KOHLER K-2229-0 Installation Guide
Contents
1. KOHLER INSTALLATION INSTRUCTIONS LAVATORY SHELVES BEFORE YOU BEGIN HOW TO USE THESE INSTRUCTIONS Please read these instructions carefully to familiarize yourself with the required tools materials and installation sequences Follow the sections that pertain to your particular installation This will aid you in avoiding the unnecessary expense associated with improper installation In addition to proper installation read all operating and safety instructions All information in this manual is based on the latest product information available at the time of publication Kohler Co reserves the right to make changes in product characteristics packaging or availability at any time without notice e Screwdriver e 5 16 open end wrench INSTALLER HAZARD NOTIFICATION ORDERING INFORMATION WARNING Risk of injury or product damage Pillow Talk Lavatory Shelf scat aonb va mena eee K 7957 AA These products are not designed or intended for Portrait Lavatory Shelf ie a esa ayaa paca ae K 2229 AA use as a grab bar or support bar Do not install products in any critical support area WARNING Risk of injury or product damage Use extreme care while working with vitreous china products Vitreous china can break or chip if you overtighten screws or roughly handle the product TOOLS REQUIRED MATERIALS REQUIRED e Tape measure e Latex silicone caulk not supplied e 1 8 drill bit e 1 2 drill bit e Electric drill e Penci2. eal border between shelf and wall with latex silicone TON caulk See Fig 7 Allow sufficient caulk drying time before using shelf Fig 7 Kohler Co Kohler WI 3 112022 2 AA A SERVICE PARTS K 7957 AA K 2229 AA SERVICE PARTS SERVICE KITS ITEM PARTNO DESCRIPTION PART NO ITEM QTY DESCRIPTION 1 82558 Pillow Talk Lavatory Shelf 54650 Mounting Hardware Pack 2 54601 Toggle Anchor 2 2ea Toggle Anchor 3 81541 Flat Washer 3 2ea Flat Washer 4 81542 10 10 Slotted Hex Head Screw 4 2ea 14 10 Slotted Hex Head Screw 5 46027 25 20 Slotted Hex Head Bolt 5 2ea 25 20 Slotted Hex Head Bolt 6 83231 Portrait Lavatory Shelf 81456 Mounting Hardware Pack 7 81457 Toggle Anchor 7 2ea Toggle Anchor 8 81460 Flat Washer 8 2ea Flat Washer 9 81458 10 24 Slotted Hex Head Screw 9 2ea 10 24 Slotted Hex Head Screw 10 81459 10 24 Slotted Hex Head Bolt 10 2ea 10 24 Slotted Hex Head Bolt Fig 8 112022 2 AA A 4 Kohler Co Kohler WI
3. l e Spirit level ROUGHING IN DIMENSIONS 6 27 1 2 K 7957 AA 4 7 8 21 5 8 K 2229 AA 112022 2 AA A Copyright 1997 Kohler Co INSTALLATION MARK DESIRED LOCATION e Position shelf on wall at desired location Place spirit level gt gt J on top surface and level the shelf See Fig 2 Fig 2 ig With shelf in place mark the location of the mounting holes with a pencil Remove shelf from wall See Fig 3 DRILL PILOT HOLES Drill 1 8 pilot hole at each marked location If wall stud is drilled use screw and washer in place of toggle anchor for mounting If wall stud is not drilled a 1 2 hole for installation of toggle anchor is needed INSTALL TOGGLE ANCHOR Fold back metal toggle flat alongside the plastic straps Insert metal toggle anchor into the hole See Fig 4 Metal Toggle Toggle Anchor Fig 4 Pull ring and push cap to wall and snap off straps See Fig 5 112022 2 AA A 2 Kohler Co Kohler WI INSTALL SHELF Place shelf over toggle anchors in desired location Insert bolts and washers and tighten until snug against shelf Discard screws See Fig 6 If toggle anchors are not used place shelf over 1 8 pilot holes in desired location Insert screws and washers and tighten until snug against shelf Discard bolts Washer Fig 6 SEAL SHELF TO WALL S
Download Pdf Manuals
Related Search