none XXCI-CR Instructions / Assembly
Contents
1. 3 SPEED OSCILLATING DESK FAN OPERATING INSTRUCTIONS Please Read and Save These Instructions SAFETY PRECAUTIONS When lifting fan do not carry by fan cage or motor housing Only lift by goose neck arm or base Lifting the fan by its cage or motor housing will damage the oscillating mechanism gt WARNING Disconnect source of electrical power by removing the fuse or switching off circult breakers Always unplug fan before cleaning or moving to another location To avoid overturning always place fan on a flat level surface Do not use fan in wet conditions or areas of high humidity Do not insert objects through guard bars Do not alter angle of fan blades Do not use this fan if any parts are damaged or missing Ifthe main electrical leads are damaged they should only be replaced by a qualified electrician This appliance has a polarized plug one blade is wider than the other To reduce the risk of electric shock this plug is intended to fit in a polarized outlet only one way If the plug does not fit fully in the outlet reverse the plug If it still does not fit contact a qualified electrician Do not attempt to defeat this safety feature This product employs overload protection fuse A blown fuse indicates an overload or short circuit situation If the fuse blows unplug the product from the outlet Replace the fuse as per the user servicing instructions follow product marking for proper fuse ratin2. g and check the product If the replacement fuse blows a short circuit may be present and the product should be discarded or returned to an authorized service facility for examination and or repair Risk of fire Do not replace attachment plug Contains a safety device fuse that should not be removed Discard product if the attachment plug is damaged Do not operate any fan with a damaged cord or plug Discard fan or return to an authorized service facility for examination and or repair l Do not run cord under carpeting Do not cover cord with throw rugs runners or similar coverings Do not route cord under furniture or appliances Arrange cord away from traffic area and where it will not be tripped over WARNING To Reduce The Risk Of Fire Or Electric Shock Do Not Use This Fan With Any Solid State Speed Control Device SUITABLE FOR USE IN DAMP LOCATIONS OPERATING INSTRUCTION 1 Ensure the slide switch is in the OFF position O Plug electrical cord into a 120v outlet 2 Use the large switch to select the desired speed as follows HIGH Speed MED Speed LOW Speed OFF 3 For oscillating operation use the smaller switch to select oscillating or Stop oscillation es SL USER SERVICING INSTRUCTIONS REPLACE THE FUSE l j CAUTION Grasp plug and remove from the receptacle or other outlet device Do not unplug by pulling on cord Step 1 Use flat screwdriver to move the Plastic Cover out and then remove
3. the fuse FIG 1 Step 2 Replace a new fuse by using flat screwdriver FIG 2 WARNING Risk of fire Replace fuse only with 2 5 Amp 125 Volt fuse Step 3 Push the Plastic Cover back F1G 3 Flat screwdriver FIG 4 Fuse Plastic cover
Download Pdf Manuals
Related Search