Kenroy Home 10063ORB Installation Guide
Contents
1. BACKPLATE AND SECURE WITH 2 FINIALS 4 PLACE SHADE OVER SOCKET AND SECURE WITH SOCKET RING 5 INSTALL A 100 WATT MAX MEDIUM BASE TYPE A BULB NOT INCLUDED INTO SOCKET 6 RESTORE POWER YOUR NEW FIXTURE IS NOW READY FOR USE 02 2011 100630RB INSTALLATION2. MODEL 10063 PACKING DIAGRAM STYROFOAM 12 KGS 3 WIRE CONNECTORS AND 2 5 BACKPLATE ASSEMBLY AND SOCKET RING WIRE CONNECTOR THIS SCONCE CAN MOUNTED UP OR DOWN ACKPLATE 3 PcS 8 32 SCREWS SUPPLIED WITH AVAILABLE PART 5 OUNTING PLATE 100635 SHADE 2 NUTS 2 8 32 1 1 4 SCREWS BLACK SUPPLY WIRE WHITE SUPPLY WIRE SUPPLY GROUND WIRE SOCKET RIN GROUND OUTLET BOX WIRE WHITE SHADE 10063SH FIXTURE WIRE REPLACEMENT PART INIAL 2 PCS INSTALLATION INSTRUCTIONS READ AND SAVE THESE INSTRUCTIONS READ INSTRUCTIONS ALL THE WAY THROUGH PRIOR TO ASSEMBLY THIS LAMP SHOULD APPROXIMATELY 10 MINUTES TO ASSEMBLE MAKE SURE ALL PARTS ARE FIRMLY TIGHTENED CAUTION TO AVOID POSSIBLE ELECTRIC SHOCK MAKE SURE THE ELECTRICITY IS SHUT OFF AT THE MAIN PANEL IF YOU REPLACING EXISTING FIXTURE FIRSTLY TURN THE FIXTURE OFF NEXT TURN THE WALL SWITCH OFF FINALLY GO TO THE MAIN FUSE OR BREAKER BOX IN YOUR HOME TURN THE FUSE OR BREAKER TO THE OFF POSITION SOME TYPES OF FUSES MUST BE UNSCREWED TO SHUT OFF THE POWER ALL WIRING MUST BE DONE IN ACCORDANCE WITH NATIONAL AND LOCAL ELECTRIC CODES F YOU DO NOT HAVE ELECTRICAL WIRING EXPERIENCE HAVE YOUR FIXTURE INSTALLED BY A QUALIFIED LICENSED ELECTRICIAN THIS FIXTURE IS TO BE MOUNTED TO A UL LISTED OUTLET BOX CAPABLE OF SUPPORTING THE WEIGHT OF THIS FIXTURE THE OUTLET BOX M
3. UST BE DIRECTLY SUPPORTED BY THE BUILDING STRUCTURE TOOLS YOU WILL NEED THE FOLLOWING TOOLS OR EQUIPMENT SCREWDRIVER PLIERS ADJUSTABLE WRENCH UNPACK THE FIXTURE YOU SHOULD HAVE RECEIVED THE FOLLOWING PARTS IN THE PACKAGE BACKPLATE ASSEMBLY SHADE AND SOCKET RING HARDWARE MOUNTING PLATE 4 8 32 x 1 1 4 SCREWS 2 NUTS 3 WIRE CONNECTORS GREEN GROUND 2 FINIALS TO PROTECT THE FINISH PLACE ALL PARTS ON A SOFT SURFACE INSTALL THE FIXTURE 1 INSERT 2 8 32 x 1 1 4 SCREWS INTO MOUNTING PLATE TO LINE UP WITH HOLES IN BACKPLATE ATTACH MOUNTING PLATE TO OUTLET BOX USING TWO SCREWS PROVIDED WITH THE OUTLET BOX NOTE IF THE SCREWS WITH THE OUTLET BOX ARE TOO SHORT USE THE 2 8 32 x 1 1 4 SCREWS PROVIDED IN THE MOUNTING HARDWARE PACKAGE 2 CONNECT THE WHITE RIBBED FIXTURE WIRE TO THE WHITE SUPPLY WIRE IN THE OUTLET BOX USING THE TWIST ON WIRE CONNECTOR PROVIDED CONNECT THE BLACK OR SMOOTH FIXTURE WIRE TO THE BLACK SUPPLY WIRE IN THE SAME MANNER INSTALL THE FIXTURE GROUND WIRE UNDER THE GREEN GROUND SCREW ON THE MOUNTING PLATE THEN CONNECT THE FIXTURE GROUND WIRE TO THE SUPPLY GROUND WIRE IN THE OUTLET BOX USING THE TWIST ON WIRE CONNECTOR PROVIDED 3 RAISE FIXTURE TO THE WALL AND CAREFULLY TUCK THE WIRES INSIDE THE OUTLET BOX SPREAD THE ELECTRICAL SPLICES SO THAT THE BLACK WIRES ARE ON ONE SIDE OF THE OUTLET BOX AND THE WHITE WIRES ARE ON THE OTHER SIDE LINE UP SCREWS WITH HOLES IN
Download Pdf Manuals
Related Search