Kenroy Home 90521PN Instructions / Assembly
Contents
1. MODEL 90521PN PACKING DIAGRAM No MOM THIS SCONCE CAN BE MOUNTED UP OR DOWN AVAILABLE PART IS 90521GS GLASS SHADE GLASS SHADE WIRE 905216S CONNECTOR 3 REPLACEMENT PART OGRET OUNTING HOLE 8 32 SCREWS SUPPLIED WITH BOX OUNTING PLATE WHITE SUPPLY WIRE SUPPLY GROUND WIRE SMALL SCREW OUTLET BOX 2 Pes FRONT VIEW GREEN GROUND SCREW FIXTURE WALL INSTALLATION INSTRUCTIONS GROUND READ AND SAVE THESE INSTRUCTIONS READ INSTRUCTIONS ALL THE WAY THROUGH PRIOR TO ASSEMBLY THIS SCONCE SHOULD TAKE APPROXIMATELY 5 MINUTES TO ASSEMBLE MAKE SURE ALL PARTS ARE FIRMLY TIGHTENED CAUTION TO AVOID POSSIBLE ELECTRIC SHOCK MAKE SURE THE ELECTRICITY IS SHUT OFF AT THE MAIN PANEL IF YOU ARE REPLACING AN EXISTING FIXTURE FIRST TURN THE FIXTURE OFF NEXT TURN THE WALL SWITCH OFF FINALLY GO TO THE MAIN FUSE OR BREAKER BOX IN YOUR HOME TURN THE FUSE OR BREAKER TO THE OFF POSITION SOME TYPES OF FUSES MUST BE UNSCREWED TO SHUT OFF THE POWER ALL WIRING MUST BE DONE IN ACCORDANCE WITH NATIONAL AND LOCAL ELECTRIC CODES IF YOU DO NOT HAVE ELECTRICAL WIRING EXPERIENCE HAVE YOUR FIXTURE INSTALLED BY A QUALIFIED LICENSED ELECTRICIAN THIS FIXTURE IS TO BE MOUNTED TO A UL LISTED OUTLET BOX CAPABLE OF SUPPORTING THE WEIGHT OF THIS FIXTURE THE OUTLET BOX MUST BE DIRECTLY SUPPORTED BY THE BUILDING STRUCTURE TOOLS YOU WILL NEED THE FOLLOWING TOOLS OR EQUIPMENT SCREWDRIVER PLIERS ADJUSTABLE WRENCH UNPACK THE FIXT2. OT INCLUDED INTO SOCKET 6 RESTORE POWER YOUR NEW FIXTURE IS NOW READY TO USE 02 2011 90521 INSTRUCTIONS
3. URE YOU SHOULD HAVE RECEIVED THE FOLLOWING PARTS IN THE PACKAGE BACKPLATE ASSEMBLY GLASS SHADE SOCKET RING HARDWARE PACK MOUNTING PLATE 2 8 32 x 1 1 4 SCREWS 2 SMALL SCREWS 3 WIRE CONNECTORS GREEN GROUND SCREW TO PROTECT THE FINISH PLACE ALL PARTS ON A SOFT SURFACE INSTALL THE FIXTURE 1 ATTACH MOUNTING PLATE TO OUTLET BOX USING TWO SCREWS PROVIDED WITH THE OUTLET BOX NOTE IF THE SCREWS WITH THE OUTLET BOX ARE TOO SHORT USE THE 2 8 32 x 1 1 4 SCREWS PROVIDED IN THE MOUNTING HARDWARE PACKAGE IMPORTANT NOTE MAKE SURE ONE OF THE MOUNTING HOLES IN THE MOUNTING PLATE IS FACING UPWARDS 2 CONNECT THE WHITE OR RIBBED FIXTURE WIRE TO THE WHITE SUPPLY WIRE IN THE OUTLET BOX USING THE TWIST ON WIRE CONNECTOR PROVIDED CONNECT THE BLACK OR SMOOTH FIXTURE WIRE TO THE BLACK SUPPLY WIRE IN THE SAME MANNER INSTALL THE FIXTURE GROUND WIRE UNDER THE GREEN GROUND SCREW ON THE MOUNTING PLATE THEN CONNECT THE FIXTURE GROUND WIRE TO THE SUPPLY GROUND WIRE IN THE OUTLET BOX USING THE TWIST ON WIRE CONNECTOR PROVIDED 3 RAISE FIXTURE TO THE WALL AND CAREFULLY TUCK THE WIRES INSIDE THE OUTLET BOX SPREAD THE ELECTRICAL SPLICES SO THAT THE BLACK WIRES ARE ON ONE SIDE OF THE OUTLET BOX AND THE WHITE WIRES ARE ON THE OTHER SIDE LINE UP THE HOLES IN BACKPLATE WITH HOLES IN MOUNTING PLATE AND SECURE WITH 2 SMALL SCREWS 4 PLACE GLASS SHADE OVER SOCKET AND SECURE WITH SOCKET RING 5 INSTALL A 100 WATT MAX MEDIUM BASE TYPE A BULB N
Download Pdf Manuals
Related Search