Franklin Brass 2789PC Installation Guide
Contents
1. and 2 Bars onto Wall Flanges IMPORTANT Shelf and bars must be mounted on fittings in specified order below 1 Mount towel shelf D by sliding open ends of tubing onto the top 2 projecting fittings c on wall flanges A and B Secure towel shelf by inserting set screws E through the holes in the underside of the towel shelf near the wall flange and fasten set screws until the screw heads are flush see figure 2 2 Mount medium size towel bar F below towel shelf ned Sad slag k a Ai n 27107 i ne a as in stop number 1 www libertyhardware com see figure 3 Mount the small size towel bar G below medium EGE EMG AMASO ERNY towel bar onto the bottom 2 fitting of flange A amp B Made in Fabriqu en Hecho en China same way as in stop number 1 IMPORTANT To prolong the life of this product clean regularly with a soft damp cloth Do Not Use detergents or cleansers as they may be harmful to finish REQUIRED TOOLS 24 General Purpose Level Standard size phillips head screwdriver Standard size slotted screwdriver required for installation of toggle bolts in drywall CP2389 XXX2. INSTALLATION amp ASSEMBLY INSTRUCTIONS TOWEL SHELF WITH 2 BARS Part Installation of Towel Shelf item onto Wall 1 Installation of Wall Flanges A amp B on Walls with Wood Studs or Backing a Position one of the wall flanges A vertically on the wall at the desired c height using a level to make sure cae that the wall flange is straight Mark ee hole locations with nail or punch in centers of projecting fittings C 18 45 75cm see figure 1 lt __ or 24 61cm b Position the other wall flange B vertically on the wall see figure 1 for your center to center distance from wall flange A Figure 1 Use a level to make sure that the wall flange is straight and that both wall flanges align horizontally with each other Mark hole locations with nail or punch in centers of projecting fittings C see figure 1 After hole locations are marked remove wall flanges and drill 5 32 holes into studs or backing Mount wall flanges with 10 x 1 1 2 screws provided Make sure that set screw holes on the projecting fittings c are facing down O Qa z 2 Installation of Wall Flanges A amp B on Drywall a Same as 1 a b b After hole location are marked remove wall flanges and drill1 2 holes c Mount with 3 16 x 3 toggle bolts provided Make sure that set screw holes on the projecting fittings c are facing down Figure 2 Part ll Assembly of Towel Shelf
Download Pdf Manuals
Related Search