Warehouse of Tiffany RL9795 Instructions / Assembly
Contents
1. ASSEMBLY INSTRUCTIONS MODEL RL9795 NOTE Only the technical person can be allowed to fix and maintain IMPORTANT Make sure that thelPower is switched off at the electricity aains supply before commencing work FIXING INSTRUCTIONS 1 Take out screw 4 and rotate it into crystal Lifting ring 7 at least Gan and wn tightened with washer 6 hexagonal mut 5 2 Rotate the nut of scree 4 till close to the first mut and then rotate screw 4 into batten 11 Make sure screw 4 should go through batten 1 43 Use outlet box screws 12 to fix batten 11 on outlet bor 1 4 Tighten the nut to fix on batten 11 in the right position 5 Ground Connection See picture 1 there are one tapping hole amp two diaples Wind the supply ground wire 2 on the green ground screw 15 and then pot it into tapping hole Connect the fixture ground wire 3 with supply ground wire 2 by connecting terminal 10 Caution DO NOT connect ground wire with supply power vire 6 Connect fixture supply wire 7 with pover supply wire 9 Caution Resoaber to distinguish the positive and negative charges See picture 2 T Push canopy 8 up to the ceiling 8 Screw bulb 16 in the holder REPLACEMENT BULB Do not exceed the maximum wattage Light bulbs recommended RL9795 E12 5 x 60W Max Type B CLEANING CARE Clean with a soft dry cloth SAFETY INFORMATION 1 Lamp used aust in rated voltage and do not touch the bulb w2. ith bare hands Always switch off the electricity supply and allow to cool for 10 minutes before changing the light bulbs 2 If the external cables have been demaged Pls change or repair by manufacturer or service agency or professional electrician In order to avoid the danger L Ostler be 2 Supply S Fixture s A Screw S Hexagonal 6 Washer T Pixture E Canopy 9 Power sup 10 Connect 1 Batten 12 Outlet b 13 Sorens 14 Batten 15 Green an 16 Bulb
Download Pdf Manuals
Related Search