Kenroy Home 32491CH Installation Guide
Contents
1. MODEL 52491 PACKING DIAGRAM cwsoo J INNER BOX FOR SHADE SOCKET ASSEMBLY STYROFOAM 12 KGS CARDBOAR CA TITLE 20 INIAL HARP amp RUBBER WASHER ARDBOARD POLPE 2 P TrFINIAL RUBBER WASHER SHADE 32491SHCH REPLACEMENT PART HARP WHARP 8 CH REPLACEMENT ASSEMBLY PPER POLE AVAILABLE PARTS ARE 32491SHCH SHADE LWHARP 8 CH HARP 05 2014 ASSEMBLY INSITRUCITIONS READ AND SAVE THESE INSTRUCTIONS READ INSTRUCTIONS ALL THE WAY THROUGH PRIOR TO ASSEMBLY THIS LAMP SHOULD TAKE APPROXIMATELY 10 MINUTES TO ASSEMBLE MAKE SURE ALL PARTS ARE FIRMLY TIGHTENED UNPACK THE LAMP YOU SHOULD HAVE RECEIVED THE FOLLOWING PARTS IN THE PACKAGE FINIAL RUBBER WASHER SHADE HARP SOCKET ASSEMBLY 2 POLES AND BASE TO PROTECT THE FINISH PLACE ALL PARTS ON A SOFT SURFACE ASSEMBLE THE LAMP 1 CAREFULLY ORGANIZE AND PLACE ALL PARTS ON A SMOOTH FLAT SURFACE LINE UP ALL OF THE PARTS ACCORDING TO THE ASSEMBLY DIAGRAVM 2 SCREW THE LOWER POLE TO TOP OF THE BASE SCREW THE UPPER POLE TO TOP OF THE LOWER POLE 5 4 PULL THE EXCESS POWER CORD THROUGH THE BASE 5 SCREW THE SOCKET ASSEMBLY TO TOP OF THE UPPER POLE 6 SQUEEZE LEGS OF THE HARP TOGETHER AND INSERT THE TWO ENDS BETWEEN THE PRONGS OF THE HARP HOLDER 7 PLACE SHADE ONTO HARP AND THEN SECURE WITH RUBBER WASHER AND FINIAL 8 INSTALL A 150 WATT MAXIMUM MEDIUM BASE TYPE A 3 WAY B2. ULB NOT INCLUDED INTO SOCKET 9 PLUG THE POWER CORD INTO AN OUTLET AND TURN ON AT SWITCH BULB REPLACEMENT 1 BEFORE REPLACING THE BULB BE SURE THAT THE SHADE AND BULB ARE COOL AND LAMP IS UNPLUGGED 2 UNSCREW EXISTING BULB FROM SOCKET AND REPLACE WITH A NEW BULB PLUG POWER SUPPLY CORD BACK INTO OUTLET TROUBLE SHOOTING 1 IF YOUR LAMP DOES NOT LIGHT CHECK PLUG AT THE OUTLET MAKE SURE THE PLUG IS FULLY AND PROPERLY INSERTED INTO THE POWER OUTLET 2 IF LAMP STILL DOES NOT LIGHT UNPLUG FROM OUTLET CHECK THE BULB FOR A BROKEN FILAMENT REPLACE BULB IF NECESSARY PLUG IN LAMP AND TURN IT ON 3 IF THE LAMP STILL DOES NOT LIGHT PLEASE CONTACT YOUR DISTRIBUTOR OR PLACE OF PURCHASE IMPORTANT SAFETY INSTRUCTIONS THIS PORTABLE LAMP HAS A POLARIZED PLUG ONE BLADE IS WIDER THAN THE OTHER AS A FEATURE TO REDUCE THE RISK OF ELECTRIC SHOCK THIS PLUG WILL FIT IN A POLARIZED OUTLET ONLY ONE WAY IF THE PLUG DOES NOT FIT FULLY IN THE OUTLET REVERSE THE PLUG IF IT STILL DOES NOT FIT CONTACT A QUALIFIED ELECTRICIAN NEVER USE WITH AN EXTENSION CORD UNLESS PLUG CAN BE FULLY INSERTED DO NOT ALTER THE PLUG 32491CH INSTRUCTIONS
Download Pdf Manuals
Related Search