Kenroy Home 32594BRZ Installation Guide
Contents
1. 7 SQUEEZE LEGS OF THE HARP TOGETHER AND INSERT THE TWO ENDS BETWEEN THE PRONGS OF THE HARP HOLDER 8 PLACE SHADE ONTO HARP THEN SECURE WITH RUBBER WASHER AND FINIAL 9 INSTALL 150 WATT MAXIMUM MEDIUM BASE TYPE A BULB NOT INCLUDED INTO THE SOCKET 10 PLUG THE POWER CORD INTO AN OUTLET AND TURN ON AT SWITCH BULB REPLACEMENT 1 BEFORE REPLACING THE BULB BE SURE THAT THE SHADE AND BULB ARE COOL AND LAMP IS UNPLUGGED 2 UNSCREW EXISTING BULB FROM SOCKET AND REPLACE WITH A NEW BULB PLUG POWER SUPPLY CORD BACK INTO OUTLET TROUBLE SHOOTING 1 IF YOUR LAMP DOES NOT LIGHT CHECK PLUG AT THE OUTLET MAKE SURE THE PLUG IS FULLY AND PROPERLY INSERTED INTO THE POWER OUTLET 2 IF LAMP STILL DOES NOT LIGHT UNPLUG FROM OUTLET CHECK THE BULB FOR A BROKEN FILAMENT REPLACE BULB IF NECESSARY PLUG IN LAMP AND TURN IT ON 3 IF THE LAMP STILL DOES NOT LIGHT PLEASE CONTACT YOUR DISTRIBUTOR OR PLACE OF PURCHASE IMPORTANT SAFETY INSTRUCTIONS THIS PORTABLE LAMP HAS A POLARIZED PLUG ONE BLADE 15 WIDER THAN THE OTHER AS A FEATURE TO REDUCE THE RISK OF ELECTRIC SHOCK THIS PLUG WILL FIT IN A POLARIZED OUTLET ONLY ONE WAY IF THE PLUG DOES NOT FIT FULLY IN THE OUTLET REVERSE THE PLUG IF IT STILL DOES NOT FIT CONTACT A QUALIFIED ELECTRICIAN NEVER USE WITH AN EXTENSION CORD UNLESS PLUG CAN BE FULLY INSERTED DO NOT ALTER THE PLUG 07 2014 32594BRZ INSTRUCTIONS2. MODEL 52594 PACKING DIAGRAM FINIAL HARP amp CA TITLE 2 UBBER WASHER SHADE STYROFOAM 12 KGS STYROFOAM 12 KGS UPPER POLE ASSEMBLY MIDDLE POLE AND LOWER POLE CH O O D nr INIAL RUBBER WASHER SHADE 32594SHBRZ REPLACEMENT PART HARP HARP8 5 BNI REPLACEMENT UPPER POLE PULL CHAIN ASSEMBLY SWITCH PPER POLE IDDLE POLE AVAILABLE PARTS ARE HARP8 5 BNI HARP 32594SHBRZ SHADE ASSEMBLY INSTRUCTIONS READ AND SAVE THESE INSTRUCTIONS READ INSTRUCTIONS ALL THE WAY THROUGH PRIOR TO ASSEMBLY THIS LAMP SHOULD TAKE APPROXIMATELY 10 MINUTES TO ASSEMBLE MAKE SURE ALL PARTS ARE FIRMLY TIGHTENED UNPACK THE LAMP YOU SHOULD HAVE RECEIVED THE FOLLOWING PARTS IN THE PACKAGE FINIAL RUBBER WASHER SHADE HARP UPPER POLE ASSEMBLY MIDDLE POLE GLASS TRAY LOWER POLE AND BASE TO PROTECT THE FINISH PLACE ALL PARTS ON A SOFT SURFACE ASSEMBLE THE LAMP 1 CAREFULLY ORGANIZE AND PLACE ALL PARTS ON A SMOOTH FLAT SURFACE LINE UP ALL OF THE PARTS ACCORDING TO THE ASSEMBLY DIAGRAM 2 SCREW THE LOWER POLE TO THE BASE 3 SCREW THE GLASS TRAY TO TOP OF THE LOWER POLE NOTE MAKE SURE THE EDGE OF GLASS TRAY IS LINED UP WITH THE EDGE OF THE METAL FRAME YOU CAN TURN THE GLASS TRAY BY HAND TO GET THE PROPER DIRECTION 4 SCREW THE MIDDLE POLE TO TOP OF THE GLASS TRAY 5 PULL THE EXCESS POWER CORD THROUGH THE BASE 6 SCREW THE UPPER POLE ASSEMBLY TO TOP OF THE MIDDLE POLE
Download Pdf Manuals
Related Search