Warehouse of Tiffany RL1023C Instructions / Assembly
Contents
1. ASSEMBLY INSTRUCTIONS MODEL RL1023C TE Only the technical personnel can be allovto fix and aaintain IMPORTANT ake sure that the pover is switch off at the electricity mains supply before mencing vork Viredrawing lampshade 18 stii be fiumi on the Main body pipo 17 above it final rnhood 16 aad serow on the eryatal rings 7 Take out screw 4 and rotate it into crystal lifting ring 7 at least 6mm and en tightened with washer 6 hexagonal nut 5 Rotate the one nut of screw A till close to the first nut and then rotate screw into batten 13 Make sure screw 4 should go through batten 13 Use outlet box screws 14 to fix batten 13 on outlet box 1 Take out ring cover 9 from crystal lifting ring 7 and then let the canopy 8 row exystal Lifting ring 7 Adjust the crystal lifting ring to a certain jaht Tighten the nut to fix on batten 13 in the right position Ground Connection See picture 1 there are one tapping hole amp two dimples nd the supply ground wire 2 on the green ground screw 15 and then put it into ping hole Consect the fixture ground wire 3 with supply ground wire 2 by mecting terminal 12 Caution DO NOT connect ground wire with supply pover re Connect fixture supply wire 10 with power supply wire 11 Caution Resesber distinguish the positive and negative charges Seo picture 2 Push canopy 8 up to the ceiling Attach ring cover 9 on crystal Lifting ring and f2. ix canopy 8 as well Put shade 18 on holder and tightened with out ring Serew bulb in the holder EPLACEMENT BULB not exceed the maxima wattage ght bulbs recomended RLIO2IC E12 3 x 40 Max Type B LEANING CARE ean with a soft dry cloth AFETY INFORMATION Lamp used must in rated voltage and do not touch the bulb with bare hands ways svitch off the electricity supply and allow to cool for 10 minutes before anging the Light bulbs If the external cables have been demaged Pls change or repair by manufacturer or rvice agency or professional electrician In erder to avoid the danger
Download Pdf Manuals
Related Search