Home

Hampton Bay 27133 Installation Guide

image

Contents

1. INSTALLATION INSTRUCTION FOR 4367 281 READ AND SAVE THESE INSTRUCTIONS ASSEMBLING THE FIXTURE Fig 2 1 Carefully remove the fixture from the carton and check that all parts are included as shown in the illustration 2 Remove the finial V and the frame W from the fixture nipple U 3 Install the light bulbs in accordance with the fixture s specification DO NOT EXCEED THE MAXIMUM WATTAGE RATING 4 Place the inner glass T onto the frame W then raise the frame W and the finial V into the fixture nippel U and turn until tight 5 Thread the rod K onto the nipple L 6 Attach upper end of the arm O to hub M using the screws N 7 Place the glass R into the fixture iron frame S HANGING THE FIXTURE Fig 1 8 Shut off the power at the circuit breaker and remove old fixture from ceiling including the mounting bar Thread the nipple E into the screw collar H until snug 10 Thread hex nut D onto nipple E Place lock washer C over end of nipple E protruding through mounting bar A and until tight 11 Thread other end of nipple E with loop attached into mounting bar A until snug 12 Take this mounting bar A assembly and mount to ceiling junction box with junction box screws B Tighten screws securely with screwdriver 13 Using proper chain pliers open one link of chain I and connect it to the fixture loop J Fig 2 14 By measuring determine connect number of links
2. needed for proper hanging height 15 Lace the fixture wires through the chain links Slip screw collar ring G over the chain then do the same with the canopy F 16 Open one link of the other end of the chain I and connect it to the ceiling loop H 17 Feed the fixture wires through the ceiling loop H and nipple E and pull until taut CONNECTING THE WIRES Fig 3 18 At this point connect the electrical wires as shown in Fig 3 making sure all wire nuts are secured You may have to wrap the connections with electrical tape If your outlet has a ground wire green or bare copper connect fixture s ground wire to it Otherwise connect fixture s ground wire directly to the mounting bar A using the green screw provided 19 Tuck these wire connections neatly into the ceiling junction box and then raise the canopy F all the way to the ceiling Fig 3 Raise the screw collar ring G and thread onto fixture loop H protruding through canopy F Fig 1 Fale FIXTURE FIXTURE e 20 Carefully raise fixture iron frame S with glass R installed smooth Ribbed Sieen or up and over the inner fixture body The loop P of arm O Copper will engage hook Q of the fixture iron frame S Repeat i for all three arms ee 21 Return power to the junction box and test the fixture Your WIRES ore installation is now complete Scie Coppenicround Notice It Is Important to use
3. proper chain pliers not included i To OPEN and CLOSE the chain included with this fixture Do nat SO alata american open them with other tools that may twist or stress the chain EAT font links It is important to use proper chain pliers like the ones Iang a shown in the diagram Associaton

Download Pdf Manuals

image

Related Search

Related Contents

Trust 18656  Sony VAIO VPCSE2KGX/B notebook  C:\Documents and Settings\Administrator\桌面\XT009英文说明书  Benutzerhandbuch PZ178D - Physik Instrumente (PI)  TeaFusion user manual EN.indb  InLine 23173A holder  Jabra Pro 920 - User Manual  TV Ears DRI-DOCK User's Manual  Gefen EXT-DVI-2-HDSDISP DVI to HD-SDI PLUS Scaler Box EXT-DVI-2  66-1190-03_C YP900A Delphi Combustion  

Copyright © All rights reserved.
Failed to retrieve file