Designers Fountain HC0349 Installation Guide
Contents
1. ASSEMBLY AND INSTALLATION Continued 6 Place the COVER PLATE 13 onto the FIXTURE MOUNTING SCREWS 14 and secure it into place using the DECORATIVE NUTS 16 provided ee 7 L he GLASS HOLDE SCREW 17 he GLASS HOLDER 18 Then i h Loosen the on the i en insert the ASSEMBLY amp INSTALLATION GLASS SHADE 19 all the way into the GLASS HOLDER 18 and finger tighten the INSTRUCTIONS GLASS HOLDE SCREW 17 to hold the GLASS SHADE 19 8 Screw light bulbs into the sockets and make sure they do not exceed the maximum wattage Please read carefully and save these instructions as you may need them at a later specified on the fixture s wattage rating label date CAUTION INSTALLATION IS NOW COMPLETED Turn off the main power at the circuit breaker before installing the fixture in order to prevent possible shock GENERAL All electrical connections must be in accordance with local and National Electrical Code N E C standards If you are unfamiliar with proper electrical wiring connections obtain the services of a qualified electrician Remove the fixture and the mounting package from the box and make sure that no parts are missing by referencing the illustrations on the installation instructions ASSEMBLY AND INSTALLATION 1 At the center of the BACK PLATE 2 there are eight perforated slots Knock out the set matches your OUTLET BOX 1 2 Screw the 8 32 FIXTURE MOUNTING SCREWS 14 into the BACK PLATE 2 and threa2. E CONNECTOR 11 not included Place wiring and connections inside the OUTLET BOX 1
3. d the 8 32 HEX NUTS 15 onto the FIXTURE MOUNTING SCREWS 14 as shown Secure the position of the FIXTURE MOUNTING SCREWS 14 by tightening the HEX NUTS 15 against the BACK PLATE 2 3 Carefully pass the OUTLET BOX 1 wires and the SUPPLY GROUND WIRE 6 through hole in the center of the BACK PLATE 2 Secure the BACK PLATE 2 to the OUTLET BOX 1 with MOUNTING SCREWS 3 4 Itis advisable to anchor the BACK PLATE 2 to the wall by using the set of holes at each end of the BACK PLATE 2 and the BACK ANCHOR SCREWS 4 or your own wood screws toggle bolts plastic anchors etc Screws not provided on all models OUTLET BOX SMOOTH OR BLACK FIXTURE LEAD WIRE 5 Attach the BLACK SUPPLY WIRE 9 to the SMOOTH or BLACK FIXTURE BACK PLATE WIRE CONNECTOR LEAD WIRE 10 by using the WIRE CONNECTOR 11 At the same manner H ee ee SCREW attach the WHITE SUPPLY WIRE 7 to the RIBBED or WHITE FIXTURE ee er URE Se LEAD WIRE 8 Loop the FIXTURE GROUND WIRE 5 around the SUPPLY GROUND WIRE 48 39 HEX NUT GROUND SCREW 12 of the BACK PLATE 2 Note Be sure to provide an _ WHITE SUPPLY WIRE DECORATIVE NUT extra 3 length of the FIXTURE GROUND WIRE 5 for connection to the RIBBED OR WHITE FIXTURE LEAD WIRE GLASS HOLDE SCREW SUPPLY GROUND WIRE 6 Tighten the GROUND SCREW 12 Connect BLACK SUPPLY WIRE GLASS HOLDER the remaining FIXTURE GROUND WIRE 5 to the SUPPLY GROUND WIRE GLASS SHADE 6 using a WIR
Download Pdf Manuals
Related Search