Barclay Products 4120-60-PB Installation Guide
Contents
1. Cellini Cat No ip gt Shower Offset Rod 4120 60 amp 4120 72 BARCLAY INSTALLATION INSTRUCTIONS Parts Included e 1 Straight Center Rod 2 Bent End Rods end pre plugged for flange 2 1 140 Plastic Inserts e 2 300 Flanges 8 Wood Screws 2 Set Screws Tools Needed e Small Blade Screwdriver Phillips Screwdriver Level Drill with 1 8 Bit e e Pipe Cutter Hacksaw FRO 1 Measure wall opening 2 Tap 140 insert halfway into straight rod on each end 3 Push left bent end rod onto straight rod until both ends meet 4 Lay connected rods on flat surface and assemble right bent end rod As in step 3 5 Measure rod You can cut ends up to 1 1 2 off each end 3 total to shorten rod You can increase size by sliding flange out up to 1 2 1 total For best results have rods extend into flange up to the end of the guides inside the flange 6 When desired size is achieved slide flanges on each end and install rod in opening Do Not use set screws yet 7 After rod is secured to walls use a level to make sure rod is level side to side and front to back Now install set screws A 1 8 pilot hole is recommended for optimum strength 12 4 07 P 847 244 1234 www barclayproducts com
Download Pdf Manuals
Related Search