Kenroy Home 32603ORB Instructions / Assembly
Contents
1. O O lt A 12 Q O lt S RUBBER WASHER SHADE 32603SHORB REPLACEMENT PART HARP HARP8 REPLACEMENT PPER POLE 2 PCS PPER NIPPLE 2 PCS PIN IDDLE POLE 2 PCS OUPLING 2 PCS LOWER NIPPLE 2 PIN HOWER POLE 2 PCS BASE ETAL WASHER 2 PCS 2 PCS AVAILABLE PART ARE 32603SHORB SHADE HARP8 HARP 11 2014 ASSEMBLY INSTRUCTIONS READ AND SAVE THESE INSTRUCTIONS READ INSTRUCTIONS ALL THE WAY THROUGH PRIOR TO ASSEMBLY THIS LAMP SHOULD TAKE APPROXIMATELY 15 MINUTES TO ASSEMBLE MAKE SURE ALL PARTS ARE FIRMLY TIGHTENED UNPACK THE LAMP YOU SHOULD HAVE RECEIVED THE FOLLOWING PARTS IN THE PACKAGE FINIAL RUBBER WASHER CLAMP SHADE HARP UPPER POLE ASSEMBLY 4 POLES 4 NIPPLES 2 COUPLINGS BASE METAL WASHER 2 NUTS WRENCH TO PROTECT THE FINISH PLACE ALL PARTS ON A SOFT SURFACE ASSEMBLE THE LAMP 1 CAREFULLY ORGANIZE AND PLACE ALL PARTS ON A SMOOTH FLAT SURFACE LINE UP ALL OF THE PARTS ACCORDING TO THE ASSEMBLY DIAGRAM 2 SCREW 2 UPPER NIPPLES TO BOTTOM OF THE UPPER POLES 3 SLIDE 2 MIDDLE POLES OVER THE UPPER NIPPLES MAKE SURE THE PINS WERE INSERTED INTO THE HOLES IN UPPER POLES 4 SCREW 2 LOWER NIPPLES TO THE COUPLINGS ON BOTTOM OF THE UPPER NIPPLES 5 SLIDE 2 LOWER POLES OVER THE LOWER NIPPLES MAKE SURE THE PINS WERE INSERTED INTO TH2. E HOLES IN MIDDLE POLES 6 INSERT END OF THE LOWER NIPPLES INTO THE HOLES IN BASE THEN SECURE WITH 2 METAL WASHERS AND 2 NUTS WRENCH INCLUDED 7 SQUEEZE LEGS OF THE HARP TOGETHER AND INSERT THE TWO ENDS BETWEEN THE OF THE HARP HOLDER 8 PLACE SHADE ONTO HARP THEN SECURE WITH CLAMP RUBBER WASHER AND FINIAL 9 INSTALL A 150 WATT MAXIMUM MEDIUM BASE TYPE A BULB NOT INCLUDED INTO SOCKET 10 PLUG THE POWER CORD INTO AN OUTLET AND TURN ON AT SWITCH BULB REPLACEMENT 1 BEFORE REPLACING THE BULB BE SURE THAT THE SHADE AND BULB ARE COOL AND LAMP IS UNPLUGGED 2 UNSCREW EXISTING BULB FROM SOCKET AND REPLACE WITH A NEW BULB PLUG POWER SUPPLY CORD BACK INTO OUTLET TROUBLE SHOOTING 1 IF YOUR LAMP DOES NOT LIGHT CHECK PLUG AT THE OUTLET MAKE SURE THE PLUG IS FULLY AND PROPERLY INSERTED INTO THE POWER OUTLET 2 IF LAMP STILL DOES NOT LIGHT UNPLUG FROM OUTLET CHECK THE BULB FOR A BROKEN FILAMENT REPLACE BULB IF NECESSARY PLUG IN LAMP AND TURN IT ON 3 IF THE LAMP STILL DOES NOT LIGHT PLEASE CONTACT YOUR DISTRIBUTOR OR PLACE OF PURCHASE IMPORTANT SAFETY INSTRUCTIONS THIS PORTABLE LAMP HAS A POLARIZED PLUG ONE BLADE IS WIDER THAN THE OTHER AS A FEATURE TO REDUCE THE RISK OF ELECTRIC SHOCK THIS PLUG WILL FIT IN A POLARIZED OUTLET ONLY ONE WAY IF THE PLUG DOES NOT FIT FULLY IN THE OUTLET REVERSE THE PLUG IF IT STILL DOES NOT FIT CONTACT A QUALIFIED ELECTRICIAN NEVER USE WITH AN EXTEN
3. SION CORD UNLESS PLUG CAN BE FULLY INSERTED DO NOT ALTER THE PLUG 506030 INSTRUCTIONS
Download Pdf Manuals
Related Search