Eco Lighting by DSI 16492 Installation Guide
Contents
1. Otherwise re move these as needed Please dispose of lamps and ballast properly See ILL 2 C4 Contents 1 LED Door Retrofit Retrofit Kit LED Door Frame See ILL 1 2 Side Mounting Brackets N ILL 1 LDR r a a a Instructions 1 Disconnect power to fixtures 2 Remove existing door frame and lamps If clearance permits abandon ballast and socket 3 Lift luminaire housing and slide in both ae and Teron Side Mounting Bia pe THE RETROFIT ASSEMBLY IS ACCEPTED AS A COMPONENT OF A een luminaire and T grid See Ill 3 Lower R E pele LUMINAIRE WHERE THE SUITABILITY OF THE COMBINATION SHALL BE DETERMINED BY UL OR AUTHORITIES HAVING HAV ING JURISDICTION 4 Slide the adjustable hinges and latches on the LDR kit to match the existing door frame See ILL 4 amp 5 Please dispose of existing door frame afterwards properly 5 Hang the LDR by its hinges on the existing fixture See Ill 6 Fixture Housing 6 Install power disconnect pre attached to supplied cord to main power cord coming into the fixture See ILL 7 Mounting Bracket Ceiling T Bar a 7 Wire the existing fixture s ground along with the main power ground to the supplied three wire lever nut attached to the supplied cord 8 OPTIONAL If required attach the safety chains via supplied S Hooks 9 Close the LDR and secure the latches 10 Reconnect main power a at2. CN 8 H Ni Eco Lighting LED Door Bracket Retrofit Kit Installation Instructions Installation instructions for converting a 2 x 4 recessed troffer lensed fluorescent luminaire to LED WARNING Risk of fire or electric shock Luminaire wiring and electrical parts may be damaged when drilling for installation of LED retrofit kit Check for enclosed wiring and components WARNING Risk of fire or electric shock LED Retrofit Kit installation requires knowledge of luminaires electrical systems If not qualified do not attempt installation Contact a qualified electrician WARNING Risk of fire or electric shock Install this kit only in the luminaires that have the construction features and dimensions shown in the photographs and or drawings WARNING To prevent wiring damage or abrasion do not expose wiring to edges of sheet metal or other sharp objects WARNING Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLA TION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED THE RETROFIT ASSEMBLY IS ACCEPTED AS A COMPONENT OF A LUMINAIRE WHERE THE SUITABILITY OF THE COMBINATION SHALL BE DETERMINED BY UL OR AUTHORITIES HAV ING JURISDICTION ILL 2 i A a Door Frame Existing Lens Louver Fixture bars inside the existing fixture
3. j Wires from LED ILL 7 Wires from Driver Supply White a White For Customer Service ILL 6 Call 1 800 388 6141 ext 216 Black M F 9 30 3 p m EST Black
Download Pdf Manuals
Related Search