Bell LHS100Z Installation Guide
Contents
1. WARNING Do not install near Flammable Material CAUTION Risk of Fire Electric Shock or Injury to Persons 1 Turn off power and install in accordance with local electrical codes 2 Thread lampholders into cover coat threads with sealing compound not included and tighten 3 Aimlampholder s to desired angle and tighten nut s on ball joint s 4 Wire the lampholder s to the supply lines in the box white to white neutral black to black hot and green to green ground 5 Donot touch the bulb at any time Use a soft cloth Oil from skin may damage bulb 6 Use only with a 75 watt or lower bulb 7 Do not touch hot lens bezel or enclosure 8 Close all unused holes with closure plugs 9 Seal all openings to comply with wet location installation 10 Use a caulking compound to provide a water tight seal between the luminaire and the mounting surface SAVE THESE IMPORTANT SAFETY INSTRUCTIONS Lighted lamp is HOT CAUTION Risk of Fire Electric Shock or Injury to Persons 1 Disconnect power and allow to cool before replacing bulb Bulb gets HOT quickly Do not touch hot lens guard or enclosure Do not remain in light if skin feels warm Do not look directly at lighted lamp Keep lamp away from materials that may burn Use only with a 75 watt type 4 or smaller bulb Do not touch the bulb at any time Use a soft cloth Oil from skin may damage bulb 8 Do not operate the product with a missing or2. damaged bezel lens or gasket 9 For outdoor use only SD NO HB W WY
Download Pdf Manuals
Related Search