none 32323MBRZ Installation Guide
Contents
1. ITH RUBBER WASHER AND FINIAL 9 INSTALL A 150 WATT MAXIMUM MEDIUM BASE TYPE A 3 WAY BULB NOT INCLUDED INTO SOCKET 10 THE INTO AN OUTLET AND TURN ON AT SWITCH BULB REPLACEMENT 1 BEFORE REPLACING THE BULB BE SURE THAT THE SHADE AND BULB ARE COOL AND LAMP IS UNPLUGGED 2 UNSCREW EXISTING BULB FROM SOCKET AND REPLACE WITH A NEW BULB PLUG POWER SUPPLY CORD BACK INTO OUTLET TROUBLE SHOOTING 1 IF YOUR LAMP DOES NOT LIGHT CHECK PLUG AT THE OUTLET MAKE SURE THE PLUG IS FULLY AND PROPERLY INSERTED INTO THE 2 IF LAMP 0065 UNPLUG FROM OUTLET CHECK THE BULB FOR A BROKEN FILAMENT REPLACE BULB IF NECESSARY PLUG IN LAMP AND TURN IT ON 3 IF THE LAMP STILL DOES NOT LIGHT PLEASE CONTACT YOUR DISTRIBUTOR OR PLACE OF PURCHASE IMPORTANT SAFETY INSTRUCTIONS THIS PORTABLE LAMP HAS A POLARIZED PLUG ONE BLADE IS WIDER THAN THE OTHER AS A FEATURE TO REDUCE THE RISK OF ELECTRIC SHOCK THIS PLUG WILL FIT IN A POLARIZED OUTLET ONLY ONE WAY IF THE PLUG DOES NOT FIT FULLY IN THE OUTLET REVERSE THE PLUG IF IT STILL DOES NOT FIT CONTACT QUALIFIED ELECTRICIAN NEVER USE WITH AN EXTENSION CORD UNLESS PLUG CAN BE FULLY INSERTED DO NOT ALTER THE PLUG 32325 7 INSTRUCTIONS2. MODEL 52525 PACKING amp RUBBER SOCKET ASSEMBLY 12 5 12 5 4 Q INIAL rVUBBER WASHER SHADE 32323SHMBRZ REPLACEMENT PART HARP LWHARP 8 PB REPLACEMENT SOCKET AVAILABLE 5 LWHARP 8 PB 32323SHMBRZ 04 2015 ASSEMBLY INSTRUCTIONS READ AND SAVE THESE INSTRUCTIONS READ INSTRUCTIONS ALL THE WAY THROUGH PRIOR TO ASSEMBLY IHIS LAMP SHOULD TAKE APPROXIMATELY 10 MINUTES TO ASSEMBLE MAKE SURE ALL PARTS ARE FIRMLY TIGHTENED UNPACK THE LAMP YOU SHOULD HAVE RECEIVED THE FOLLOWING PARTS IN THE PACKAGE FINIAL RUBBER WASHER SHADE HARP SOCKET ASSEMBLY UPPER POLE MIDDLE POLE LOWER POLE AND BASE TO PROTECT THE FINISH PLACE ALL PARTS ON A SOFT SURFACE ASSEMBLE THE LAMP 1 CAREFULLY ORGANIZE AND PLACE ALL PARTS 5 FLAT SURFACE LINE UP ALL OF THE PARTS ACCORDING TO THE ASSEMBLY 2 SCREW LOWER POLE TO TOP OF THE BASE 3 SCREW MIDDLE POLE TO TOP OF THE LOWER POLE 4 SCREW UPPER POLE TO TOP OF THE MIDDLE POLE 5 PULL THE EXCESS POWER THROUGH BASE 6 SCREW SOCKET ASSEMBLY TO TOP OF THE UPPER POLE 7 SQUEEZE LEGS OF THE HARP TOGETHER AND INSERT THE TWO ENDS BETWEEN THE PRONGS OF THE HARP HOLDER 8 PLACE SHADE ONTO HARP THEN SECURE W
Download Pdf Manuals
Related Search