws depending on wall Level e Plumbers Basin Wrench to secure Faucet Optional e Wrench e Pencil e Tape Measure Plumbers Putty Wall Hung Installation Parts Included e 1 Basin 2 Metal Mounting Brackets Be sure to re inforce wall before installation We recommend a 2 x12 securely fastened to wall studs at the desired height for your installation Be sure water supply is turned off before beginning 1 Determine the height you want Place basin against the wall Use a level to make sure both sides are level Position each metal mounting bracket against the underside rear of basin and against the wall Mark the location of mounting bracket holes on the wall Remove the basin from the wall Wall should be reinforced before continuing Start to drill hole in 2 x12 re inforced wall for molly bolts or toggle bolts If drill bit hits a stud mount bracket and bolts using large wood screws If molly bolts are used install and expand the bolt holder and then mount brackets If toggle bolts are used make holes large enough to accept collapsible wing nut bolts and then mount bracket Before replacing basin it would be convenient at this point to mount the faucet according to the manufacturer s ins2. tructions Hold basin on wall brackets and ensure that it is level Connect all supply tubes to the faucet Connect trap and drain assembly as described by the manufacturer NOTE DO NOT over tighten or you may damage basin 7 26 10 P 847 244 1234 www barclayproducts com
Download Pdf Manuals
Related Search